How do I not include myself when using 'Reply to All'?

I'm sure Apple Mail used to send copies of an email to everyone except myself when I hit 'reply to all', but all of a sudden I am being included on the distribution list.
Is there a way to toggle this setting? I can't find anything applicable.
I've looked in Mail -> Preferences... -> Composing and the box labelled 'Automatically Cc: myself' is unchecked.
Any help would be appreciated.
Thanks
Mike.

The settings for this are set per account. So you could turn it on for an account that you use for business, and off for your personal account.
I don't know of any setting to change it per addressee, which might be one way of doing it.

Similar Messages

  • IPad 2, mails not being sent when using reply to all feature

    Hi,
    Under BYOD we have iPads being allowed in our office environment. We have Lotus Notes Traveler servers setup for email access.
    We are facing an issue with one executive users iPad 2 in the mail app.
    The issue is when user is on WIFI and uses a long signature in the iPad and does a "reply to all" to any mail the mail goes and stays in the outbox.
    Single reply or composing a new mail works fine. If we remove long signature, then "reply to all" works fine.
    This issue is only with Wi-Fi, on GPRS everything works fine with long signature or without.
    The iPad is on iOs 6, we tried resetting and restoring the iPad but the issue still persists.
    Would really appreciate if you all could help me solve his issue.'
    Thanks

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Database is not getting shutdown when using command "stopsap all"

    I installed ERP 2005(ECC6.0) using oracle on HP-UX with SID=ER1, The installation was successful, but I am facing two issues now.
    1. When I stop sap using command 'stopsap all' only instances is getting shutdown not the database, I have to Explicitly shutdown the database (oracle).
    rp34-109:er1adm 26> stopsap all
    Checking ER1 Database
    ABAP Database is running
    Stopping the SAP instance DVEBMGS01
    Shutdown-Log is written to /home/er1adm/stopsap_DVEBMGS01.log
    Instance on host rp34-109 stopped
    Waiting for cleanup of resources............................
    Stopping the SAP instance SCS02
    Shutdown-Log is written to /home/er1adm/stopsap_SCS02.log
    Instance on host rp34-109 stopped
    Waiting for cleanup of resources.........
    Database is still running on remote DB server
    Log on to DB server and stop database
    TRANS.LOG
    OCI-call failed with -1=OCI_ERROR                   2066  0.175292
    4 ETW000  [dev trc     ,00000]     SQL error 942: 'ORA-00942: table or view does not exist'
    4 ETW000                                                                              71  0.175363
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => ORA-942 when accessing table SAPUSER
    4 ETW000                                                                             115  0.175478
    4 ETW000  [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 942          50  0.175528
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                  205  0.175733
    4 ETW000  [dev trc     ,00000]  Rolling back transaction ...                         127  0.175860
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=0x80000001010858c0,usrhp=0x8000000101075a70)
    4 ETW000                                                                             272  0.176132
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     844  0.176976
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                  42  0.177018
    4 ETW000  [dev trc     ,00000]  Connecting as SAPER1/<pwd>@ER1 on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
    The Second issue that I am facing is with the dbs_ora_schema= SAPSR3,
    but my SID is ER1, it should display SAPER1, can anyone help in changing this.
    I tried changing this in .dbenv_hostname.csh & sh files but changing that I even unable to start sap again

    Hi
    Pls follow the notes 400241,662644.
    If u follow above notes you get the result.
    Feel free to revert back
    Pls provide the points if u get the answer.
    ---venakt.

  • N Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.  Anybody have any idea how to stop this?

    In Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.? Anybody have any idea how to stop Mail from including my email address in the cc line when using "reply all"?

    Automatically cc myself is not checked.  I did find out that if you have multiple email address that all of them need to be associated with "My Contact" tab.  Thanks

  • After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

    after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

    Hi Buterem,
    I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
    How to use Activity Monitor - Apple Support
    If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • How can i NOT include top level keyword in the metadata of an image?

    Hello,
    I want to know how can i NOT include top level keyword in the metadata of an image. I know there is an option for not applying a keyword to an exported image, but is there an option for not applying the top level keyword to the actual image?
    I have organized my geographical (by location) keywords like this:
    Places
    USA
    New York
    Miami
    Spain.
    If i add geographical keywords to all my images, all my images will have the keyword "Places", i dont think that it have any sence to have all your images with one keyword. How can i fix this? Any sugestion? i will appreciate it a lot any help or information that you could give me.
    Excuse my english, i know it is not good. I hope that you could understand me.
    Thanks,
    Marcelo :)

    Explicitly excluding a keyword only applies when "exporting". Unfortunately, there's currently no way to stop the keyword being written to the file when "Save Metadata to File" command is used. The natural reaction of users to this difference is to suggest that it is stupid. Nevertheless, there are good reasons why the difference exists:
    1. "Export" creates a new file whereas "Save Metadata to File" writes the metadata back into the existing file.
    2. There are very good reasons why certain keywords should not be written to file, and the example given in the OP is one. Saving metadata to file is more often used as means of backing up important image related metadata, independently of the catalog or allowing the metadata to be visible in other aplications. It would be rare that such a file would be shared with a third party, so the reason for not including certain keywords is less obvious. Actually, not including it can result in no end of confusion and grief. For example, if the top level (or any keyword) was excluded during the save metadata process then the other keywords would be orphaned when image is imported back into the catalog (e.g. buiding a new catalog).
    The development team are aware of the need, in some circumstances, to exclude certain keywords when save metadata command is used. How and when the issue is resolved, without adding even more confusion/complexity, is some way off.

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

    Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
    Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
    This is the biggest question, where I mainly want a conclusive answer:  How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
    Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

    I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
    Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
    I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

  • How do I close a JInternalFrame when using subclasses and a separate cla...

    The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
    I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
    class Superclass extends JFrame
         JButton b= new JButton("ok");    
         Superclass()
    class Subclass1 extends Superclass
         Subclass1 ()
              add(ok);
           ok.addActionListener(new Listener());
    class Subclass2 extends Superclass
         Subclass2 ()
              add(ok);
           ok.addActionListener(new Listener());
    class Listener extends Superclass implements ActionListener
         public void actionPerformed(ActionEvent e)
                   dispose();
    }How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

    First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
    It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
    JComponent component = (JComponent)event.getSource();
    JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
    frame.dispose();
    Ok, I will make a try:
    public static Container getAncestorOfClass(Class c, Component comp)
    w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
    "getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
    "w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
    "this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
    When I thought you wanted to close an internal frame then the code would have been something like:
    JComponent component = (JComponent)event.getSource();
    Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
    JInternalFrame internalFrame = (JInternalFrame)container;
    internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
    http://homepage1.nifty.com/algafield/sscce.html

  • How can I customize the toolbar when using the attribute browser

    In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
    Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
    Solved!
    Go to Solution.

    Luis,
    It's nice to have you back 
    Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
    So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)... 
    Thanks
    Wolfgang
    Source code:
    UI editor:
    Attribute browser:

  • Can not print report when using HTML or DHTML

    Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
    Any Ideas?
    Thanks
    Jeff

    Hi,
    I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
    Thanks,
    SK.

  • RPC Server not Available error when using Windows Fax & Scan under Windows 7

    RPC Server not Available error when using Windows Fax & Scan under Windows 7

    Hi,
    On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
    RPC Server not Available error when using Windows Fax & Scan
    under Windows
    The local fax account is inaccessible after you rename a Windows Vista-based computer
    Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
    make sure that you completely understand the risk before retrieving any suggestions from the above link.
    If any update, please feel free to let me know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I stop system sounds when using AirPlay on my MacBook Pro?

    Hi all,
    Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
    Many thanks in advance, Jon.

    Open AirPort Utility located in HD > Applications > Utilities
    From the AirPort Utility menu bar click AirPort Utility > Preferences
    Deselect:   Monitor AirPort base stations for problems

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • "access restrictions" did not work sometimes when using 3-tier DeskI.

    My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
    But this issue can be solved by logging on from another machine, or restarting the DeskI.
    For I can reproduce this issue, so I just want to know that:
    1.What is it probably related to?
    2.If this issue happens again, what can I suggest my customer for tracking it?
      For example, get some log files from servers etc.
    Thanks!

    Hi Sarah,
    Also you can try the following solution.
    1. Import the universe.
    2. Go to manage access restrictions
    3. Remove the restriction .
    4. Again create the rescrition and unchecked the " limit size of result set to"
    5. Now assign it to the unlimited results group ( this is the name of
    the group we have given to those users who should be able to retrieve
    more than X rows)
    6. Now we save the universe. (Dont export the universe).
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

Maybe you are looking for