How do I mute just a word or two, in a clip?

I know there must be a simple way to do that. Just mute a few frames of audio, leave the video alone.
Thank you.

you will need to split the clip. Since you want just a few frames then you must use the precision editor. i have never tried to mute such as small amount. I usually just make a cut.

Similar Messages

  • Any advise on how I can turn just one word in a sentence upside down, as opposed to all flipped

    Could someone advise on how I can turn just one word in a sentence upside down, as opposed to all flipped. Im trying to make one word stand out whilst designing in a text sentence window.
    Thanks In advance

    It’s best to type your sentence and then click on the hand tool to deselect the Type tool
    Click the type tool again and type the word you wish to rotate (it will be on a separate layer.
    Select the layer with the full sentence and add a layer mask.
    Choose the brush and paint with black to mask the word in the sentence.
    Select the layer above with the single word and use the move tool to rotate and position it. Then save.

  • If I accidently open a 2nd session of firefox resulting in two open windows when I close one window they both close and I lose my tab groups. How can I close just one of the two windows?

    I have 3 profiles, one of which I typically use. I have firefox prompt for the profile when it loads. I recently renamed the profiles (earlier this week). So... the profiles do not exactly match the folder names for the profiles.

    I don't understand what happened above, but ericn1, wasn't your problem that you tried to close one browser window using the red X, and ALL of them closed? How did any of the above help you solve your problem? jscher2000 gave you alternate methods of closing windows but said that closing a window with the red X "should" work. It doesn't work, because it is closing ALL your windows, not just the one you are clicking on. I am now having the same problem. with Firefox.
    Understand I do not have the problem with any other program. In other words, I can open multiple windows in Paint Shop Pro, IE, Notepad, etc. and close one with the red X and all others remain open. It ONLY happens when using the Firefox browser.
    The red X should close only the window that you are in when you click on it.
    NOW, before someone suggests tabs, I don't like them and don't use them. My choice. Before someone says my browser is out-of-date, (3.6.13) I am using it because it was the last version that worked reliably on my computers, both at home (Windows 7 Professional) and my office (Windows XP Professional).
    When I updated to the last Firefox browser, both computers started seizing up (nothing worked and had to reboot using power button) Removing that version of Firefox and going back to this version solved that problem. Fact remains, version has little to do with this problem. I've seen other posts around the net about this with different (newer) versions of Firefox.
    So . . . does anyone have a solution to this that doesn't involve using keystrokes or hot keys to close windows instead of the red X that should work properly?

  • HT1311 I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

    I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

    http://support.apple.com/kb/HE36
    Regards.

  • TS1135 how can you correct just a few words on the text in the flap of a iPhoto book? do you have to rewrite it all?

    How can you correct just a few words in the text on the flap of iphoto book?

    Select it and change it - exactly like you edit any text on yoru Mac
    LN

  • Just asking how to type Arabic letters in word, in more specific how to type letter or pargraph in Arabic language in word

    Just asking how to type Arabic letters in word, in more specific how to type letter or pargraph in Arabic language in microsoft winword.
    Thanks

    Regarding your screenshot of Word, I cannot duplicate it, I only get the expected disconnected Arabic.  I am sure that nobody will be able to duplicate it unless perhaps they have the font Arial Body CS, which is not part of MS Office for Mac or OS X.  So for your contribution here to be helpful to anyone, you will have to provide a link for downloading that font.

  • How do I port my Windows Word, Excel, and Powerpoint files to the MAC?  What software is needed on the MAC to use them?  Thanks.

    How do I port my Windows Word, Excel, and Powerpoint files to the MAC?  What software is needed on the MAC to use them?  Thanks.

    You can certainly use iWork, though I hesitate to recommend it to a seasoned Windows user simply because it would add another level of the unfamiliar with which you would have to gain familiarity. The iWork applications are certainly very competent and in most respects both easy to use and surprisingly powerful. They are not 100% compatible however, though that typically manifests itself in document formatting issues rather than anything more significant.
    I have never attempted to import emails from a Windows system into MacOS - other than in Outlook connected to an Exchange server, thus not really an issue at all. I doubt that the Mail app in MacOS can import directly, but of course you could always set the account(s) up on the Mac and then forward emails you want to keep from the PC. Not elegant, but it works. Virtually any Windows document or file, whichever application created it, can be opened or converted for use on a Mac, and using both systems on my desk each day I rarely see any issues switching stuff from one machine to the other. You may stumble over one or two issues, but likely not significant.
    In switching platforms there will be some inevitable issues, not so much with being able to import your stuff because there's usually a workaround or a utility that can help, but just with getting familiar with the platform and the differences between Windows and MacOS that can obscure their similarities. From time to time the support community here hears from a user who has found the migration very problematic and regrets it, but for the most part the phrase 'I should have done this years ago...' is rather more prevalent!

  • If I put an item in clippings that I reduced from a larger article, how do I print just the clippings excerpt?

    If I put an item in clippings that I reduced from a larger article, how do I print just the seperate clippings excerpt?

    Hi Mark,
    I think one thing you may missing is an understanding of the purpose and operation of the mail merge process.
    Mail merge is used to 'personalize' a preset document using information from the records of a database. Any content that will vary from copy to copy of the document must be imported from the database. Every item that is specific to the copy being sent to a specific individual must be included in the row of the table containing the record for that individual.
    For invoices, unless you are sending an invoice for the same item(s) at the same price(s), you'll need to either include the items and prices in the database and merge them into the invoices, or use the merge document to create a document containing an empty invoice for each customer, containing only the customer identification information, and the company information (taken from the card marked "My Card" or "Me"), then fill in each invoice manually.
    The Pages '09 template named "Invoice" might word with the second approach, depending what type of document the merge to file option produces. If it's a Pages document, the table, containing the invoice data, will likely be useable; if it's a pdf document, the table may be editable (or not), but will lose its ability to calculate the tax amounts and totals.
    To produce an individual invoice from this template:
    Open the template.
    Drag the recipient's card from Contacts/Address Book and drop it on one of the fields in the first block of address text.
    Enter the project information in the second block of text.
    Check the Company block in the left margin for correctness.
    Enter the Invoice items and quantities in the table.
    Print (or Print to PDF) the document and mail it.
    Regards,
    Barry

  • How can I change a Microsoft Word document file into a picture file?

    How can I change a Microsoft Word document file into a picture or jpeg file? I am wanting to make the image I created my background on my macbook pro.

    After I had the document image the way I wanted it, I saved it as a web page and went from there. Below are the steps starting after I did the "save as" option in Word:
    1) Select "Save As Web Page". I changed the location from documents to pictures when the window came up to save it as a web page.
    2) Go to "Finder" on you main screen, or if it's on your main toolbar at the bottom.
    3) Click on the "Pictures" tab and find the file you just re-saved as a web page. (I included "web page" or something similar in the new title so I could easily find the correct file I was looking for)
    4) Open the correct file and then "right click" on the actual image. (Use 2 fingers to do so on a Mac)
    5) Select 'Use Image As Desktop Picture", and voilà! The personally created image, or whatever it is that you wanted, is now your background.
    **One problem I encountered while doing this is that the image would show up like it was right-aligned in relation to the whole screen. The only way I could figure how to fix this was to go back to the very original document in Word, (the one before it was saved as a web page), and move everything over to the left.
    I hope this helps someone else who was as frustrated as I was with something that I thought would have been very simple to do! If you have any tips or suggestions of your own, please feel free to share. : )

  • Underlining just the word(s) in selected text string

    How do I get InDesign 2 or 3 to underline just the individual words selected and NOT the spaces?
    We work with legal documents and we have to style them exactly the way the judge has indicated (some underline everything, some just the words). This can become a time consuming endeavor when there are multi-worded court cases cited and sometimes over one hundred cites within one document.
    This was quick and easy under Quark, either from the control palette (click of a button) or the keyboard shortcut (Apple + shift + W). This shortcut closes the document in InDesign (even though the keyboard shortcut for that is supposed to be just Apple + W, both do the same thing). I could reassign the shortcut if I could find the action to link it too (but can't find the action even mentioned in the Help or the forums).
    Have checked under the Underline Options dialog, but there isn't anything there that would solve this problem.
    If there isn't a direct way to do it in InDesign, is there some sort of plug-in available that anyone knows about?
    Thanks in advance.
    LRP2

    I don't believe there's a direct way to do it in Indesign. There are some shortcuts that help.
    In CS4 you can set up a GREP search to find Words, set Change Format to change "basic character format" to include underline, then do a replace all in selection. You can set up keyboard shortcuts for some of this, but a script would be even more convenient.
    Unfortunately, with the normal "Find" function, the "character" wildcard also seems to find spaces, and there isn't a "whole word" wildcard, so this won't work in CS2 or CS3.
    The best I can think of at the moment is: Underline the whole text. Set Find What to find spaces (^w), leave Change To blank but in the Change Format box, turn off underline on Basic Character Formatting. Close the dialog box. Then, placing the cursor at the beginning, press shift-F3 (the standard shortcut for "Replace with Change To text and find next") for each space in the sentence. You can zip through the section fairly quickly.
    This is really a job for scripting -- the script should change all characters in the selection to underline, then change all white space characters in the selection back to non-underline. Scripts can be assigned a keyboard shortcut for ultimate convenience.
    Rodney

  • When i click a button the webpage doesn't load... and sometimes the whole pages goes white and just shows words on the far left...

    idk if it is java or what, but every time i go to certain websites, like youtube.com they go blank and just show words, no images or nothing.. however i updated something and youtube works fine.. but now a website called roblox.com every time i hit the play button on a game, (it should load the game into a new window) doesn't do nothing when i click the icon.. to load it... can anyone help me with this problem?
    i have a windows 7 quad-core latest version of Firefox, so i have no idea, i think when i updated something it messed up the java source code.. or my Firefox got messed up... plz help?

    Hello,
    To protect against potential Java vulnerabilities, Firefox now asks you to activate Java by default, for each website you visit that uses Java. When you see an "Activate Java" message box, simply click it to load the Java content normally.
    [[Image:Fx24-JavaActivate]]
    If there is no visible area to activate Java content in the page, click the plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
    [[Image:Fx24-JavaAllowNow]]
    The next time you visit the site or any other that uses Java you will see this message again. If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
    For more information about using Java in Firefox, see the articles [[How to allow Java on trusted sites]] and [[Use the Java plugin to view interactive content on websites]].
    '''Important:''' After activating Java, you may see a security prompt, asking you to confirm that you want to run Java, or you may see an "Application Blocked" message, depending on the website and your security settings in the [http://www.java.com/en/download/help/jcp_security.xml#control%20panel Java Control Panel]. These messages come from Java itself, not from Firefox.
    For help with Java security prompts and "Application Blocked" messages, see the Java Help pages [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?] and [http://www.java.com/en/download/help/java_blocked.xml Why are Java applications blocked by your security settings with the latest Java?]
    Does this solve your problem? Let us know.

  • How can i open microsoft office word documents on my ipad 4 and edit it.

    How can i open microsoft office word documents on my ipad 4 and edit it. How to transfer my scaned documents on it

    There are a number of apps that are compatible with Office documents. Apple makes iOS versions of their own iWork apps (Pages, Keynote, Numbers) that are available free if you purchase a new iOS device and that can be purchased separately for older devices. There are also 3rd party combined suites that cost less than the separate Apple apps. Ones often recommended include Documents 2 Go,  Quickoffice and Office2 HD.
    If you can accept needing a network connection whenever you want to use the apps and have an Office 365 subscription, Microsoft has just released their Office Mobile app, though it has significant limitations. Or a server-based solution such as CloudOn might be an option for you.
    Regards.

  • How can i view a downloaded word document in pages?

    how can i view a downloaded word document in pages?   i tried to download a file, which worked, but i can't view it since i don't have word office

    Not sure what you are saying but Pages just opens Word documents, drag the Word document onto Pages' icon.
    Or open the Word document from the Open dialog.
    If you are talking about testing a Word document after you have exported it from Pages then you will need of course to have Word to open it but there are free clones of Word as well such as LibreOffice, Openoffice and Neoffice that will do that as well.
    Peter

  • Need Advice on How To / Recommended App. for Custom "Word of the Day" Screensaver

    I really like the “Word of the Day” screensaver that comes with OS X 10.8 Mountain Lion.  I would like to either 1.) customize this screensaver with my own dictionary OR 2.) identify an app that I could purchase / download which would allow me to create my own custom “Word of the Day” screensaver. 
    Does anyone have advice on how I can create a custom “Word of the Day” screensaver using my own dictionary?
    Any advise would be greatly appreciated!

    Thank you!
    If you have time for just a couple more questions.  The ultimate goal is have my new flash files in a version (as3) so they can be used as android, html5 and iOs products.
    So would the steps be these?
    Install cs6
    Open SWF files that were created in as2
    (I am assuming by doing this, all the assets will end up in the library which is currently not happening when I import the swf files into Flash CC)
    So now I have the old swf files open in a version of flash that works in as2.
    I understand that as2 is not fully convertible to as3.  But assuming I want to use the assets (graphics and audio) to recreate the animations in as3 can I then save the as2 file as as3 so it would then work with AIR?
    Thanks again?

  • How do i mute an audio track without deleting it.

    how do i mute an audio track without deleting it?

    There have been a few recent posts, where Audio Mixer settings are not "held," in PrE 11. Those cited problems seem to be Project-specific, in that Audio Mixer works, as expected, in a new Project - just not the one, causing issues.
    I do not know if there is a glitch/Bug in Audio Mixer, or if the users are doing something that is "disconnecting" Audio Mixer in some way.
    As a test, create a New Project, Import a Video file with Audio (Muxed Video Stream and Audio Stream), and test Audio Mixer, and the Mute function there. How does Audio Mixer work in that Project? Does the Muting of the Audio "stick?"
    Second test: in your existing Project, Select all the Clips on that Audio Track #1, and drag them to Audio Track #2, or another, empty Audio Track, and test the Mute for that new Track, in Audio Mixer. How does that work for you? Does the Mute stick?
    Good luck,
    Hunt

Maybe you are looking for