How Do I Network?

I have a Macbook Pro (OS 10.4.7) and an Apple G4 running OS 9.2. Both are connected wirelessly to the Internet through an Apple Airport Express base station. The G4 has its own set of accessories and equipment, including a printer, flatbed scanner, film scanner, and CD burner. What sort of networking is possible and how would I set it up? Can I share files only? Share programs? Get into one computer from the other? Get wirelessly from the Macbook Pro to the G4 scanners and printer?
I would appreciate any advice. I am not at all familiar or competent with networking procedures and have no idea how to go about it.
Thank you.

Hi,
I'm not able to answer to all your question, but here is 2 suggestions;
If your printer is USB you can plug it directly on the AirPort Express which have a USB plug for a printer.
You should also take a look on the features you can activate in the "Sharing" section of the System Preference. There you can activate the File Sharing.

Similar Messages

How do I network my desktop printer with my other MAC laptops? I forgot how to do it in the settings

How do I network my laptops to my printer? I forget what steps to use in Settings.

You posted in the iMac (PPC) community.
You would do better by posting in the "laptop" forum of the model "laptop" that you have. Your questions has nothing to do w/iMacs (PPC).

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How do I network my Mac book pro with my Mac air?

Hi - new at this Mac stuff: how do I network my Mac book pro with my Mac air? I am really looking to just share my photos from one to the other.

Connect them both to the same router.
They should show up in the left column of Finder under Shared.

How to show network status in top toolbar?

how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

How to monitor network load

hi,
How to monitor network load i.e. bytes sent/recieved.

what is your operating system?
refer the links, hope this may helps you.
http://hoopercharles.wordpress.com/2010/08/19/network-monitoring-experimentations-7/
http://www.remote-dba.net/t_tuning_monitoring_network.htm
http://www.activexperts.com/activmonitor/check/database/oracle/

How to calculate network bandwidth for dataguard 11.2

Hi all,
have a customer who needs to setup a new data guard environment in release 11.2.0.2. Primary site will be in Italy, standby site will be in New York.
He would like to know the network bandwidth between primary and standby site needed to obtain the maximum performance in redo transport with or without compression option.
I found a lot of threads and docs indicating some formulas but none of them explained how to:
- calculate network bandwidth on a rac system (having a single instance standby database)
- calculate network bandwidth in case of use redo transport compression
- calculate cpu consumption if using redo transport compression
Could you please give any advice?
A.M.

Hi,
customer made ma a lot of technical question just like the following:
- which are the main factors determining the 30% overhead indicated in the network bandwidth calculation
Required bandwidth = ((Redo rate bytes per sec. / 0.7) * 8) / 1,000,000 = bandwidth in Mbps
- how much bandwidth will I gain if I apply redo transport compression and why redo transport compression and why usually the gzip utility gives me 5X less and oracle compression gives me a maximum of 50-60% of compression even if it uses the same engine of zlib compression as indicated below?
Data Guard redo transport compression uses the same zlib compression engine at level 1 as gzip -1. To estimate the compression ratio you can achieve using Data Guard redo transport compression, first compress an archived redo log file with gzip:
$ gzip -1 <archive redo logfile>.arc
Then use the gzip --list option to explicitly display the compression ratio:
$ gzip --list <archive redo logfile.arc>.gz
Note: Use gzip version 1.3.3 or later. Refer to www.gzip.org for the latest information on gzip.
Could anyone give me any direction?
Thank you
AM

How to give network path while creating oracle directory.

I have created
CREATE OR REPLACE DIRECTORY TESTDIR AS '\\168.176.33.117\TESTDIR';
but through this path i m not able to create text file.
create or replace procedure WriteTest is
f utl_file.file_type;
s varchar2(200) := 'this is some info';
begin
f := utl_file.fopen('TEST2DIR','sample2.txt','W');
utl_file.put_line(f,s);
utl_file.fclose(f);
end WriteTest;
Help how to give network path while creating oracle directory.
--when i give local machine path then it will create at local machine where oracle is installed. but not able to create at other machine.
Zakir

Well for starters your directory object is called TESTDIR and in your fopen statement you are referring to TEST2DIR.
On top of that I'm not sure oracle is happy to refer to network locations. I think you have to map it to a regular drive mapping (shared directory) type path. Can't say I've every tried to do it though.

How to get Network Interface Cards information ?

hi all,
how to get Network Interface Cards information and tcp window size by java ?

807262 wrote:
how to get Network Interface Cards information Have a look at [url http://download.oracle.com/javase/6/docs/api/java/net/NetworkInterface.html#getNetworkInterfaces%28%29]NetworkInterface.getNetworkInterfaces()
tcp window sizeWhich one?
SO_RCVBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getReceiveBufferSize%28%29]Socket.getReceiveBufferSize()^
SO_SNDBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getSendBufferSize%28%29]Socket.getSendBufferSize()^

How to remove network devices through powershell? (scom 2012)

Hi
Could anyone says how to delete network device in SCOM 2012 through powershell?
In 2007 we have Get-RemotelyManagedDevice.
I have a big number network device in monitoring and now need delete some of them with specific filter, all switches.
How to do it?
Thanks
Alex

The devices were discovered by an old Management Server that was reinstalled.
I finally got those devices out of my SCOM environment using this SQL query (just replace networkdevicename):
UPDATE
BaseManagedEntity
SET
isdeleted=1
from
BaseManagedEntity where
BaseManagedEntityId in
(select
BaseManagedEntityId from
BaseManagedEntity where
displayname like
'%networkdevicename%')

How to create network activity

how to create network activity using bapi_network_maintain bapi
i am getting the error as incorrect object key for activity
reagrds

ok

How add virtual network in my guest domain?

I've installed ldom on T1000 in my Corp. There are primary, ldg1,ldg2.
bash-3.00# ./ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 1G 0.5% 15h 59m
ldg1 active -n--- 5000 8 4G 13% 82d 15h 15m
ldg2 active -n--- 5001 4 1G 0.2% 15h 44m
But don't understand that process an adding virtual network in ldg2:
I do:
1. #ifconfig bge2 unplumb
2.get mac bge2 and do: #ldm add-vsw mac-addr=00:14:4f:83:46:18 net-dev=bge2 primary-vsw2 primary
3.reboot #shutdown -y -g0 -i6 --------> after vsw2 don't show up in my primary domain!!!! WHY?
4.ldm add-vnet vnet5 primary-vsw2 ldg2
5.mv /etc/hostname.bge2 /etc/hostname.vsw2
6.Status ldg2:
NETWORK
NAME SERVICE DEVICE MAC
vnet3 primary-vsw0@primary network@0 00:14:4f:fb:ea:1f
PEER MAC
primary-vsw0@primary 00:14:4f:f9:d4:ab
vnet1@ldg1 00:14:4f:f8:3f:2e
NAME SERVICE DEVICE MAC
vnet4 primary-vsw1@primary network@1 00:14:4f:fb:63:3c
PEER MAC
primary-vsw1@primary 00:14:4f:f9:3c:de
vnet2@ldg1 00:14:4f:fa:18:75
NAME SERVICE DEVICE MAC
vnet5 primary-vsw2@primary network@2 00:14:4f:f9:df:f7
PEER MAC
primary-vsw2@primary 00:14:4f:83:46:18
7.When I do #/usr/sbin/dladm show-link ---> vnet not exist!
When error in my configuration?
And How reconfigure virtual network in prymary so that it exist in ldg2?
Please help.

After you ran the ldm add-vsw command did you run a drvconfig? If not then try that and check to make sure the entries under /dev/vsw0, 1, 2 etc all exist and are correctly linked.
Paul.

How many physical Network Adapter required for to implement NVGRE Gateway ?

Hello Guys,
Would like to know how many physical Network Adapter required to implement network virtualization including the technologies such as Windows Azure Pack| system center 2012 R2 & Hyper-V 2012 R2.
Thanks
NM-BG

A quick search of TechNet will turn up all sorts of step-by-step and overviews and blogs with lots of information about how to configure and setup. Minimum of two. Actual configurations may vary according to business needs and requirements.
. : | : . : | : . tim

How to reverse network cost

Hi All,
Can someone tell me how to how to reverse network cost
done thru cj9k
to bring back the project to its originall status
Thanks,
Regards,
Mercy

Hi Mercy,
The CJ9K do the plan costs calculation, the FI posting and purchase cause the actual costs and commitment. They have nothing to do with each othter.
To reserve the plan costs is somehow strange requirement. To remove the costing reporting information, the CJEN (with delete flag set) may the right one. But there is no transaction to reserve the plan costs. You can initialize the costs relevant information, e.g. planned work = 0, then re-calculate the network.
Kind regards,
Zhenbo

How to disable Network Address Translation

how to disable Network Address Translation

Hi KalaiArasu.K,
As Chen V said, please tell us more detailed information about your requirement.
In addition, please refer to the two following links to learn how to disable Network and computer from Explorer Navigation Pane:
How to Add or Remove Network from the Windows 7 Navigation Pane
http://www.sevenforums.com/tutorials/39699-network-add-remove-navigation-pane.html
How to Remove “Computer” from Windows 7 Explorer Navigation Pane?
http://www.askvg.com/how-to-remove-computer-from-windows-7-explorers-navigation-pane/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. What’s more, incorrectly editing the registry
may severely damage your system. Before making changes to the registry, you should back up any valued data.
For your infomation, plase refer to the following article to learn how to configure a Registry Item via GPO:
Configure a Registry Item
http://technet.microsoft.com/en-us/library/cc753092.aspx
Regards,
Lany Zhang

How I enable network service of Oracle database 10g XE ?

Hi,
How I enable network service of Oracle database 10g XE ?
Following error occurs when printing:
ORA-20001: The printing engine could not be reached because either
the URL specified is incorrect or a proxy URL needs to be specified.

ORA-20001 is a user defined error. So you will have to find out where it comes from.
Regards
Marcus

How Do I Network?

Similar Messages

Maybe you are looking for