How do i mount my time capsule so i can repair it with disk utilities?

I'm trying to run disk utilities on my airport extrme base station and it won't work. Please help. thanks

I'm trying to run disk utilities on my airport extrme base station and it won't work.
Do mean to say that you have a hard drive attached to the USB port of the AirPort Extreme?
If yes, Disk Utility cannot "see" a network drive. You must connect the drive directly to your Mac first, and then run Disk Utility on the drive.
Your post mentions Time Capsule, but you may mean to say that you are using Time Machine to try to backup to the drive attached to the USB port on the AirPort Extreme. Might that be the case?
If so, you should be aware that Time Machine backups to a drive at the USB port of the AirPort Exreme are not supported by Apple.
This may likely be the reason that you are having difficutlies....although a few users do seem to be able to make this work.

Similar Messages

  • My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

    My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
    So I can't format the disk in the Time Capsule
    Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
    What can I do?
    Joe

    I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
    In finder use top menu, go, connect to server.
    Type in the following.
    AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
    If that fails..
    try
    SMB://TCname
    Here is the screenshot.
    tardis4 being the name of my TC.
    It should then ask you for your credentials.
    And it should remember them in the keychain and be able to then get TM to connect.

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • How do I connet my time capsule to a new network

    Hey,
    I have a Time Capsule, which is set up to my old wifi. Now I have moved, and my Macbook works with the new wifi, but I can't connet my Time Capsule, my computer can't even find it. How do I setup my time capsule to the new wifi?
    Please help me.....

    The best way is to plug the TC by ethernet to main router in the new place. Reset it to factory.. see instructions and then it will appear in your airport utility.
    You cannot connect to two different wifi signals at the same time.. if you "join the wireless" the TC will perform poorly.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • How do I connect my time capsule to iinet Bob ?

    How do I connect my time capsule to iinet Bob ?
    Just started with iinet naked ADSL, can locate/connect my time capsule - help please

    Bob is ok as a modem.. are you using voip?? If not bridge the bob and use PPPoE client in the TC..
    Or use Bob as a full modem router and bridge the TC.. either setup is much of a muchness.

  • How do i set my time capsule up to function as an external hard drive

    How do i set my time capsule up to function as an external hard drive? Is this even possible? I had a friend tell me it woudl be a good set up to get a time capsule with my Macbook Air to use as a gigantic external hard drive but then was unbale to wlak me through the setup after I bought the equipment. Any suggestions?

    It depends on what you already have equipment wise..
    Just bridge the TC..
    I cannot walk you through it either if you use v6 airport utility.. due to my refusing to run Lion until it gets network issues sorted.
    Download and run the real utility http://support.apple.com/kb/DL1482
    Go to manual setup..
    Internet tab
    Connection sharing.. select off bridge mode in the drop down box.
    You can then if you like turn off wireless under airport wireless.. The TC is now a plain network client with hard disk.
    Personally I would keep the wireless on but sort the channels manually if you already have a wireless AP or router.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • How do I access my time capsule over the internet

    How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

    The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
    Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
    You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
    Google search this.. there is huge number of resources available. eg
    http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

  • HT201945 How do I use my time capsule on an existing WIFI network?

    How do I use my Time Capsule on an existing WIFI network?

    Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
    It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
    Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
    The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

  • How do I connect my time capsule with a Lynksis wi fi netwotk?

    How do I connect my time capsule with a Lynksis wi fi netwotk?

    You cannot extend or repeat a non-apple router in an apple router..
    You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

  • How do I use my time capsule as wifi for my xbox one?

    How does one setup a time capsule to use as a home network to allow Xbox one usage as well?

    set up the time capsule with an iOS device, a Mac or a PC, and then connect the Xbox to the time capsule like with any other router. however, for some Xbox features, you'll need to do specific setting changes. see this thread: Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

  • How do i use my time capsule as a network to store files, etc.?

    How do i use my time capsule as a network to store files, etc.?

    There is no difference in setup..
    Only trouble.. be warned this is quite problematic. With Mavericks even more so.
    See Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Take particular note. The TC is not a NAS or file server.. it can be pressed into use as one.. but will suffer..
    1. Slow spin up of the disk and fast spin down. Causing streaming and library issues with itunes.
    2. iphoto is easily corrupted.. don't move it to a network drive at all.
    3. no backup.. the TC cannot back itself up.. it is designed as a backup target for Time Machine. but Time Machine cannot backup network drives.. and nor did apple build in a backup.. it was never needed. After all it is a backup.. not a file store.
    4. you cannot partition it. You will have issues with TM if you do store both data and TM backups on it.
    5. You can use USB drive plugged into the TC, and experience a new definition of pain and suffering.. well slow file transfer anyway.
    Good luck.

Maybe you are looking for

  • File DownLoad from R/3 to Local Disk through Web Dynpro

    Hi, I have a zebra print spool, to be saved in the local disk. For this, I have an RFC which will store the document in Portal Server KM folder and will give the file name for web dynpro app. The web dynpro app will search the KM Directory, and will

  • Adding a new field to 2LIS_12_VCITM

    Hi Gurus,               I have a standard extractor 2LIS_12_VCITM, the R/3 functional team decided to use to field EXIDV2 instead of EXIDV for tracking. now EXIDV is present in the extractor but since they r using EXIDV2, I need to add that field in

  • Reservation line item text - non update issue

    Hi,    We have a custom BDC (call tran) to create reservation. One of the fields for the reservation is line item text. We had this program from July 2008 onwards and we have no issues. All of sudden from 01/15/09 , the line item text is not being po

  • Burner seems to not want to burn DVD's

    For some reason I can't get my Macbook to complete a burn of a dvd. I have an image file and I have tried both Disco and disk utility and both fail. It's never at the same spot either. I tried zapping the pram but no luck there either. Any ideas?

  • Customer fields do not display in cProj 4.5

    Hello, I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity I am using following steps to do this: 1. Enhance database tables for customer fields 2. Create field groups for customer fields 3. Assign