How do I number a ticket in 2 positions starting with 7001?
How do I number a ticket in 2 positions starting with 7001?
Data Merge is actually quite simple.
If you have Excel it's even easier.
Create 2 columns with column headers, maybe (Ticket #1, Ticket #2) and add your numbering to the rows as far as you need. Save is as a CSV file. Excel complains a few times so just keep clicking yes. Close the file after you are done. InDesign will complain the file is open.
In InDesign open the merging document. Open the Data Merge panel (Window - Utilities - Data Merge) With the window open Click the additional options button (down arrow with the 4 little lines) and choose Select Data Source to pick your CSV file. Once selected in the main portion of the panel it should list the 2 different columns. From there use the text tool to select where you want to number then click the column for one of the numbers from the data merge panel. A blue marker will appear with the column header similar to <<Ticket #1>>. Once that appaers you can click the preview check box in Data Merge and it will start showing your number. When you have finished click the addtional options button again and choose Export to PDF to export the tickets.
Similar Messages
-
? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .
Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl -
I am putting together a book with iBooks Author and all of my pages are numbered (3) how can I change them to an acceding order starting with page one?
Sorry I didn't get the tip link right: Change page number style
-
Question
when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, PeterSee this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
Question
When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, PeterSee this. <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
How do I get rid of bad email that starts with info @ they jam if opened
Anybody know how to get rid of bad email that starts with info @ in the address bar? They jam the mail program if opened, now I have 25 that need to go! Help?
You only need to post once. You have to have some patience. I posted this response in your other question as well.
Don't open those emails, swipe across them in the preview window to bring up the red delete button and use that.
If the mail app is frozen and you can't do anything in it, close it from the recents tray and reboot the iPad.
From your home screen, double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail app icon. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
How to create flip book in InDesign so it starts with a single page
The flip book out of InDesign is cool - but I have not been able to find a way to create it so that it starts with a single page, rather than a spread (with a blank white page opposite the cover). Any help appreciated.
Moving thread from Creative Cloud Forum to InDesign Forum.
Hi there,
Currently, there isn't a direct way to make the cover page a single page through InDesign. You'll need to 'fake' it by fill the left side (first page) of the spread the same color as the background of your web page.
Petteri_Paananen has suggested an alternative workaround using eDocContainer. You can find more info here: http://forums.adobe.com/message/2279180#2279180#2279180
Hope this helps and feel free to let us know if you need more assistance -
I would like to consolidate all my prior catalogs and only deal with the current one in LR5? I do not want to lose any of my prior master images.
Carefully.
Backup all the catalogues first, so you can always get back to square one. Then open your main catalogue and use File > Import from Another Catalog to bring in the other catalogues. -
Is there a method to change the Start Screens number of rows (similar to Windows 8.0's use of the Explorer\Scaling\MonitorSize in registry). Possibly by forcing the switch for "Show More Tiles" via script etc? This is to enable the device with
Windows 8.1 to be built using a deployment methodology like SCCM and have the Tiles correctly configured as required for a standard look and feel across devices. I do not know why all these switches are not represented in either WMI or the registry to enable
the customization of look and feel out of the box for enterprise deployments.
Thanks for any assistance possible.Hi,
You can try steps in this article.
How to Change Number of Apps Tile Rows on "Start" Screen in Windows 8 and Windows 8.1
http://www.eightforums.com/tutorials/2690-start-screen-metro-apps-change-number-rows-windows-8-a.html
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Hope this could be helpful.
Kate Li
TechNet Community Support -
How can i completley wipe my iTunes library and start over?
I messed up my library and by mistake re-named many songs with one title.. also have many 2x or 3x songs.. my itunes is a mess!
How can i completely erase all the songs and start with a new itunes (and then i'll download my past purchases and my files and so on...). I have the latest version of itunes.
Thank you in advance!Delete the entire /Music/iTunes/ folder.
Make sure you have a backup of all your media files (the /Music/iTunes/iTunes media/ folder). -
How do I clear the passcode from my I-pad, I never did set it to start with
How do I clear passcode, never did set to start with?
Hi airbluecat,
Here is the article about resetting the passcode. The first section being the easiest.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thank you for visiting Apple Support Communities.
Nubz -
I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?
Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys. -
How to create automatic serial number for ticket in illustrator?
How to create automatic serial number for ticket in illustrator?
Check this out
http://forums.adobe.com/message/1271310#1271310 -
Presentation of existing :
In our model, we will have 1 DSO with ticket information: CalDay, Ticket ID and Product
A product is lowest level of hierarchy composed of following nodes :
u2022 Sector
u2022 Module
u2022 Family
We want create a report which display how many tickets are linked with each level node.
Example:
DSO Data:
CalDay | Ticket | 0MATERIAL | Family | Module | Sector
Day 1 | 1 | 581923 | 14 | 1 | 3
Day 1 | 1 | 529940 | 14 | 1 | 3
Day 1 | 1 | 529939 | 88 | 2 | 3
Day 1 | 2 | 529939 | 88 | 2 | 3
Day 1 | 3 | 581923 | 14 | 1 | 3
Day 1 | 3 | 529940 | 14 | 1 | 3
Day 1 | 4 | 529940 | 14 | 1 | 3
Day 2 | 11 | 529940 | 14 | 1 | 3
Reporting example (criteria selection : Calday = Day 1):
Report 1 :
Product | Number of tickets
581923 | 2
529940 | 3
529939 | 2
Report 2:
Family | Number of tickets
14 | 3
88 | 2
Report 3:
Module | Number of tickets
1 | 3
2 | 4
Report 4 :
Sector | Number of tickets
3 | 4
Constraints:
u2022 Hierarchy can be changed every day (refresh indicator require)
u2022 High volumetric of Ticket information (Daily full update not possible)
u2022 Ticket information available in DSO will not be loaded into cube (no reporting at ticket level required).
Could you please help me to desing this in BW?
Regards,Closed
-
How to Plot number and string in one row (data logger counter) ?
hi all i made data log quantity using Digital Counter via modbus to monitoring quantity and reject that has and Name Operator, Machine and Part Number.
i have problem about plot the number & string in one row, as shown on the picture below :
how to move that string on one row ? i attach my vi.
Thanks~
Attachments:
MODBUS LIB Counter.vi 39 KBDuplicate and answered - http://forums.ni.com/t5/LabVIEW/How-to-Plot-number-and-string-in-one-row-data-logger-counter-via/m-p...
Maybe you are looking for
-
Using my MacBook with a broken display on my tv please help!
My MacBook Pro has a broken display. I want to use it on my tv but when I plug it in using an hdmi I cable all I get on my tv is my wallpaper. I have read that I need to take my macbook out of extended desktop mode to actually use it this way but I o
-
how to create request for IVL (/OBIZ/SAPMZFT_SALDUEV32) report
-
Mass change for condition record
I try to change the condition record for material with validity period of one year starting next year Jan 1st. Since that material is already exists in the system with validity period of current date to 12/31/9999, it is not saving my changes. When i
-
Partitions on external hard drive. Need advice, PLEASE!
Can someone explain to me about partitions on EHD's. I have just installed Leopard, and at present I have 3 partitions on my LaCie 250Gb Firewire external drive. I need to create enough space to allow TimeMachine to do a backup (about 120Gb). I know
-
When we access a site,or receive email with pictures we often get a blue square with a question mark in it, no picture ?