How do I move clips between projects?

Should be a simple enough task but, how do I move clips made in one project to another project?

clip media is not conained within a project per se, rather it is referenced by a project, so as long as the media is on the hard disc then it can be referenced by as many projects as you'd like.
you can open multiple projects simultaneously ... then to move clips between the projects you can just drag and drop between the various projects' bins, or copy and paste if you prefer.

Similar Messages

How do I move photos between projects if the photo is published in Flickr/Facebook

I have a TOSORT project in my library that I use to triage photos as they come in. I go through and work on the photos and then move them to an appropriate library. I made the mistake of accidentally publishing some photos to Flickr/Facebook from this folder and now I can't seem to move them out. Any tips/tricks I am missing?

The answer is that you cannot do a complete Move so long as the FB/Flickr album exists. See:
https://discussions.apple.com/message/15137918#15137918
Ernie

Moving clips between projects, without rendering them

Is this possible? I work on a Macbook Pro, using CS4 production premium. How can I move clips between projects in PP CS4?
I KNOW there's a way. Just can't figure it out.
Thanks!

The easiest, IMO, is to Open your source Project and remove everything that will not be needed. Do a Save_As. Import that Save_As Project into your new one. Be sure to then twirl open the Bins, and Dbl-click on the Save_As Project's Timeline.
Hunt
PS I also go to Project and choose Delete Unused (or similar syntax) to clean things up for the Save_As.
Message was edited by: the_wine_snob Added PS

Move clips between computers

I have a desktop and laptop, and wish to be able to move clips and projects between the machines as i work on them.
Ideally i would like ot have them on my NAS but really struggling with the interface, i cannot even find a way to export anything unless its a project.
Problem is iwhile i am away i download to my laptop, but want to work on the projects on my desktop.
I am using version 10.0.1, which is confusing as i believe its the latest version but there is much on here about imovie 11!
I am fairly new to mac, and completely new to imovie,

The phrasing of your last sentence suggests you did not install FCE from a DVD. If you didn't it is highly likely that it is incorrectly installed.
If this is so, run http://www.digitalrebellion.com/fcs_remover.htm to completely remove all traces before reinstalling properly.

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

How do i move clips from home video to roll?

how do i move clips from home video to roll?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to control movie clips using mause scroller...?

....please look
http://www.nagaoka-id.ac.jp/gallery/gallery.html
...how to control movie clips using mause scroller...?

Hi Ldavinci, I have noticed your posts on that particular
site before. Just chiming in here... don't be afraid of Flash Help
menu. There's a wealth of information there and I've found it much
faster than waiting for a response from the forum. Then if it still
doesn't make sense, at least you have a basic idea of specifics to
ask.
If you search for mouse wheel, you'll see an example under
the Actionscript 2.0 Language Reference on this topic. That said,
here's the example:

How to resize movie clip dynamically

how to resize movie clip sccording the stage size and width

how to resize movie clip sccording the stage size and width

How do you move events and projects between Libraries in iMove 10

I am running OSX 10.9.5 (Mavericks) & iMovie 10.0.5.
I am trying to free up space on my internal 1TB hard drive and want to archive events and completed projects onto an external hard drive, which has a second iMove v10 Library on. Under V9 of iMovie this function was easy, but I am struggling under V10.
What is the correct way to move events between libraries in iMovie.
When I attach the external drive containing my second iMovie Library, open it I can see all existing events stored (by move) under version 9 of iMovie.
Reading the Help (extract below) for this function it implies highlight the Event to move & then drag & drop into the second Library.
Shift+CMD with drag and drop onto the second library at the library name level will move Events that are not tied to a project, but for completed projects (Finalized under V9 or shared for example with iTunes in V10) it seems these can not be moved, the above function only copies them to the second library.
I have tried all different combinations of the Fn, Ctrl, Option CMD keys etc with and without SHIFT and the ones that work for this function only copy the event. I can not seem to get an event moved once attached to a project. File - Move Event will also move Events not tied to a completed project.
I have also tried copy to a second Library & then to delete the original events. Again it appears you can not delete events tied to a Project.
What I have also not been able to find is how to move a finalised Project to another Library and then see if events attached to that project would then move.
I have been able to move Events not tied to a Project to the second Library, then create a new project within this Library. This helps with all new projects & future import of Events. But does not help me free up current space by archiving.
Extract from help
Copy or move projects, events, or clips between libraries or storage devices
         Connect a storage device that contains the target library to your Mac, or copy the target library to your Mac.
         Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries, locate an existing library on your Mac, or create a new library.The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
         In the Libraries list, select the event that contains the item you want to move or copy.
         In the browser, select the item you want to move or copy.Tip: To select multiple clips or projects in the same library, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
         Do one of the following:
To move items between events or libraries: Drag the clip or project to another event or library.
To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
Would appreciate any help on this matter.
Thanks
Colroy

Further to my original post below; I have done further analysis and it seams that if you have events tied to a project (mine are all finalised) you can not move events between Libraries. However, events that are not tied to a project can be moved. Either by Shift CMD or by using File- Move event.
What I have not been able to find is how to move a finalised Project to another Library and then see if events attached to that project would then move.
Copy works for events attached to a project. I have also tried copy to a second Library & then to delete the original events. Again it appears you can not delete events tied to a Project.
Does anyone know how to archive (move) Projects and/or events in iMovie 10.0.05 under Mavericks 10.9.5 to a second library on an external drive.
Thanks
Colroy

How do I share a compound clip between projects?...

Hello everyone,
I have created a 10 second intro/title graphic clip in Motion and published it to FCPX. I have added this generator sequence to a project's timeline in FCPX. I then added a lower third title set. I have edited my text (font, style, etc) of my lower third text to where I want it. I then created a compound clip of the two parts (title generator and the lower third text element).
Now that it is dialed in, I need to be able to use it as a template for a series of videos I am working on. I can't seem to find a way to save it and make it availible to drop into other project sequences. I have tried to make a favourite out of the clip, I tried to copy and paste between projects (and into a new event)... nothing works fo rme.
What am I missing?
Any help is appreciated, thank you,
Shea A.J. Comfort

Hi Andy
Thank you for the advice.
I tried your method but there definitely seems to be a fault or glitch in my software. If I highlight a number of connected clips and audio tracks the program will not copy and paste them into the newly created compound clip in my event library.
I therefore decided to do it the slow ay and copy each individual item. This worked fine until I came to the final audio track. No matter how many times I copy this track Final Cut refuses to do this. It always comes up with the previous item I copied. I have retried this and it will copy all the items except one. As you would expect I have done a fair amount of work on this track in the form of equyalisation, a comnpression filter and numerous keyframes on the level to come out with a mix that I am happy with. I cannot however move it from the original project.
I find this totally unacceptable and consider the software to be unfit for purpose as a result. Unfortunately the apple terms and conditions state that all purchases are final and I have no recourse upon them for the fact that it does not work.
I cannot see how an update will fix a problem with my software that is not universal to all users. I believe that I can reinstall it without being charged again but am hesitant to do this for fear of losing the large amount of work that I have put into the project.
My only hope now is to ring the premium rate number for customer support in the unlikely hope that it can be solved this way.
Not Happy
Simon

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to play movie clips for a certain amount of time only

Hello everyone, I think I have a relatively basic question here but I can't figure it out. I have a movie clip loaded using action script 3 at the start of my animation, I want ito to end at the 120th frame. But I can't use the stop(); command because it will also stop the rest of my animations from the 121st frame onwards. So my problem is, how can I stop the movie clip without stopping the rest of my animations?
Thank you in advance!

I don't think I have codes that load the swf, but I've sent you the code that I would like to stop. Thanks!

How do I move an imovie project on a macbook pro to an imac

I have an imovie project on a macbook pro. I can't seem to export the movie. I keep getting processing error -108. I want to shift my project from my Macbook pro to my Imac. How do I do this and import into imovie?

Hi
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
BTW:
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

How do I move clips between projects?

Similar Messages

Maybe you are looking for