How do i mute all sounds except alarm

I want to mute all sounds and alerts except for my alarm so I don't get bothered by sounds all night long. How do I do that?

To switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone. When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does,however, play alarms set using Clock.

Similar Messages

How to easily mute all sounds but still use phone?

For the life of me, why doesn't the volume control on the side of the iPhone go down all the way to mute like the iPad does. There is no one convenient place to go to turn off sounds while in a meeting but yet still use the phone without turning it off. Turning it off is not an option for a lot of people.

To take advantage of the All Features in iOS 5 See Here
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Mute all sound out of FCP

How do I mute all sound coming out of FCP. Not on an individual sequence or clip. All the time. Is there an 'Mute All' button or option anywhere?
Thanks

Back in the day...
I had a mini headphone jack adapter that wasn't hooked to any headphones. I'd just pop that in the audio jack on the front of my computer and leave it there. That was back when you couldn't turn the startup sound off.
Maybe that would work for you too. You know... those iPod ear buds only seem to work for so long before they crud out... I've got a mess of them that I never use anymore... I'd just cut the end off one of those... hmmm... sounds like an eBay sale for sure!!!
CaptM

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds

How do I enable all sound files wav,MP3 on windows 7 64-bit change system sounds it will only give me the option to choose wav?

Windows 7 uses .wav (wave) files for the sound events. The default folder that Windows 7 uses to store the sound files in is located at C:\Windows\Media.
You cannot use a MP3 file but there are lots of (WAV to MP3 converters) available on internet which can help you to convert MP3 to wav serving your purpose of changing system sound.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

How do I mute the sound from the video camera when burning a DVD

Hi there. I'm a new user of Elements 8. I have compiled some clips and added a soundtrack to the movie, When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background. How do I burn the DVD without the background sound from the video camera? On the DVD I only want to hear the soundtrack I added.
Thank you,
Doug

Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt

Lost all sounds except ringtone after recent upgrade

No sound except ringtone after recent upgrade followed by the upgrade fix. Since the ringtone was only affected I didn't notice immediately! If I plug in my headphones everything works. Unable to use volume buttons on side unless headphones are plugged in, the volume symbol with white dots doesn't even appear anymore. The volume control in itunes music only works when plugged into headphones otherwise it can't be adjusted. Worked with apple support tried everything include a restore to new still no go! It appears that a few people are having the same problem and seems weird that it happened after last upgrade!

If you are unable to adjust the volume without headphones even after restoring, then the iPhone thinks it's plugged into a dock or cable. This is the behavor that will happen if you plug your iPhone in to the car or iHome dock to play you music and sounds, but a docked connection will never play ringtones through the dock connection and headphones override that dock connection which is why your headphones work.
How does the phone think its connected to a dock? Well, this can happen if the charging port gets wet at some point or if some trauma happens in there like pushing the cable in when it doesnt fit, etc.
So it happens even after restoring what do I do? Service your iPhone. https://selfsolve.apple.com

Shut off all sounds except one distinctive ring?

Can I shut off all sounds and leave on just one distinctive ring?
When I go to sleep I'd like to leave my phone near me. I don't want to get any sounds from it, except the ring from the nursing home where my mother lives. Everything else can wait until morning. Can I do this on an Iphone 6 or 5?
Upon awakening, I'll reset to get all the sounds.

ozzikk wrote:
I want to be able with one of the phones to make calls, but not to hear a ringtone when somebody calls (I want all incoming calls to be heard only in the other phone).
On one of my operator's forum I've received help. On adapter, in Line section (the one where I don't wanna hear ringtone when my numeber is called) I set DND Settings:Yes (which stands for Do Not Disturb). This makes my phone completely silent and I can make calls (the line must be registered, in the other case Make Calls Without Registration must be On).
I'm still curious what's going on with Distinctive Ring Patterns since my phone has only melodies as ringtones, though (is this function useful in this case?)
Anyway, thanks for your intentions.
cheers

My iPhone is playing all sounds except for music??

I was listening to music and all sounds were just fine. I turned it off for about 20 minutes and when I came back to it the music was showing that it was playing but the sound wasnt coming on. All other sounds work. When the music is playing i cant use the volume buttons on the side of the phone but when the music is off I can, so I know those arent broken. Ive looked through all settings and havent found anything to fix this. After a few minutes the keyboard clicks stopped giving sound as well. Help!

This may sound crazy but just follow these steps:
1. Clean the headphone input out with a cotton ear bud or a pipe cleaner. Gently turn the ear bud and slowly pull it out. This will get rid of any dust particles that lay inside.
2. More than likely it still won't be fixed but check to see anyway.
3. If your problem still exists, (and here's the "crazy" part) cover the headphone input with your mouth and suck with a lot of force.
It is possible that it may take a few times but try it again and it should work :)

How do you silence all alerts except phone and alarm?

I want to silence all alerts (texts, emails, etc) except for phone calls and the alarm like I could with my blackberry.
My new iPhone 5c is a huge upgrade from the BB other than the lack of Sound Profiles.
I've read a post about plugging the headphones in so that the other alerts play through them, but the phone and alarm still sound out, but this does not appeal to me as I don't typically use earbuds. Matter of fact, the ones that came with the phone are still in the box.
If this is the only option, I think it's a bit chintzy, but I can go with it.
Thank you for your comments.

One option that I can think of is enabling Do Not Disturb. It will allow alarms and gives you different options for allowing phone calls. You can have it enabled "always" or "only while iPhone is locked".

Apple support just did an iOS diagnostic quick test on my ipad3 .I have lost all sound except through my head phones since downloading IOS7 today. now what? Do I just make a big sign on my truck saying beware ISO7 killed my ipad?

apple diagnostic quick test on my ipad..a waste of my time?now what will they do for me.I lost my sound on my ipad3 except with earphones after loading IOS7 today.Was this apple support just some sick joke?

You are kind van.22
Yes I started simple.butons and settings all function.jack is clear...I know because the head phone signal comes on when it should . restart and reboot many times and did a reset all settings.Went to my buddies in the IPF and they are scratching their heads. went to apple support and they did a quick test IOS diagnostic .And that's how I got to here at this sight.
what I didn't mention was that after loading IOS7 my ipad on the glass by the power supply it was warm to the touch.
all those hours reading and fiddling can make you loopy.
I'm off to an apple store.Have to catch a ferry.
oh by the way rebooting and restarting is good for your ipad it helps it organize itself.designed to do that.
Thanks again vancouver 22

How can i delete all history, except open windows and tabs?

hi, i can not find any way to delete all my firefox history, except open windows and tabs.
i could not find any solution about in the web. i did try almost all settings in privacy settings, nothing works. any ideas how to do that, or maybe suggestions for add ons?

Hello,
Have you looked in:
* History (or [[Image: New Fx Menu]] > History) > Clear Recent History...
You can choose what you want cleared and the time frame.

How do I change default sound for alarm on iphone 5c?

I don't like the default sound for my alarm on my iPhone 5c. How do I go change the default so I won't have to continually change it?

I know it's important to customize your device naivebelle. I'm sorry to hear that you are not pleased with the alarm tone on your Razr M. If you have already checked the main volume settings, I have attached a link for notification sounds. http://vz.to/1jEbaq4 I'm sorry we don't have specific information on changing the alarm sound specifically. This is likely just a slight change within the new OS itself.
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

6720 Classic - How to use your own sound for Alarm...

Does anyone know how to set the alarmTone - to use a imported self made tone. I know it works because it worked before I send it to repair.
The file is a .amr file.

go to clock select options then settings
scroll down to clock alarm tone the list of your library comes up and look here for your tone
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

I've lost all sound except for Netflix. Checked my settings and nothing seems out of order.

Hi all. I've lost the sound on my iPad.

1. Double-click the Home button and swipe the Task Bar (at bottom) to the right. Check volume and mute settings.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

How to hide the all rows except the result row in a report?

Hi Experts,
We have a report in which the user is interested to see only the result rows and I need to HIDE the characteristics in the rows. I was successfull in doing the same for Key figures in columns using "Calculate single value as suppress result". But I am not finding a way out to hide the characteristics in the rows.
If I move the characteristics in rows to Free characteristics, the result row is not getting dispalyed. Also, the characteristics are used dynamically by the formulae in columns and hence i cant remove these characteristics from the query. . The user wants the query to contain only one characteristic in the row and the result row for the key figures in columns. The report currently displays Invoice level data for each customer and this needs to be eliminated and it should display the summarised data for every customer. Please suggest how this can be accomplished
Regards,
Kavitha

Moving the char to free char will show the equivalent of result.
Your issue likely is that this breaks the calculations since you do want the calculations done at detail level.
To achieve this, move your char to free char (say it is 0CUSTOMER).
For the CKF/Formula, go to aggregation tab, set the exception aggregation as Total (or whatever it was in standard behavior) and specify reference characteristic (in this case 0CUSTOMER), also check the 'Before aggregation' if you have that checkbox there.
This will ensure the calculation is done at detail level even though the char is not included in the rows.
If you have multiple chars to be moved to free char but included in detailed calculation, you will need to build cascading CKFs (CKF1 with ref char1, CKF2 eq to CKF1 with exception aggr on ref char2...and so on).
Added:
I understand you do want 0CUSTOMER in there, but something else (let us say 0DOCNO) removed. Use 0DOCNO in place of 0CUSTOMER in the case described above.
Edited by: Ajay Das on Aug 5, 2009 8:57 AM

How do i mute all sounds except alarm

Similar Messages

Maybe you are looking for