How do I notify Apple of a software failure: in Win 7 64 bit, using Get Info function causes iTunes 10.5 to fail and exit?

I have Win7 64 bit running iTunes 10.5. When I import a CD and click on the "Get Info" context menu item for the CD drive item on the left side of the window, the expected context menu and input boxes appear. When I type anything into any of the available input boxes, iTunes immediately throws a fail exit to Windows. Here are relevant screen shots:
Right click on CD Device item to get context menu:
Click on Get Info menu item to open CD Info window:
Key in "A" in Artist input box, get immediate failure:
So far Microsoft hasn't notified me of any solutions to this failure.
This info needs to get to Apple, but I am not paying to give them information to fix their problems!
Thanks for passing this along.
D. V. Hirst
PS: As a work around, I can highlight the entire CD worth of tracks and edit the common information in the Get Info function at that level... Still, iTunes should not be throwing program failure exceptions in any case. It is especially annoying on such common functions. One might have expected a more thorough testing program prior to general release.
DVH

Thanks for your response. I attempted to do that, but I couldn't find any way to access the configuration for the Zhone router. Typing the IP address into my web browser's address bar only resulted in "page could not be found" or "page timed out", etc. I called tech support at Northstate, who likewise suggested that the Zhone router should be set to bridge mode and the AEBS set to router mode since it would be easier for me to configure the AirPort. After wrangling a bit with them over my inability to change any settings for the Zhone, they sent a technician over. He messed around with the Zhone, apparently putting it in bridge mode, and we managed to get the AirPort to work without any double NAT errors. I reset the AirPort and created a new configuration file. Unfortunately, when I went to the Advanced/Port Mapping menu and repeated the original steps to forward port 7777, tests at www.whatsmyip.org still returned "timed out". The technician said he wasn't knowledgable enough about Apple products to assist me any further and suggested I call their tech support or visit the nearest Genius Bar. So that's about it. Any other ideas?

Similar Messages

How do I notify apple that I need a refund of the $100.00 that I paid for fifty gigs of iCloud I can't use because I thought I could add my music library to it but I can't because iTunes sharing isn't running yet ?

How do I notify Apple that I need a Refund of the $100.00 that I paid for fifty gigs of iCloud storage that I can't use because I thought I would be able to put my music library on it and found out I can't? Only iTunes purchases are capable of use in iCloud presently.

1-800-MYAPPLE

How do I notify Apple of a a change of email address?

how do I notify Apple of a change of email address?

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Click "Manage your Apple ID'" and change your email address there.

I forgot the answers to my security questions, and the reset e-mail was never sent. How do I notify apple that they never sent me the reset e-mail? Thank you.

I'm trying to download apps on my new iphone 5s, and I forgot the answers to my security questions. The reset e-mail was never sent. How do I notify apple that they never sent me the reset e-mail? Thank you.

Hello there, movies989.
The following Knowledge Base article provides some great steps for issues with Apple ID security questions and contacting Apple Support:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Of particular use in your case:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

An apple App Store editors choice app was recently upgraded and is now terrible. How do I notify Apple to review this app?

Boom Beach is listed as editors choice at the App Store. There has been an upgrade recently and the app is not terrible. I would like apple to revisit their listing it as an editors choice. How do I notify Apple?

Already did both. Players of the game are complaining in huge numbers. They have a forum that is filled with complaints and the App Store reviews are also reflecting player concerns. You should see it! Developers seem interested in quick cash which will cost them in the long run as most current players who do spend some money but not huge amounts are quitting and complaining everywhere that they can on the way out.

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

I purchased songs from 2 different computers using itunes with the same apple id. I had 1 iPod I used for these but I just recently got an iPhone and I was wondering why it wasn't letting me put my purchased songs on my iPhone?

You can transfer iTunes content from an iTunes library on a single computer only.
Since these songs were purchased with the same iTunes account, you can download the song that is not in your iTunes library on the computer you will be syncing your iPhone with. Or you can download the song or songs direct on your iPhone.
http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US

ITunes movies no longer sync from Dell laptop or MacBook Pros (both authorized devices) to iPhone 6s or iPad Air 2s after configured at Apple store yesterday. In the past I could see the movies in iTunes with the cover photo and sync.

iTunes movies no longer sync from Dell laptop or MacBook Pros (both authorized devices) to iPhone 6s or iPad Air 2s after configured at Apple store yesterday. In the past I could see the movies in iTunes with the cover photo and sync to the other devices but now there is a listing a movies with no cover photos and in fact if I try to view the movie on the MacBook Pro it cannot be found unless I download it.

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

Right click - get info.

How do i set up my email so i would need to use password to sign in, instead of clicking on icon and open it directly?

How do i set up my email so i would need to use password to sign in, instead of clicking on icon and open it directly?

You can't with the built-in Mail app. There may be third-party email apps in the App Store that have a password option, or you could access your account via Safari - go to your host's login page and then create a homescreen shortcut for it via the 'share' icon (the square with the upward pointing arrow), tapping on that homescreen shortcut will open Safari on your login page.

Ever since I upgradeHd to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on thevworks?

Ever since I upgraded to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on the works to resolve the problems? I know other users are having the same problem.

Back up your iPad. Then restore the iPad to the original factory settings. Then restore from your backup. Things should improve for you.

How do I notify Apple about incorrect Map directions?

Getting the street directions in NYC is a drag and can require another 15 minutes to get you places. All it takes is one wrong turn! How do I notify the powers that be to make that change? I can't find anything on the support page.

You do it within the maps app itself. Click on the circled "i" on the map page then Report a Problem.
I quit using Apple Maps for directions.

How do I notify Apple of a software failure: in Win 7 64 bit, using Get Info function causes iTunes 10.5 to fail and exit?

Similar Messages

Maybe you are looking for