How do I move photos between projects if the photo is published in Flickr/Facebook

I have a TOSORT project in my library that I use to triage photos as they come in. I go through and work on the photos and then move them to an appropriate library. I made the mistake of accidentally publishing some photos to Flickr/Facebook from this folder and now I can't seem to move them out. Any tips/tricks I am missing?

The answer is that you cannot do a complete Move so long as the FB/Flickr album exists. See:
https://discussions.apple.com/message/15137918#15137918
Ernie

Similar Messages

How do I move clips between projects?

Should be a simple enough task but, how do I move clips made in one project to another project?

clip media is not conained within a project per se, rather it is referenced by a project, so as long as the media is on the hard disc then it can be referenced by as many projects as you'd like.
you can open multiple projects simultaneously ... then to move clips between the projects you can just drag and drop between the various projects' bins, or copy and paste if you prefer.

How do i move pictures from picasa to the photo stream in icloud

how do i move pictures from picasa in windows 7 to photo stream in icloud. thanks

I am over 16 years old so I don't use Facebook.
But this is what I found out.
Click on a photo in Facebook. Just below the photo on the left click Download, save the image to your Desktop. Now drag the image to your iPhoto library.

Why can't I cut and paste photos between project?

I recently made the transition from iPhoto to Aperture. One of the weird things is that I can't cut and paste photos between projects. In iPhoto this is an easy way to organize your projects if some photos are in the wrong place.
You also can't split projects, in iPhoto you can do this easily. Say, if two day's photos ending being in the same project, in iPhoto there's a button that you split them in the middle. Is there something like this in Aperture?

Copy and Paste:
In iPhoto "copy and paste" was possible, because it was not possible in the early versions, to see both projects at the same time, the one you are moving from, and the one you are moving to.
In Aperture you simply drag from the source project to the destination project to move image versions around. Also, it is easy to see more than one project in the Browser at the same time, see: Aperture 3 User Manual: Working with Two or More Browsers Open
To drag to another project, select the images in the project, then drag to the other project in the source list, for example:
To split a project, select the images you want to have in the split part, then create a new project from these images: Enable the check mark "Move selected items to new project". This will split the original project.
Regards
Léonie

I am using photos . I add a camera and make my photos slide in. How do I add a second behavior to the photo to make it slide out. I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

I am using photos in Motion 5. I add a camera and make my photo slide in. How do i add a second behavior to the photo to make it slide out? I want the photo to hold for a few seconds in between sliding in and sliding out. When I am trying to do this I am not getting the photo to hold, i am making one continuous motion which I do not want.
Thanks

Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

How can I move someone's hair from one photo to another and place it on another person?

How can I move someone's hair from one photo to another and place it on another person?

Duplicate post.

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

How do I share photos on I-photo between users on the same computer?

how do I share photos on I-photo between users on the same computer?

See Terence Devlin's post here > https://discussions.apple.com/thread/3250415?start=0&tstart=0

How can I move one years worth of Raw photo files to a different hard drive and perserve the edits

How can I move one years worth of raw photo files to a different hard drive (to manage space) and preserve the develope module edits and still see them in the Library module?

The easiest situation, is where this year's worth of images is grouped physically inside one parent folder (something many people build in from the start, in any case).
If there is a parent folder on disk, but you are not currently seeing that inside LR's Folders panel, you can make this visible to LR by right-clicking on one of the folders which live immediately inside that, and selecting "show parent folder". This gives you a single "handle" by which to manipulate the whole grouping.
Then it is just a matter of moving this parent folder. It's usually as simple as dragging it from one place to another inside LR's Folders panel, however this is a little more difficult when it's a question of another drive which does not yet appear there.
So an alternative method will likely prove more straightforward: physically move the whole year folder into the other drive using your operating system's Explorer/Finder. The folder (and subfolders, and all the contained images) will change with ? icons inside LR, and it all goes "offline". This is because LR's records of where everything is, are known not to currently work (the former location is now not available). But all the edits, thumbnails, keywords, collections etc are still in place because these things are still remembered in the Catalog - and the fullsize previews are still cached also.
Then right-click on the parent folder in LR's Folders (the top folder which shows a "?") and select Update Folder Location. Then browse to the other disk and identify where this folder is now to be found. LR updates all its records and the whole grouping carries on just as before, only using a new storage location for each image concerned.

How do I move pics from camera roll to photo stream

How do I move pics from camera roll to photo stream?
Also, iTunes on MacBook says phone is locked. It is not.

Not really....I just took pics on my ipone yesterday amd they are stored in camera roll...not photostream. All my software is up to date. Unless I am not seeing something here...this is an annoying bug.

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

How do I add an iMovie project to the iPad?

How do I add an iMovie project to the iPad? I have added the project to the pane in iTunes but the iPad has no way to import. I am using iOS 8.0.2. Also, when I open iMovie in the iPad, I see one project and video available but it is not shown in iTunes. What the heck is going on?
Thanks.

First thing I'd try is dropping the Quality level down to Medium or maybe half-way between High and Medium.
Matt

How does Media Manager handle Motion Projects within the Sequence being cop

How does Media Manager handle Motion Projects within the Sequence being copied?
I've highlighted my sequence, opened Media Manager, and copied it to another drive. When I open up the sequence in it's new project, the rendered Motion Project plays within my sequence but it won't let me go back into this Motion Project to make changes. I tried starting over. This time I highlighted the actual motion sequence and clip that is created within FCP after sending something to Motion and copied those to the new drive. When I went into the newly created 'media' folder and double clicked on the motion project it launched. It looked liked it was going to play but while my crops moves and borders were there, the filmed material is shown as a freeze frame for the duration of the motion project.
I did this with and without 'including master clips within selection'. Any advice would be appreciated. Thanks.

Is there anyone who knows the answer to this? Thanks.

How do I move photos between projects if the photo is published in Flickr/Facebook

Similar Messages

Maybe you are looking for