How do I move a clipping form clipboard onto my desktop?

I liked it when a Command/shift/4 would move the image to my desktop, but now it stays on my clipboard. Do I have to open another ap to be able to unload it to my desktop? It's says, fleetingly, Your image has been moved to your clipboard, click twice to... then the window quickly moves away. Was i supposed to be ablle to double click that fleeting bulliten?

cmd-shift-4 should put it on your desktop.
cmd-ctrl-shift-4 will put it on the clipboard.
Are you also holding down the ctrl key?
If not, check what is set for the screen capture shortcuts here:

Similar Messages

How can I move a clip from one movie to another

How can I move a clip from one movie to another?

If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

How do I move multiple clips at once in the project rather than one a time?

I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

This did not help and that did not work. I had already tried that Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

How do I move all clips from an event into the edit line...

If I have an event of tons of clips that comprise an hour of footage, how can I select all of those clips at once from the event library and transfer them to the edit line above?
There is no Select All feature, that I can see, and it takes forever to highlight each chunk of clips, one at a time, and drag them up.
I'd like to drag the whole 1 hour's worth of clips in one event in my library up to the edit line at once.
Thanks!

Hi Rich,
I am trying to somehow "select all" clips, (not just all shots within a clip), but all 100 or so slips from an entire tape, from the first clip, to the last clip, and everything in between, and move them all up to the edit pane at once.
As it is now, I have to click on a thumbnail, select the entire clip, and move one clip at a time up to the edit pane.
I want to move all the clips up at once.

How do I move a clip with transitions attached on the primary storyline?

One more frustrating problem with the mysterious magnetic timeline: on the priumary storyline I created a text clip with a gap clip on each side, then added cross dissolve at the beginning and end of the clip so that it fades in and out to black:
Now I want to reposition this text in the timeline, mantaining the fade in/out at the head and tails. In FCP7 this was simple as a gap in the timeline simply showed black and the clip could be moved as one piece. In FCPX when I try to move the text clip with the P position tool, the transitions disappear after repositioning. Extremely frustrating:
If I select the clip and the fades together, plus the gap clip at the end, and move them together with the Position tool then the fade out is retained, but the fade in still disappears. I've also tried rolling from the fade in from the gap clip before it, but instead of rolling the clip ahead this shortens the fade (I think the behavior of trimming and rolling transitions is totally wacky). The trim tool is also useless in this situation as you can only select one edit point at a time with it.
The only solution I found is to cut the gap clip before the transition, then move the text clip and transitions with the P tool. This will create two abuting gap clips before the text clip, but allow the transitions to remain intact. Not hard, but annoying to have to do
Often I have to adjust the position of a text clip in the timeline like this after adding the transitions to get the timing right. Is there any way to move the clip while retaining the transitions at the beginning and end? It would be so much easier to be able to roll the edges of the gap clips so that I didn't have to make extra edits and workarounds.
The problem seems to be that the gap clip acts as like a regular black slug video clip in some cases, but not in other case. When you move a clip in the primary storyline a gap clip is automatically created to fill a gap -- okay, fine. But you can roll the edges of a video clip with the P tool, but not a gap clip. ***?
I'm using the latest update, 10.0.8. I will be submitting this to Apple as well....

I am trying to move the text clip forward with the transitions still attached. The difference is that in FCP7 you can leave a gap before a dissolve and it will fade in from black. If you move the text clip, the dissolve moves with it, still attached.
In FCPX however, the gap has to be a gap clip. So the dissolve is attached to both the gap clip and to the text clip. Once you put the dissolve on the edit point, there is no way to move the text clip forward or back on the timeline without deleting the dissolve. Or, if you move the clip forward or back with the Position tool (necessary to create a gap) then the transitions just disappear.
Basically, I am looking to roll the transition with the clip.
I could use the opacity handle on the text clip (using "show video animation") in stead of a dissolve, but then I have no control over the shape of the dissolve curve and I'd have to add extra handles to the text clip to center the dissolve where I want it.
Regarding "I very seldom use the position tool. Rolling the gap clips can be done with the regular arrow tool - *that* is one example of the magnetic timeline working for you."
This is true, but clips behave differently when you you roll with the P tool vs the A tool. With the A tool, other clips are magnetically rippled forward or back on the timeline to maintain their relative relationship and avoid all gaps. With the P tool, video clips maintain their position on the timeline, creating or trimming gap clips when a gap is created or filled. The problem arises when a transition is attached to the clip you are moving or trimming.
I understand in priniciple why it behaves the way it does, but it's inconvenient in this case, and inconsistent with the normal behavior of gap clips when a transition isn't involved.
In my mind the transition should be anchored to the video clip, not to both the video and gap clip when there is a transition between the two.

How do i move my itune form one computer to another

how do i move my itunes from one computer to another

Backup with this User Tip, restore the library to the new computer using the same tool, keep the backup up-to-date in future.
Deauhorise the old computer if you no long want to access protected content from it.
tt2

How do you move a clip just a few frames relative to another clip?

I am having a lot of trouble trying to move video and audio clips in the timeline. One key seems to be to use the Option key to select both video and audio. If you don't use Option, you only get the video or the audio.
At present I have a clip on V1 and A1, A2, and another clip on V2, A3,A4. The videos and audio of the 2 clips overlap and I am trying to move the clip on V1,A1,A2 relative to the other clip so that the audio waveforms line up and I can get a contijuous sequence. I can get the overlap fairly close but not close enough. Is there a way to move a clip just one or two frames? Everytime I move the V1 clip, the playhead jumps to the end of the clip.
What am I doing wrong?

I had a lot of trouble trying to move audio and video tracks together. The clip tended to be copied so often and the playhead would jump so I didn't know where I was or what had happened. When just the audio is moved, this doesn't seem to happen. For large moves, I just drag the audio to within a few frames or so of sync. Then I use + - for the last few frames and to check that sync is not off by a whole frame. Usually there's a little bit of out-of-sync audio but it either disappears on playback or it's not noticable.
I also adjusted the mouse characteristics with respect to speed of double-clicking and this seems to have helped.

How do I move a picture from iPhoto to my desktop?

For: Macbook Pro running OSX Lion 10.7.5
How do I move a picture from my iPhoto to my desktop?

Or... Export it.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

HT1229 How do I move photos from iphoto library to my desktop

How do I move photos from iphoto library to my desktop

This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How do I move video clips to specific points on a music track in iMovie?

I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...

Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W

How do i move a clip on timeline a frame at a time

Hi
I have cs6.
I am having problems moving clips slightly on the timeline, ie frame by frame, when i try to move I dont get the fine control, it jumps a second.
How do I get fine control?
Also, with cs5.5 I could zoom in/out of the timeline, using the 'mountains' to drazg right left etc. I dont have this on CS6 ?? any ideas
Many thanks
Chris Anderson

If your mouse is over the zoom/scroller bar (in the timeline or below any of the monitors):
it will zoom in and out just by rolling the wheel
SHIFT + wheel makes it zoom faster
ALT + wheel makes it pan
ALT + SHIFT + wheel = pan faster

HT4589 How do I move video clip clip up or down after setting letterbox, i used to be able to do this until i upgraded to 10.0.6

I used to be able to manually move my video clip up and down in the event the browser using one of the settings. It was a vertical settings that i would use to pull a video clip down after i applied a letterbox to the clip, so I could see the top of the the video clip that got blocked out by the letterbox. Still looking no luck....I used to be able to do this just upgraded to FCPX 10.0.6 now i dont have the setting..

think i might have solved my own problem the feature is not there i have to upgrade again to 10.0.7...this is getting annoying...

How do you move a clip from one event to a different event

Can't find anyway to do this. Seems pretty likely I'm overlooking the obvious.

Not sure what you mean. If you mean move clips from one event to another, you can just drag them in the Libraries pane. Or go to the File menu and use the Move Clip command.
If you mean from one project timeline to another, use copy and paste. Or just edit the edited source clip from the event in the browser to the other timeline.
Russ

How can I move a clip on the timeline less than one frame?

I need to move an audio clip on the timeline to match the video but it snaps one frame at a time and I need to move it less than that.?

I've just had a look.
Try
Edit
Keyboard Shortcuts
Panels
Program Monitor Panel
Program Monitor Panel Menu
You should then find this:
You can then set up your preferred shortcut key.

How do I move and install Lightroom 5 onto another comupter?

I have Lightroom 5 installed on a laptop (Windows 7), but want to get the program downloaded to a new desktop that runs on Windows 8. The videos are great, but cover copying photo files, and don't explain the best way to get Lightroom downloaded to another computer. I know I can't keep it on the laptop once I move it over, which is fine, just don't know how to do that first step. Any help appreciated.

If you have it as part of Creative Cloud, then install it via adobe.com otherwise install it from the same media you used for the laptop. Note that you can have it installed on both the desktop and the laptop as long as you only use one machine at a time.

How do I move a clipping form clipboard onto my desktop?

Similar Messages

Maybe you are looking for