How do I move my Time Capsule from Ethernet back to Wireless?

Problem: i need to back to wireless use of TC from temporary use of TC via Ethernet.
Background:
I have had my Time Capsule set up for years as my Airport / wireless hub and backup. No problem.
Until I went to restore iPhone from Time Machine and, separate problem, need to connect my MacBook Pro to my Time Machine by Ethernet cable in order to get a direct connection (iPhoto was not restoring from Time Machine wireless, kept hitting I/O errors. Worked fine when I did it with direct Ethernet connection, another story).
NOW, I can not see to figure out how to revert back to regular, wireless, Airport hub connection (vs. Eternet direct)
Other information:
1. When I open Airport Utility it does not "see" my Time Capsule at all.
2. Also, it does not let me "see" manual setup, or anything else, except for "rescan" which turns up without any results.
3. The amber light keeps flashing.
4. Previously I turned TC off, then on by unplugging and plugging. Flashing amber light. Same problem.
5. All cables are plugged in tight, from ISP/FIOS cable, to TC via Ethernet, and, hopefully temporarily!, from TC to my MacBook Pro via Ethernet cable (which is what I want to undo, and go back to wireless)
6. I am able to access Internet staying with cable running in configuration in previous point.
Thanks in adv

You could have the TC join your existing wireless network as a client, or you can can connect the Time Capsule's WAN port to the modem/router.
In both cases the TC's "connection sharing" should be set to "Off (Bridge Mode)".
If the TC "joins" the wireless network you can only back up over your wireless connection, so the second option is preferable.

Similar Messages

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • How to browse files in time capsule from outstate?

    how to browse files in time capsule from outstate?

    I presume by outstate you mean remote access ie from internet in a different location??
    If so google for remote access time capsule.
    It is simple if you have TC setup as the main router and a static public IP.
    Just go to finder, go, go to server and type in AFP://IPofTC
    The TC has to be checked to allow wan access and use a decent password as the security for AFP is poor.

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • Clean the time capsule from all back ups

    How to clean up the time capsule to 0,i want to give it to a friend clean and reset.With none of my back ups and new resettings for him.

    Here is how to do what you want to do:
    Open AirPort Utility - click Manual Setup
    Click the Disks icon, then click the Disks tab, then click Erase.
    I would recommend that you choose the "Zero Out" option. This will replace everything on the drive with a "O" (Zero). This will probably take 4-6 hours depending on how much data you have on the disk. The 7 pass option will Zero Out 7 times and take a few days. The 35 pass option will take weeks.
    Once the drive is erased, open AirPort Utility again and click Manual Setup
    Click the Base Station menu at the uppermost top of the computer screen in the same toolbar as the Apple icon. Select "Restore Default Settings". This will only take about 30 seconds. When the Time Capsule blinks amber slowly, you are done.

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • HT5096 How can I move my Time Capsule Backup to an External Hard Drive?

    Hi
    I have run out of space on my Time Capsule so have decided to change my backup drive to an external hard drive of 4TB. I moved the Sparse Disk Image Bundle from the Time Capsule to the new drive and then changed Time Machine preferences to use the new drive as my Time Machine location. Backups work fine but I am still getting Disk Full messages as it seems that the backups are limited to the original 494Gb disk image size.
    When I double click on the sparsebundle it mounts the Time Machine Backups Disk Image revealing the Backups.backudb folder but if try to drag that to the External Hard Drive I get the error message "The volume has the wrong case sensitivity for a backup."
    Any clues how I get this sorted
    Cheers
    Steve

    See Pondini's TM FAQs, for starters.

  • How do I stop a time capsule wanting to update its firmware?

    Ive updated my firmware twice and both times I've had to revert back to version 7.5.1 (the version the capsule came fitted with) as the updates have either slowed down its wireless speed or it constantly disconnected and reconnected giving me an annoying warning every couple of minutes to tell me so.  It's now flashing orange and 'reporting problems' wanting to update its firmware.  How do I prevent the time capsule from wanting to update to a version of the software that doesn't work?

    This is one of those hard to find menus.. and it will still not prevent it occasionally requesting updates.. and you might have to reboot it occasionally.
    Open airport utility and open the manual setup. In the spotlight box (is that what it is called), in the top right corner which has find a setting.. type updates.
    A menu called options pops up.. and you can set it to forget. Check for firmware updates, uncheck.. !!
    Update the TC.

  • How do I set up my new Time Capsule just to back up not as a wireless?

    Can anyone tell me how to use my new Time Capsule just for back up not as a wireless router?
    I have an ATT Uverse for my wireless service and have not been able to get the two to work together.
    I just want to plug my Time capsule in and connect it to my MacBook Pro with an ethernet an click backup.
    So far my computer doesn't reconnect the Time Capsule.
    Thank you for your help

    You will need to configure the Time Capsule (TC) to join the wireless network provided by the ATT Uverse router, as follows:
    Either connect to the TC's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the TC, and then, using the AirPort Utility, change this setting:
    AirPort Utility > Select the TC > Manual Setup > AirPort > Wireless tab > Wireless Mode: Join a wireless network
    Wireless tab > Wireless Network Name: <select the ATT Uverse network>
    This configuration will allow your Mac to connect by wireless to the ATT Uverse router and perform Time Machine backups wirelessly.
    If you want to only do this backups by wire, then you will need to connect the TC directly to the ATT Uverse router by Ethernet, and then, reconfigure the TC as a bridge. You can then connect the Mac to the TC by Ethernet as well for backups.

  • How can I set my time capsule to back-up only once a day?

    How can I set my time capsule to only back-up once a day.  It appears to be backing up several times a day.  Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.

    tdenny2 wrote:
    Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.
    Then something is wrong.  Changing the schedule will only deal with the symptom (and give up one of the better features of Time Machine's usually quick and unobtrusive hourly backups).
    See if the size of the backups makes sense, considering what you've changed since the previous one.  If it seems much too large, that may be the problem.  See #D4 in Time Machine - Troubleshooting for some common culprits and ways to see just what's going on.
    If the sizes seem reasonable, see #D2 in the same link for things that can cause extra-slow backups.

  • I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

    I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

    you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
    plus, the wireless connection to TC is too slow for iMovie.
    purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
    you HAVE to follow advice given here:
    http://help.apple.com/imovie/#mov3ac6d42c

  • I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

    I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time... 
    Thanks for any help.

    I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
    This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
    The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
    How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
    There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
    If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
    Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
    Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
    Are you talking about files you are hosting on the TC?? Not Time Machine backups??
    Can you tell me exactly how you are accessing the TC.. please do a test..
    Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
    Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
    Do the same test from the same computer with wireless turned off running ethernet.
    Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
    I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
    eg
    Now do the test from the HP laptop and give me the results from that.
    Is the issue wireless only.. ??
    Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
    About Wireless Diagnostics

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • How can I access my Airport Time Capsule from a remote location?

    I have my 2 TB Airport Time Capsule connected to my home wireless network and I have heard it is possible to access my information stored on it from anywhere, but I have no clue how to do this.

    Frankly, this is not easy, and not for the faint of heart.  Having someone to help who has done this will save you a ton of time and headaches.
    Set up and use Back to My Mac - Apple Support
    Before you do anything though, Back to My Mac assumes that you have a simple modem......not a modem/router that is often provided by Internet Service Providers to their customers.  A modem/router.....also called a gateway.....will not allow Back to My Mac to work correctly, so if you do have a modem/router or gateway device, you will need to speak to your service provider to find out if they can provide you with a simple modem.
    A simple modem will look something like this:
    A modem/router or gateway will look something like this:
    Having said this, personally I use another method called Port Mapping to allow my Mac...or an iPhone or iPad connect back to the Time Capsule at home when I am traveling.  But, this is even more complicated than Back to My Mac, so BTMM would be the place to start for most users.
    If things look intimidating on first pass and you can locate a good tech to set things up for you, that would be money well spent.

  • How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and Power Book

    How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and MacBookPro

    It is generally better to leave the old backups and start again.. unless there is something you particularly need.
    But if you desperately want all the old backups you have to copy the sparse bundles.. this will take very long time as it must copy via the computer..
    http://pondini.org/TM/18.html
    Take particular note of the initial comments.. ie before you read how to do it.. don't do it.

Maybe you are looking for

  • Problem with Serial Number from MSi ATi HD4870 :/

    Hi all, I have problem with my HD4870. I lost the serial number (the small paper on back of card) from card. Have I any chance to get it back? I can take a photo and post it here some S/N and P/N from card, if it helpfull... I lose my warranty, if I

  • ReportCrash using CPU due to mdworker crashing

    I have seen this reported several times, with different resolutions over the years. I am posting this here as a new discussion to help anyone who has the same problem which seems to be a more recent version of the problem with Mountain Lion, and some

  • Firefox doesn't display some text on certain pages.

    I've noticed that on some pages, Firefox doesn't display certain text. I have the newest version of Firefox installed and my flash and java are updated. The text displays fine on Chrome and IE. Please see my example in the screenshots of the stevenso

  • How to map secondry elements with main if have same ids for both?

    I need to map secondry elements with its matching primary elements if they both have same id. How can this be achieved in xslt. If ids are not matching then not a single element of secondry sholud be shown. If ids matching, then other fields of secon

  • TWAIN Sane with Canon LiDE 50

    Hello! I'm trying to use a Canon LiDE 50 scanner under OS X Mavericks 10.9 with TWAIN Sane drivers. It worked well with Mountain Lion OS X 10.8 and now with the newly complied Sane drivers for Mavericks, Sane doesn't recognize the scanner anymore :-(