How do I move a compound clip from time line to an event in event library

How do I move a compound clip made in the time line into the event library to store it for latter use?

With *no other* clips selected, you can create a New Compound Clip (right click and select from popup) in the Event browser; Copy the compound clip in the storyline; double click new empty compound clip to open it in its own timeline and paste the copied compound clip. When you go back to the storyline, the compound clip in the Event browser is updated with the newly pasted compound clip item. If you want to uncompound the stored clips, when in the New compound's timeline, right click on the pasted compound and select Break Apart Clip Items...  The only problem you run into if you break items apart is if you have Effects applied to the storyline compound clip, you will lose those effects because the "new" compound in the Event browser will not have those effects and you can't copy/paste effects back into the Event browser, only items in a timeline.
HTH

Similar Messages

  • How do I move a compound clip in one event to another event when it is used in a project?

    I've been using FCPX since 10.0.3. The recent upgrade to 10.1 is forcing me to reorganize everything. At some point during the upgrade cycle, Apple decided to store ALL compound clips inside events, automatically, upon creation. I was oblivious to this decision at first. So here's what happened as a result.
    I have 10 projects, numbered 1 through 10. My goal was to have one event for each project. However, it looks like most of my compound clips from my later projects got automatically created and placed in the first event (Video 1) instead of in the correctly numbered event. I'm pretty sure the clips INSIDE the compound clips are referencing the correct event; it's just the compound clip itself that resides in the wrong event. I'd like to move these compound clips over to the event they SHOULD have been created in, in the first place. However, I'm not sure if dragging and dropping them to the correct event will (a) create a new copy of the compound clip (one that is not referenced by any project whatsoever), or (b) move the original compound clip to the right event (removing it from the original/wrong event). Also, I'm really concerned about this, because I'm not sure how this affects the compound clip as used inside the actual project. I often have certain effects, color correction, etc. applied to the compound clip itself, and I don't want to lose that.
    Any advice would be greatly appreciated. I really want to get these clips in order.

    You can freely drag compound clips between events as you've seen.
    If you do this between events in the same library, it will be a move by default; holding down the Option key will make it a copy operation.
    If you drag between events in different libraries, this will be a copy operation. All clips contained in the compound clip will also be copied (or references as sym links) to the target library in order to keep the library completely self-contained (libraries never references each other and never span volumes).
    Mark

  • How do I move a video clip from one event folder to another?

    Today I imported a bunch of old VHS based analog videos. I imported them all into one event library folder.
    Now I want to move some of the clips into a new event folder so I can keep all the folders properly organized with what is in them.
    When I highlight the selected video clip (I put the yellow border around the video I want to move) and I drop and drag the clip into the new folder imovie 11 asks if I want to move the selected clip. I answer yes, it seems to move the clip BUT it moves the WHOLE CLIP NOT just the part I selected.
    I can't seem to make a cut in the video and separate it out.
    How do I get the video I selected into the new event folder?

    The short answer is that you can't.  Purchases are tied to the AppleID used to buy them.  AppleID's cannot be merged, and the content cannot be transferred.

  • How do I store a compound clip for later use or another project?

    I created a compound clip, then lifted it from story line and disabled it, its darkened (invisible doesnt play in the viewer),
    however its space runs as black empty frames when I play over it.
    I want to do 2 things:
    I wanted the footage proceeding it to shift in left to fill that black void and play, as the compound clip is "hidden". Is this possible?
    I also wanted to save that compound clip for use later in this project and possibly in another project, can I save it out as a separate clip set?

    I think I got it, lift the compound clip from storyline by right clicking and choosing "lift from storyline",
    drag the compound clip left or right out of its original position, select the grey slate where it used to be in the time line,  and hit delete. the clips to the right now shift left to fill its void.
    and the compound clip is automatically available in the event library folder its grouped clips originated from but now shown as a compound clip once you create that compound clip..

  • How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?

    How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?  (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • How can I import an m4v movie from my desktop to my event Library in iMovie?

    How can I import an m4v movie from my desktop to my event Library in iMovie?  I want to include the m4v movie into another project in iMovie.

    When you import DV Stream from tape, iMovie 11 will assume that you are importing raw footage from a camera, rather than a finished movie. It will create a new clip everytime it detects a scene break (the record start/stop button was pressed). These clips will be placed in chronolgical order - not the order they were on the tape.
    One way around this is to import the tape into the application that you used to create it. For example, if you used iMovie 6, import the tape back into imovie 6. In iMovie 6, you can export the tape back out using FILE/EXPORT USING QUICKTIME. Choose the DV codec in an MOV container.  You can then import this MOV file into iMovie 11 and have everything in the proper order for your finished movie.
    Another option is to use FInal Cut Pro X.

  • How do i move a video file from the theater to the library for more editing? New version of iMovie.

    How do I move a video file from theater to the library for additional editing in iMovie. It is a new iMac so i guess i have the newest version of iMovie.

    Hi hilldw61,
    Welcome to the Apple Support Communities!
    I understand that you have added a clip or project to iMovie Theater but would like to continue working on it. When you upload the project to iMovie Theater, the original project remains in iMovie where you can edit it further. 
    Add, remove, and play clips and projects in iMovie Theater - iMovie Help
    Best regards,
    Joe

  • How do you move a sound clip in the timeline?

    I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

    Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
    As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
    Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
    Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
    I will use your suggestions for using .WAV files. Thank you again. 
    Terry Lee Martin
    Date: Mon, 7 Sep 2009 14:29:37 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you move a sound clip in the timeline?
    Terry,
    What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
    If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
    Good luck, and let us know how it goes please,
    Hunt
    >

  • Move a Compound Clip to another project?

    is there any way to move a compound clip in FCPx from one project to another?? I tried copying and pasting but am not having success... it just just pastes something that I copied earlier. Any ideas?? Thanks!

    Jim is right.  I also do this all the time.  In fact I "park" several compound clips that I want to reuse in a project made just for that purpose.  Then I go into that project, select the compound clip and do the Command C to copy it.  Then I exit out of that project and go into the project I want the clip to be copied to.  I then (IMPORTANT) click somewhere in the timeline and do a Command V to paste it there.  No problems.  The only problems I sometimes have is with embedded titles that occasionally loose the text in the first or second title in a series that might have been enclosed in the compound clip.  Other than that it works great. By the way, since you are talking about "moving" the compound clip instead of "copying" it, you could use a Command X to cut then the Command V to paste, but that's rather severe and might not survive as a clip should your project crash or some unlikely thing on your way to the new project.  If you really want to move it, just copy then paste then go back to the original project and delete it there.  Best wishes.
    stephen

  • Deleting a Compound Clip from Finder

    Hi,
    I edited a couple of compound clips earlier this week and ever since then whenever I open FCPX it takes 30+ minutes to load the event and start up. At first I thought the problem was the size of the event, so I deleted some unused media and made it about half the size. Still, the load time remained the same. Now, after sitting through an hour of waiting for FCP to open, I'm trying to delete the two compound clips I edited right before the load time problems began, thinking perhaps one of them is corrupt and causing the ridiculous load time. However, whenever I try to do anything in Final Cut I get a "working" rainbow wheel that never seems to go away until I force quit, and if I do that I have to sit through another painfully long start up load time.
    So basically FCP takes forever to open, then forever to do any action, even something as simple as copy and paste, when this event is loaded.
    Is there a way to delete compound clips from the Finder WITHOUT opening FCP?
    I am using FCP 10.0.9 on an iMac with a 3.4 GHz Intel Core i7 processor and 32gb of memory, running OSX 10.8.5.
    Would appreciate any help!

    If you want to get rid of the compound clips and you have used them in your project, you'll have to first trash or hide the project.  Then open the app and you should be able to delete the compound clips. Close the app and move the project back to its original location.
    If it's still slow to open, it's also possible that you have some bad render files. Turn off BG Rendering and delete both project render files and event render files.
    Russ

  • How can I move an icon/file from one screen of my ipad to another?

    How can I move an icon/file from one screen on my ipad to another?

    Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

  • How can I move an original Version from one Project to another Project?

    How can I move an original Version from one Project to another Project?

    From the Aperture User Manual:
    To move an image into a different project
    Drag the image [from the Browser] into another project in the Library inspector.

  • How do I move my itunes account from one country to another?

    How do I move my itunes account from one country to another?  I set up my itunes account in the United States and now I live in England.  I would like to transfer my purchases from my US account to my British account and then download them onto my new ipod.  I have uninstalled and reinstalled Itunes and I have updated my Windows 7 operating system.  I have tried to get in touch with apple and the advisor said he could not help me.  Ideas? 

    Before you change the country, note the following:
    - you must use any remaining store credit on your account
    - download all purchased content
    - ensure you have no current rentals(if you do, you'll have to wait for them to expire)
    - provide a new payment(such as a credit or debit card) associated with a valid billing address in the UK or an iTunes Gift Card purchased in the UK
    - content purchased from the iTunes Store is country-specific. If you wish to upgrade any of your iTunes Store content to iTunes Plus, you'll need to do this before you change countries. The content you purchased while your account was set to the previous country will not be eligible for upgrade once you've changed countries.
    - after you change countries, you will no longer receive application update notifications in iTunes for the apps you purchased in your original country. However, you'll still receive update notifications on your iOS device for any applications installed on it. In addition, you'll be able to download previously purchased applications again for free if they are available on your new country's store. You will not be charged and the download will not appear on your Purchased page. If a previously purchased application is not available in your new country, you will not be able to download it again for free.
    - If you have an iTunes Match subscription, you can't change countries until the subscription has expired.
    - If you have purchased a Season Pass, you cannot change the country associated with your account until that season is done airing and the last episode of the season has been added to the iTunes Store.
    Taking the above into consideration, here's how to change your country:
    1. Open iTunes and click Sign In.
    2. Enter your iTunes Store account name and password, then click Account Info.
    3. On the Apple Account Information page, click Change Country or Region.
    4. Enter the updated information and save your changes.

  • How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

    How do I move all my files from one User Profile (account) into another?
    I needed to create a new account and want all of my files accessible in the new one.

    ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
    now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
    the start of that tree is /
    so, if you were to do:
    cd /
    (cd means change directory)
    it will bring you at the highest branch of the file system.
    cd /Users
    will bring you to where all the users are.
    to see whats in /Users you can use your friend ls command
    ls means list files/directories
    so:
    cd /Users
    ls -la
    (the -la here means show all (even hidden) and long format (very verbose))  this flag is very optional.
    you will see
    fred
    user2
    for example.
    if you want to see the desktop of user2 you would change directory to it then list the files.
    for example:
    cd /Users/user2/Desktop
    Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
    ls -la
    you should then be able to see everything in users2 desktop
    you could have done as well the same thing in smaller steps, for example:
    cd /
    cd Users
    cd user2
    cd Desktop
    this is the equivalent of cd /Users/user2/Desktop
    So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
    /Users/user2
    which most likely the file you had created from the other user was in /Users/user1
    if you copied all the files from /Users/original_user to /Users/secondUser
    most likely yes, all your mail, bookmarks etc would be copied over.
    so in your case.
    sudo chown -R seconduser:staff /Users/secondUser
    should work
    Remember that if you start a path with the character /  it means start from the root of the file system, at the highest top you can ever get.
    so
    cd /Users/fred
    is not the same as
    cd Users/fred
    unless you were in / already
    i know it may be confusing at first but it's actually very logical if you play with it.
    to simplify, think of it that / means C:\  on windows
    you can't go any higher than C:\  (in a way)
    if you're unsure which directory you're currently in, you can always type:
    pwd
    it will tell you where you are.
    for example:
    cd /
    pwd
    this shows  /
    cd Users
    pwd
    this now shows /Users
    cd /System/Library
    pwd will show /System/Library
    cd /
    cd /Users
    cd fred
    cd Library
    pwd will show /Users/fred/Library
    unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
    so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
    ls -la  (this shows all the files where you are)
    if you see myfile in the list
    do a pwd
    whatever is return, the real location of the file would be:
    whatever pwd returned / myfile
    I hope that makes sense.

  • How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

    How can I move photos in iPhoto from the WEB Photo Stream or WEB Facebook to one of my Events?

    From PhotoStream either drag the photos form PS to the iPhoto window or set the iPhoto peference to automatically import PS photos
    From Facebook save to isk and import from there
    LN

Maybe you are looking for