How do I mute the sound from the video camera when burning a DVD
Hi there. I'm a new user of Elements 8. I have compiled some clips and added a soundtrack to the movie, When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background. How do I burn the DVD without the background sound from the video camera? On the DVD I only want to hear the soundtrack I added.
Thank you,
Doug
Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt
Similar Messages
-
How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps -
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc
-
How do I stop the sound from a video or email when I want I click out of the video. Presently, the sound continues and I have to escape out to home screen to stop it.
Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps. -
I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.
-
I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
RogerMe again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer -
i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco
You may get a better response in this community:
https://discussions.apple.com/community/app_store/garageband_for_ios -
When I close a youtube video or some other video and even after closing the tab the sound from the video continue to be played. As a matter of fact I have even closed Firefox and re-started Firefox and it plays again. I even went and turned off the computer and re-started the computer and then Firexox and the video sound was still there playing. WHY is this happening???.
Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video. -
When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?
http://support.apple.com/kb/TS1630
-
How do I import a home movie into I movies from a video camera when it says format not valid
How do you import a home movie straight from your video camera to i movies when it advises format not recognised.
iMovie
http://www.apple.com/support/imovie
http://www.apple.com/support/ilife -
How do I remove the sound from a video project and replace with music...?
Hi there to all...I would like to know how you remove the original sound from a movie (using iMovie) so you dont hear it through any music added...?
Select the video clip and open the clip inspector to the video tab. You can set the volume slider to zero.
You can apply this to a bunch of clips at once.
Do the first one.
Then Edit/Copy.
Then Select the clips to apply it to by select while holding command key. (or EDIT/SELECT ALL to get all clips)
Then EDIT/PASTE ADJUSTMENTS/AUDIO ADJUSTMENTS -
How do you remove the sound from the video's in imovie 08
hello
just wandering how do you remove the original imported movie sound in imovie 08 ?
so that i can play my own sound track, i know it could be done in 06 ,but i just can find it in 08
any help would be great
thanks
yaddle2goJust wondering ... can you then add other background music ... and not use the audio recorded from the camera at all?
Yes. You can add your own audio either to the background of several clips or "pin" it to a single clip. -
I lost the speaker sound suddenly while listening to a previously aired radio program. Cannot hear any sounds on my Apple 4S iPhone since it happened. Cannot even hear Siri anymore. Can only hear any sound at all using my ear buds. No speaker sound whatsoever. Any suggestions? I've already restored the whole system using iCloud as my backup. I've also rebooted the phone several times. The sound functions well using headphones (which i was not using when the speaker sound all of a sudden stopped working in the middle of the program). I tried cleaning any debris from the speaker and other crevices using a toothbrush and have tried blowing any debris out too. I pressed up on the charging dock using a pen and tapped on the speaker side to dislodge any debris. I even stuck my phone in a plastic bag and put it in the freezer as someone suggested. Any other ideas? I even deleted an app to free up some space. Any other suggestions please?
it's a hardware issue read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?q=iphone+stuck+in+headphone+mode&oq=iphone+stuck+in +&aqs=chrome.3.69i57j69i65j69i61j69i59j0l2.4192j0j7&sourceid=chrome&es_sm=93&ie= UTF-8 -
I have living room speakers connected to an airport express and available via airplay from my computer, ipad2 and iphone which is great for playing music. My question is, can I use those speakers to play sound from videos running on my apple tv? For instance if I use airplay to run a video on apple tv from my computer or iOS device, can I have the audio play on my speakers connected to an airport express? It would be amazing to be able to use the speakers simultaneously with the apple tv as they are both on the same home sharing network. Possible?
No. But, are your speakers only connected to the AE or are they also connected to an amplifier?
You would need to use a Toslink cable to go from the Apple TV to the speakers/amp.
I don't use this or know a lot about it, but it is wildly popular, inexpensive and may be of help:
http://www.rogueamoeba.com/airfoil/
Message was edited by: bobbyco57 to add Airfoil info. -
ive got a mac book pro i bought the lead to connect to the tv but is there a lead for the sound to come out of the tv and not the laptop?
Depends which Macbook Pro, depends what cable you have. MBPs from 2010 onwards can transmit audio through their Displayport connectors if you have an HDMI input on your TV and an adaptor which also transmits audio. Not all Displayport-HDMI adaptors do this. If you're trying a VGA input on your TV, that will not carry audio.
If your MBP is older than 2010, you will need to use a separate audio cable to connect from your computer's 3.5" mini audio connector to the appropriate audio input on your TV.
Matt
Maybe you are looking for
-
When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to
-
Lack of UI and No Cover Flow for Videos?
Why is there no cover flow in the iPod touch/iPhone/any iPods for movies and videos? I don't even remember seeing a menu bar at the bottom of the screen to view videos in different categories. Has anyone else noticed the lack of a good UI in the Vide
-
ITunes crashes every time I sync music at 128kbps and jacks the HDD up...
I'm at my wits end trying to figure this out. It will sync ok when I use the default bitrate, but my music is on average 320kbps or higher and it eats up all the room on my iPhone. I paid for a 32GB model so I wouldn't have this problem. I took the p
-
How to create new rows in a JTable dynamically?
I want to add new rows to a JTable dynamically based on my resultset from the database . How to do ? Please help me Thanks in advance
-
Can ASM be used in single node 11g?
I tried to create DB in 11g using ASM, but I was asked to create oracle CSS services (which is for RAC). of course it failed. My platform is oracle linux 5. As I remember 10g can use ASM (in Solaris), any one has idea about 11g? how to use ASM (not R