How do I only get certain questions appear in the quiz results?

I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
Can anyone advise how I can only get certain questions appear on the quiz results please?

Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
Lilybiri

Similar Messages

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • How do i prevent a slide that is after the quiz results page from showing?

    HI guys, I am trying to achieve the following in Captivate 6:
    1) Users answer questions. They have 2 attempts to pass with 70% or above.
    2) At the quiz results page, if the score is less than 70%, users get a button to retake the quiz. After the second attempt, If the percent is 70% or above, they can click a button to view a certificate or click a button to see a transcript. If the percent is less than 70%, they click a button to get a transcript but NOT a certificate.
    How can i accomplish this since i cannot add buttons to the quiz results page.

    Thanks for the feedback.
    I am trying to implement a simple hide/show routine and it does not work. This is what I want.
    I have two buttons (one to save a certifcate and one to save a course transcript).  I want to display those on the quiz results screen. The user has two chances to make a 70% or more on the quiz.
    If the user obtains less than 70% score on the first try, on the quiz results slide I want to hide the button to save the certificate but keep the one for the transcript. If the user passes with 70 or more, then both icons remain on screen.
    IF the user obtains less than 70% after the second try, the quiz results should only show the transcript button. If they pass with 70% or more, then both icons remain on screen.
    I tried advance interactions to hide or show the icons in the "on slide enter" on the quiz results screen but that did not work.
    This is an example of what i tried. if cpQuizInfoQuizPassPercent is less than 70% hide btncert. I also tried hiding the button and then assigning actions to show the button on passing the 70% but that did not work either.
    Suggestions?

  • How to allow learners comment about course after the quiz result page?

    How do I go about allowing the leaners to comment on the course they have taken which should appear after the quiz result page. And how can their comments be send to us or reported back to us in some form so that I can see what their comments were.

    Check the settings for each quiz question to verify they are set to report a score to the quiz.  At the moment, from what I can see in your Advanced Interaction dialog, they may not be reporting to the quiz.

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • How do U get icloud to appear in the finder

    in Mountain Lion you can save text edit files to the icloud. How do I get iCloud to appear in the sidebar in Finder. On icloud only iwork is displayed for files.  I usedropbox and it looks just like any other folder in Finder. Does iCloud behave the same?

    Thanks. It began to dawn on me that this was the case as I try to poke around for ways to do this.  I will continue to use Dropbox which works fantastically. Just wonder why Apple would come up with such a limited option.

  • How do i only download certain pictures from my camera?

    everytime i hook up my camera it tries to download all of my pictures... how do i only get the ones i need?

    Hi.
    Ignore iPhoto's initial 'ready to import...' screen. Instead, choose File > Import to Library. There you'll get a navigation dialog. If your camera mounts on the Desktop like an external drive (it appears in the left column of a Finder window, below your Hard Drive) then you can navigate to the camera, preview the files, and select only the ones you wish to import.
    If your camera does not mount on the Desktop (most Canons don't) then you can mount the card by using a USB card reader.
    Or, use the multi-step method where you launch Image Capture, "Download Some" to a Desktop folder, import into iPhoto, and delete the Desktop folder. This method allows you to browse the files on your camera even if it doesn't mount on the Desktop.
    A general Mac technique that works in the Finder, iPhoto, and many apps:
    Shift-click to select a contiguous range of items;
    Command-click to select or deselect discontiguous items.
    About Image Capture: Command-click works if your put the window in 'List' view.
    Regards.
    Message was edited by: Smtr

  • HT4993 my emails are not updating itself automatically. I only get emails if i open the mail application in my iphone. How to update emails automatically?

    my emails are not updating itself automatically. I only get emails if i open the mail application in my iphone. How to update emails automatically?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

    When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

    You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
    If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
    In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
    Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
    Then check, if you now are able to read the library properly on your iMac.
    Regards
    Léonie

  • I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

    I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

    Try Handbrake (http://handbrake.fr/), it's good and free

  • I have iphoto 6.  How do I only selecy certain photos from my camera when importing rather than all of them as show in the import page that loads

    I have iphoto 6.  How do I only selecy certain photos from my camera when importing rather than all of them as show in the import page that loads

    You use Image Capture (in your Applications Folder) for that job - or upgrade to a later iPhoto.
    Regards
    TD

  • Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

    Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

    Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
    I tryed the reboot pocess, but it didn't fix it
    I haven't tryed the restore to factory settings process,
    Is there a way to downgrade to iOS 5.1 again?
    Thaks

  • ALV: how to display only subtotals and total rows in the output

    ALV: how to display only subtotals and total rows in the output
    i am getting output
    i am getting subtotals for respective fields
    but i want to display only subtotals and totals rows in the output
    i have tried the
    totals_only   parameter in slis_layout_alv
    but it is not working.

    hi,
    For TOTAL
    For the amount field / quantity field in the field catalog give DO_SUM = 'X'    for WHOLE total
    For SUBTOTAL
    For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
    DATA: lt_sort type SLIS_T_SORTINFO_ALV,
    ls_sort type slis_sortinfo_alv.
    CLEAR ls_sort.
    ls_sort-spos = 1.
    ls_sort-fieldname = 'Give the field name that you do the sum'.
    ls_sort-up = 'X'.
    ls_sort-subtot = 'X'.
    APPEND ls_sort TO lt_sort.
    fieldcatalog-do_dum = 'X'.
    for subtotals
    WA_SORT-FIELDNAME = 'ERSDA'.
    WA_SORT-SPOS = '2'.
    WA_SORT-UP = 'X'.
    WA_SORT-SUBTOTAL = 'X'.
    APPEND WA_SORT TO IT_SORT.
    Refer
    http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
    regards,
    Prabhu
    reward if it is helpful

  • Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

    Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
    Baffled in SB

    What format of MPG is this?  Is this an MPEG1 or MPEG2 video?  How was the video created?

  • HT4623 i was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks

    I was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks

    Hello taranpahara,
    The following article provides steps that can be quite helpful in getting your iPhone updated.
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Cheers,
    Allen

Maybe you are looking for