How do I move a table to a different spreadsheet (or tab)
I have a travel document which used to be three spreadsheets (Resources, Upcoming trips, Old trips), each of which had a separate table for each of my trips with a checklist of the things I need to do to prepare for and complete a trip.
In Numbers 3, the old spreadsheets show up as separate tabs (canvases? I'm not sure of the terminology), and each table is a separate item on that tab/canvas.
I want to be able to move a table (trip) from the Upcoming tab to the Old tab when the trip is over.
How do I move a table from one tab/canvas to another???
James,
Always make copies of your important documents, or use simple scratch documents, when trying suggestions until you are comfortable with them.
It takes a bit of a leap of faith, but I've found that if I Cut (Command-X) a Table or Chart from one Sheet and Paste into another Sheet, that's the same as moving, and all works out well.
Unlike the previous version of Numbers, there doesn't seem to be a way to drag objects from sheet to sheet.
Jerry
Similar Messages
-
Numbers 3.1: How do I move a table into a different sheet?
I have just decided to bite the bullet and start using Numbers 3.1. One immediate problem I have found is to know how to move a table from one sheet into another. It used to be simple, but now I can't find how to do it. I have seatched Help and Tutorials, but can't find anything, and I am in a hurry. HELP!
Hi Mr. Jinks,
Thanks to all of you who suggested cutting the table and pasting it into an alternative sheet. The problem I now have is that this does not work where cells are referenced by calculations in other tables
But I think links between tables can work fine if you want them to. Here's what I see on my machine:
On Sheet 1, a formula in Table 2 referring to Table 1:
Here's Table 2 cut and pasted to Sheet 2, formula intact, referring to Table 1 on Sheet 1.
If you want the tables on separate sheets, move the table whose formulas refer to a separate source table.
SG -
How do I move a table from one schema to another schema on Oracle XE?
How do I move a table from one schema to another schema on Oracle XE?
Hi,
I tried to use the insert/select statement that you had given, it did not work.
The error is ORA-00913: too many values.
But finally what I did was, I went into the system schema where the table was and generated the DDL through the utilities and afterwards I imported them into the schema that I am currently working on. It solved the problem!
However I am still curious to know why the insert/select statement did not work? Do you know any site/tutorial which gives a real time example?
Thank you
Skye -
How do I move a table from one schema to another schema?
How do I move a table from one schema to another schema?
Grant access to the table from the source schema to destination schema.
GRANT SELECT ON <TABLE_NAME> TO <DESTINATION SCHEMA>A simple way would be to use CREATE Table with select syntax (in destination schema)
CREATE TABLE <TABLE_NAME> AS SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME><li>However, you would be in <b><u>trouble when the table has index,constraints and triggers</u></b>.
So you can better of grab the DDL statement of the table(and any additional components) andd then create the table in the destination schema.You can use SQL developer, Toad or Apex's Object browser for this.
After the table is created, Insert the records using SELECT.
INSERT INTO <TABLE_NAME> SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME>This question is discussed in great detail in this <b>AskTom thread</b> -
How to transport/move a table with data from development to Test to Production
Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
SriHi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek -
How can I move all my bookmarks from different Firefox profiles (would like to move whole bookmark folders at once if possible) into one area to organize them and then place them into the different Firefox profiles? This is all under one window user account, I am using windows 8.1. Even if you have information on how to do it on a different windows, it may still be helpful. Thanks for any input you have.
Just a note about the difference between these two things:
* "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
* "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
Related support articles:
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Import Bookmarks from a HTML file]]
* [[Restore bookmarks from backup or move them to another computer]]
Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites]. -
How do I move a table in Dreamweaver CS4?
Hi,
I am creating my home page in Dreamweaver CS4 and I made a table. I cannot figure out how to move the table up to the top of the page where I want it. Any ideas on how to move a table?
Thanks,
ashmic19Add this to your CSS code:
body {margin:0; padding:0}
And your table code should begin immediately after the <body> tag in your HTML.
<body>
<table>
<tr>
<td> something here</td>
</tr>
</table>
</body>
Incidentally, table-based layouts are NOT the best approach. You might like to take this opportunity to learn how to work with CSS Layouts. It is the modern web standard.
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
HELP! How do I move a table?
Hi everyone,
I would be eternally grateful if someone could tell me how to
move a table in CS3? I've looked everywhere online and I can't find
an answer.
Once I add a table to a page, I want to be able to
basically drag it within that same page....HELP!You 'move' page elements by building an underlying HTML
structure that
allows your element to be placed where you want it. You do
not drag it on
the screen.
Using DW without a familiarity with the concepts of HTML (and
hopefully with
CSS) will surely be a tremendously frustrating experience for
you, I fear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Novice E" <[email protected]> wrote in
message
news:g7ia0g$elt$[email protected]..
> Hi everyone,
>
> I would be eternally grateful if someone could tell me
how to move a table
> in CS3? I've looked everywhere online and I can't find
an
> answer. -
How do I move a table with radio buttons to another page?
I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.
-
How Do I Move Folders of Photos to Different Hard Disk?
LR 5.2
Windows 7 Pro
How do I move numerous folders and subfolders of photos to a different hard drive?
The hard drive I want to move to shows up in the LR Library Left Panel under Folders, but I can't drag and drop the photos from the C Drive to this D drive.
I have been working with LR for about a month; and I've uploaded about 2000 photos I have taken since about a year ago; organized by folders for year and date. I just realized LR has been putting almost all my photos on my C Drive. There is one folder of photos in LR on the D Drive. I don't recall how I got that folder to go on the D Drive while the rest are on the C Drive.
I don't want any data on my C Drive. I use my C Drive primarily for my Operating Systems and applications.I am trying something else now.
I am trying to move the files in LR. Using the Import Window, I select Move. I can see the photos, but they are grayed out, and I can't "Check" them. Weird.
2nd wierd thing: I can make the Destination the D drive. But the folder on my actual D Drive is My Pictures. In the Destination panel, LR doesn't see "My Pictures." It does however, see a folder named "Pictures" and that contains subfolders for the last 14 years of my photos.
I do have 14 subfolders with 14 years of photos in them on the D drive, but in a folder named My Photos, not Pictures. There is no folder named Pictures on that drive.
It looks like LR has arbitrarily, on it's own, renamed one of my folders (and locate in it's new alphabetic position amongst all the other folders at the same level of heirarchy) in it's display. How is that possible?
That being said, the Import window is grayed out and I am not being allowed to proceed. -
How to store movies & TV shows in a different location
Hi there!
I've seen many of you asking (unfortunatelly with no clear answer) how to store movies & TV shows into another location away from the iTunes Music folder. This idea is to store videos on an AirDisk drive and keep music on the MacBook for example!
I've been trying to do so in the past few days but some pb have occured...
- it is possible to replace the Movies folder by an alias pointing to a Movies folder in the AirDisk drive: existing movies will be playable in iTunes.... the problem is that when I try to add new movies iTunes do not store them into the Movies folder on the AirDisk but in the local music folder (very strange as it is a video file!).
Has anyone succeeded in using such mechanisms?!
Many thanks for your answers!
Guillaume,kazbe81 wrote:
I've got a couple of movies and tv shows that I've deleted from my purchase list on itunes as well as my download file on my computer but they are still on my itunes in the cloud does anyone know how I can delete these?
You cannot delete them from iCloud.
They are purchased and will always be available in iTunes in iCloud for you to download again if you wish. -
How Do I Move A Table in DW8?
In DW8 I want to be able to move tables around. Currently I'm
drawing them on layers, then moving the layers around, but a layer
position in DW is different when you preview in browser whereas
tables seem to be the same. This makes designing a lot of guess
work, and I'm concerned about the variance showing up in other
browsers making my design look weird. I've been on Lynda.com on the
DW8 Essentials course which is fantastic, but nothing on how to do
this. Anyone have any tips for me on this?> When I tried, the layers would move around
> unexpectedly when resizing the browser window.
Layers don't move. What you saw was the rest of the page
moving away from
the absolutely positioned elements.
> Plus I've visited websites
> that use layers, even high-profile, well-known sites,
and the layers often
> overlap other content, making both unreadable.
This is indeed the hallmark of a poorly informed webmaster.
Using layers
for layout is a typical mistake made by the inexperienced.
> In the old days, I think layers were supposed to
> be merged within Dreamweaver to create some kind of
complex table layout
> that would be difficult to pull off with HTML alone.
I have no idea where you got that idea. It's not one I have
ever seen
promoted.
> But my experience with
> them is that they're nothing but trash: an attempt to
make web design
> easier
> for people who love dragging things around the screen.
This is just nonsense. Layers are not a DW invention -
absolute positioning
is a legitimate part of CSS. When used properly, it can be
exceptionally
valuable.
> Maybe it was lousy implementation or errors on the part
of the webmaster,
> but these were websites you wouldn't expect to find
those kinds of errors
> on.
That's exactly what it was.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Damaeus" <[email protected]> wrote in
message
news:[email protected]...
> Reading from news:macromedia.dreamweaver,
> "Fugasi" <[email protected]> posted:
>
>> In DW8 I want to be able to move tables around.
Currently I'm
>> drawing them on layers, then moving the layers
around, but a
>> layer position in DW is different when you preview
in browser
>> whereas tables seem to be the same. This makes
designing a lot
>> of guess work, and I'm concerned about the variance
showing up in
>> other browsers making my design look weird. I've
been on
>> Lynda.com on the DW8 Essentials course which is
fantastic, but
>> nothing on how to do this. Anyone have any tips for
me on this?
>
> I've never liked working with layers in Dreamweaver, so
I just don't use
> them, and haven't even tried since Dreamweaver 3. I've
never been able to
> get them to display properly. When I tried, the layers
would move around
> unexpectedly when resizing the browser window. Plus I've
visited websites
> that use layers, even high-profile, well-known sites,
and the layers often
> overlap other content, making both unreadable.
>
> I like the idea of layers. In the old days, I think
layers were supposed
> to
> be merged within Dreamweaver to create some kind of
complex table layout
> that would be difficult to pull off with HTML alone. But
my experience
> with
> them is that they're nothing but trash: an attempt to
make web design
> easier
> for people who love dragging things around the screen.
Sure, it increases
> productivity, and when you're on a time crunch, dragging
layers around to
> fit everything where you want it is a lot easier than
adjusting table
> widths, nesting tables within tables to get spacings
just right, etc...,
> but
> the reward is usually a site that is both aligned
properly *AND* does not
> have overlapping elements that make it sometimes
unusable. I've even had
> layers on high-profile websites prevent me from using
certain content, so
> the site was, literally, unusable.
>
> Maybe it was lousy implementation or errors on the part
of the webmaster,
> but these were websites you wouldn't expect to find
those kinds of errors
> on.
>
> Damaeus -
How do I move a table within Pages on my iPad
Seems like it should be fairly easy as the directions just say to "highlight the top corner and drag it" - however, for the life of me this will not work. I have tried tapping, one finger, two finger etc. and it won't budge.
I'm using an iPad 3 with the newest version of pages... what I am trying to do is have two tables side by side on the page and this shouldn't be that difficult.
Thanks in advance for any help!Turn off 'Wrap' > 'Move with Text'.
-
How to populate an internal table from three different tables
My requirement is to populate an itab by retrieving data from three diff db tables,
ekko,ekpo and Ekbe.
below is the code for data retrieval .
SELECT EBELN INTO TABLE IT_EKKO FROM EKKO WHERE EBELN IN S_EBELN.
IF NOT IT_EKKO[] IS INITIAL.
SELECT EBELP TXZ01 NETWR BUKRS INTO CORRESPONDING FIELDS OF TABLE IT_EKPO FROM EKPO FOR ALL ENTRIES IN IT_EKKO
WHERE EBELN EQ IT_EKKO-EBELN.
IF NOT IT_EKPO[] IS INITIAL.
SELECT EMATN WAERS WERKS GJAHR BEWTP INTO CORRESPONDING FIELDS OF TABLE IT_EKBE FROM EKBE FOR ALL ENTRIES IN IT_EKPO
WHERE EBELN EQ IT_EKPO-EBELN
AND EBELP EQ IT_EKPO-EBELP
AND BEWTP EQ 'E' OR BEWTP EQ 'Q'.
ENDIF.
ENDIF.
please tell me how to populate data from it_ekko,it_ekpo and it_ekbe into an internal table ITAB.Hi Mayana,
You take one final structure & final internal table, & within that structure take all the fields which is required to be displayed as a final output.
for data fetching from different table, you take three different structures & three internal table for that, because into corresponding fields of table is not good for performance wise. Use into table syntax.
follow the below example:(similarly)
sort it_klah by key fields.
LOOP AT IT_KSSK INTO WA_KSSK.
READ TABLE IT_KLAH INTO WA_KLAH WITH KEY CLINT = WA_KSSK-CLINT
KLART = WA_KSSK-KLART.
IF SY-SUBRC EQ 0.
MOVE: WA_KLAH-OBJEK to WA_final-OBJEK.
Read another table........(2nd one)
IF SY-SUBRC EQ 0.
MOVE: ....................................
APPEND WA_final TO IT_final.
ENDIF.
clear wa_final.
ENDLOOP.
finally display it_final records.
Hope this can solve your problems.
Regards,
Tutun -
How do you move imported iMovie events to different drive?
Hi there,
I'd like to import my entire iMovie event library (200+ GB) into Final Cut Pro X, but I can't figure out how to get the imported events to live anywhere besides the startup disk.
Here's my process so far:
Use FCPX's feature to import my entire iMovie event library. Make tea.
I don't seem to be able to choose which drive to import to, so they end up on the startup disk at ~/Movies/Final Cut Events
No worries! FCPX is a media management superhero. I just use the FCPX event browser to drag the events to my external drive.
Make more tea while all the events are moved to my external.
So far so good! My ~/Movies/Final Cut Events folder is clean, and my /Volumes/ExternalDrive/Final Cut Events folder is full.
Now let's test updating my imported library by clicking to import the library a second time. (Dialog confirms my impression that only new material will be copied.)
Result: Oh no! My entire iMovie event library is re-imported to the startup disk. Now I have two copies of each event in FCPX (not to mention the original copy in iMovie events -- oi my hard drives are filling up fast.)
So:
How do I get FCPX to import my iMovie event library to a drive other than startup? I love the idea of being able to periodically sync my iMovie events to FCPX, but it's not going to be possible if those events are required to live on my startup disk.
Thanks for any help,
- cantonYou really don't want to share the Events folder even if you could. If any other application changes (or sometimes even opens) a clip in a FCPX Event, FCPX will offline that clip with no easy way to relink it.
I'm surprised your Android phone footage isn't supported; what is the codec/format? Have you tried importing it after copying the files to the hard drive and using "Import Files" as opposed to importing from the "camera" directly?
My strong recommendation would be to keep the Events separate; use iMovie for android footage only, and FCPX for everything else. When FCPX supports the footage in the way you want, import them at that time and start using FCPX exclusively.
List of FCPX supported formats: http://help.apple.com/finalcutpro/mac/10.0/#ver2833f855
Maybe you are looking for
-
Can you restore ipod touch by using serial No
My friend give me the ipod because he forgot his password and i ask can i have it and he said yes
-
Image in panel not available right away?
I'm sure this simple beginner's question has been answered scores of times but I can't find a working explaination. I have a class, ImagePanel, that extends jPanel. public class ImagePanel extends JPanel implements Serializable { Image image = nu
-
When I go take pictures I cant see nothing, is all black and I cant take pictures.
-
I can not see and play my movies on my iPad.
When I enter "Movies" it is just black. I have tried to sync the iPad with my computer again but nothing happens. Does someone with a similar problem have a solution? Thanks!
-
Faster video conversions than itunes?
ive tried usind the itunes video conversions and its agonizing slow is there any program i can download thats faster at converting videos to mp4?