How do i normalize the volume on all the songs
i need to normalize volume on all my songs. and i don't want to go through one at a time and do it. and the "sound check" on my ipod doesn't do a whole lot.
any suggestions would be helpfull
thanks!!
If you're using the soundcheck feature to level out the volume, it needs to be applied in iTunes using the edit/preferences/playback menu (Windows) as well as on the iPod.
Turn it on on the iPod using the settings/soundcheck/on menu.
After applying it in iTunes, sync your iPod to reflect the changes made.
There are 3rd party programs that do this more effectively (at least in my opinion).
For Windows there is mp3/aacGain.
Similar Messages
-
Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks
I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!
-
How do I control the volume so all my songs are the same loudness
On my older IPOD, one song plays soft, then the next is too loud. How can I control the volume so they are all the same loudness?
See the playback section (more specifically the Sound Check option) of this Apple support document for a possible suggestion.
http://support.apple.com/kb/ta38521?viewlocale=en_us
B-rock -
Why does my Ipod play at a low volume? When I have my earbuds in I have to have it at almost full volume, and when I plug it into a boombox it doesn't play as loud as the radio or a cd. I have the volume limit turned all the way up in the settings also. All my songs on my Ipod were burned from cd's(if that helps) thanks.
Sorry, I have the same issue.
So far searching threads here is not coming up with anything.
I have set aside my restore discs, to start the process of ripping the drive clean.
I tried Omni Sweep, but all it did was confirm the space I counted up.
Still does not show what's hidding. 113GB worth on mine.
That software really boggs down the system.
I could not load an email with it running.
Good LUck as well. -
ITunes starts automatically and the volume is all the way down
Hi everyone, lately I have been experiencing some issues with iTunes. It starts at login (even though the option is not selected) and gives me an alert that the app volume is turned all the way down. Furthermore every time I try to turn up the volume, it will automatically jump back to the previous point.
After many tries, I finally completely re-installed my OS and moved all my data through migration assistant. I only moved applications, music, pictures and documents, leaving behind all the configuration files and other stuff that seemed replaceable. This didn't work either.
Any suggestions?common problem..sounds like your volume flex cable has shorted. bring to apple service tream
-
My pre has volume up all the way, but the sound is still quiet
well i sent my first phone into palm because the speaker blew out on it, so i sent it in and i just got the phone back like an hour ago and i put my music on it and the sound was soo quiet...i played the ringtones with the volume up all the way and it was no better, everything that came out of that speaker was quiet and i could only hear it if my ear was like less than a foot away from the phone, has anyone had this problem before or do i need to send it in again
Post relates to: Pre p100eww (Sprint)Did you do a restart on the device? What about a partial erase? You still may need to return the device due to that the speaker or the sounds are to quite but I want to be sure this is not an OS issue.
Message Edited by thepoeta15 on 09/19/2009 07:35 PM -
The sound effects volume is all the way down. It pops up for a second once in awhile and then disappears. I can't find it in the Setting. Music sound plays fine, but no sound on my apps. Any idea how to fix it?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
How do I get the volume to be the same on all songs in itunes?
how do I get the volume to be the same on all my songs in i
tunes?maybe the check box Sound Check in iTunes > Preferences > Playback Preferences
will help? -
How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)
Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader. -
Hi,
I need to control the volume of all sounds in the movie even
if they were in the timeline so they do not have an instance name,
by AS3.0 code?
thanks a lot.:
var st:SoundTransform=SoundMixer.soundTransform;
st.volume=whatever;
SoundMixer.soundTransform=st; -
I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?
rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR -
Basically any iDevice I plug into my PC lowers the volume of all active applications to about 10% no matter its previous level. I've tested this with several iDevices and they all act in the same manner. I've reinstalled iTunes and tested this out on a fresh install of Windows 7 Ultimate 64-bit.
I actually figured out the fix for this. The issue was how Windows interacts when a communication device is plugged in. If you follow the path Control Panel -> Sound and click on the communications tab (in Windows 7) you can change event "When Windows detects communcations activity: " to not lower any of the sound. I hope this helps! It plagued me for a good few months before I realized it.
-
my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?
Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right. -
How to take the back of all the Projects from PWA 2007 to PWA 2012
I had already created projects in PWA 2007 and i want to take the backup of all the projects in PWA 2013 .how to do that .Please reply soon.
Hi,
assuming you want to use Project Server 2013 (there is no 2012).
If you want to get everything from 2007 into 2013, you should perform a migration:
https://technet.microsoft.com/en-us/library/ee662496(v=office.15).aspx,
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx, and
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx#section3
If you only need to get certain projects, you can save them as local file from 2007 and re-save them to 2013.
Does that help?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support! -
I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?
Backup do not contaiuns music or apps, you will either need to resync them from your itunes computer, or you can go to purchase history in itunes or app store app and go to purchase history and redownload them.
Maybe you are looking for
-
Interactive booklets don't work, flash playback option nonexistent.
I have an interactive booklet, but whenever I open it, a black screen shows and it goes through 3 seconds of a silent track. I went to this link but the "Enable playback of Adobe Flash tracks" is nonexistent. I have the latest version of QuickTime an
-
In general, If I want to construct a query, such as, SELECT t1.fld1,t1.fld2,t1.fld3, mStr FROM tbl t1 WHERE fld3 = 1 WHERE fld* are fields in table "tbl" and mStr is dynamic and is to hold a TRUE/FALSE value. mStr is to be constructed using something
-
How does a workflow get triggered when we create a Shopping cart
Hi all, In SRm how does a workflow gets triggered when we create a Shopping cart...what i mean is that in r/3 we use changedocument object or function modules etc..likewise in srm how the wf gets triggere...can anyone help me. Thanks&Regards, Hari
-
Dump VT02n - DYNPRO_SEND_IN_BACKGROUND
Hi All, I m getting a dump - the dump says the below error : "DYNPRO_SEND_IN_BACKGROUND" " " "SAPMV56A" or " " "TRANSPORT_LESEN" The current ABAP program "SAPMV56A" had to be terminated because it has come across a statement that unfortunately cannot
-
We are opening pdf file in flex air application. but for some user we are facing this issue.