How do i open a pdf file that say's i do not have permission to open it when i created it ?

hi my hard drive died and i have replaced it but now i have transfered the files back to my computer but it will not let me open them it tells me i do not have permission to open them what do i do ?

THANKS FOR THAT BUT HOW DO I DO THAT
On Sat, Jun 7, 2014 at 7:00 PM, Pat Willener <[email protected]>

Similar Messages

  • Error while collecting files in AE CS3 - You do not have permission to open this file (-54)

    I've got a rather large project that I'm attempting to collect.  35,000+ files to collect (lots of image sequences as footage), totaling near 80GB.  The collect process starts and copies files for a while, but inevitably errors out during the copy procedure with the error "You do not have permission to open this file" -- a different file each attempt.
    I'd read some complaints of a similar error last year due to QT 7.4, but I'm on the current Quicktime (7.6.4).
    Anyone seen this before?  What can I do!?  Thanks in advance for any ideas.
    --Rob LaRose
      Imaginary Forces

    Well, we're just a small shop, but since it usually falls upon me to administrate, here's a few general tips:
    Hide all resources that are not meant to be accessed by certain people. This can be done easily by using different sub-nets on your network and defining access privileges. Write down the network MAC addresses and use a whitelist/ blacklist. A bit of work initially, but a lot safer than working with user names.
    Forget about individual user privileges. At one point or another everyone will bump into situations where they cannot access stuff, but need it for their work. Simply ramp up all users to Power User status, but assign individual groups to them which only you can manage. That leaves it up to you to define who can access what, but without having to dig so deep that you always end up with individual adjustments. You merely add or remove users from groups (which is more practical for interns and freelancers, even)
    Quota can do miracles for you. If a user only has x GB of storage available, he'll quickly learn to not create redundant data by copying files.
    Prevent all local storage. Artists have a tendency to offline files at whim for experimentation and then forget about it. Give them a "garbage dump" directory on the server instead where they can store their private data and any non-persistent work files, but with quota. Use server-side desktops and user home directories, if possible, but unfortunately many programs cause problems with that (including Adobe's), so it's not always an option.
    For each new project, create a pre-defined folder structure. We e.g. use number_clientname_worktype_year for the root, and inside have directories for compositing, 3D stuff, print, client data etc.. Define it so from the getgo, that specific structures like project directories for 3D programs with their sub-folders for textures etc. are in place, but users cannot create additional folders. When they are forced to use existing folders, they will be much more careful in naming their files.
    Define versioning rules and naming conventions. Now "siginificant milestone" is a matter of view, but I at least try to create new version files for that. So if e.g in the morning I open up a comp project and change a few things in it that take more than 10 minutes to reproduce, this is significant and a new version is safed. I don't care much for simple things like adding effects - I can reproduce them in a wee in case of crashes or data loss - but complex masking, elaborate 3D modeling, dynamics simulations etc. qualify.
    Of course back up every day, at least incrementally. If following the above rules, this can be as easy as copying the project folder to an external disk.
    As for the rest - simply be hard-nosed. Your artists will whine and complain for a while, but they will get used to it and eventually see the wisdom in a regulated system. It's also up to you to brief them accordingly and remind them from time to time.
    Mylenium

  • TA21041 I can not open some folders and get not have permission to open the folder

    I can not open some folders and recieve the message: you do not have permission to open this folder. how I can solve it?

    Select that folder, choose Get Info from the File menu, and give yourself read access under Sharing & Permissions. This shouldn't be done on folders in system directories.
    (66976)

  • How do I open a .pdf file that I transferred to the ipod touch 5 using Itunes?

    How do I open a .pdf file that I transferred to the ipod touch 5 using Itunes?  It is shown in the Adobe Reader Documents window on Itunes. All help greatly appreciated!

    Is it not showing up in the documents tab when you open Adobe Reader?

  • My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer

    My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer.

    Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
    Do you have a link to that document?

  • How do i edit a PDF file that was sent to me in an email?

    How do i edit a PDF file that was sent to me in an email?

    Depends on the extent of the edits. You will need Acrobat in any case. If the edits or minor, you can use the text edit tool. For major edits, you need to request the original file be sent or see if you can Save As a DOC or related file type. PDFs are not really structured for editing and you are asking for a lot of grief if you want to do much. Exporting is the best way, or even better simply asking the author for the original (non-PDF type).

  • My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts?

    My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts? osx 10.6.8

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • How can I convert a pdf file that's larger than 100MB to word

    How can I convert a pdf file that's larger than 100MB to word?
    I have just paid $20 to Adobe to get this facility but It won't work ,
    as the pdf is larger than 100MB,
    I actually believe that I have paid twice for adobe but I'll take this up with them,
    in the meantilme,
    do you have any suggestions, I really need this material in word urgently,
    many thanks
    Shanna

    If your files are this large, ExportPDF is the wrong tool for you. You need Adobe Acrobat, which runs locally and does not need to send your files to Adobe.

  • I opened a PDFs file that was attached to an email message and now it will not close when I press "Done" as it usually does. Does anyone have a solution to suggest? Thanks.

    I opened a pdf file that was attached to an email message I received and now it will not close when I press "Done" as files usually do. Does anyone have a solution to suggest please? Thanks.

    Try double clicking your home button then force close the stuck PDF by swiping upward. Once you've done that just click the home button again to exit.

  • I am not able to open a PDF file that I just created. I get an access denied message instead.

    I am not able to open a PDF file that I just created. I get an access denied message instead.

    Thanks for asking.
    I was combining different types of files into a single PDF. Some of them were excel spreadsheets and I had set the print areas in each file. When I cleared the print area the problem stopped. So I am assuming that had something to do with it. Though I am not sure.
    The strange thing was that I was able to open the excel source documents after creating the faulty PDF but some of the MS word source documents also had "access denied" status. I still cannot figure that part out.

  • When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....

    When I try open a .pdf file my Adobe Reader 11 only allows the download / save opening the related window and don't show me both options 1) open with ... and 2) save as.... probably someone flagged the choise... always perform this way ....
    Could some one give help and let me know where I can probably find the settings option that allows me to change and switch to previous situation where it was possible to decide time to time how to proceed either opening the file or saving it ??
    Thanks in advance
    David

    What is your operating system?
    Open a PDF from where?  If online, in what browser?

  • I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine.  I updated to elements 12.1.  Now, many/most of my photos will not open because I do not have "permission" to open the files.  How do I fix this so I can work wi

    I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine.  I updated to elements 12.1.  Now, many/most of my photos will not open because I do not have "permission" to open the files.  How do I fix this so I can work with MY photos?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Every time I try to open a pdf file it says i need to accept the end user agreement

    Every time I try to open a pdf file it says I must accept the End User Agreement, so I just try to install it again and it pops up an error.

    Does it just say you have to accept the license agreement, or does it say you have to LAUNCH something (Adobe Reader, or Adobe Acrobat)? If it says this, have you done what it says? Or would you like assistance in how to launch stuff in Mac OS or Windows?

  • When I try to open some pictures in finder with preview I get a message that I do not have permission to open it.  It tells me to go to file - info.  Don't know what to do from there.

    When I try to open some pictures in finder with preview I get a message that I do not have permission to open it.  It tells me to go to file - info.  Don't know what to do from there.

    When you do Get Info for a picture, what does it say in Sharing & Permissions for your username. The Privilege should be "Read & Write"

  • After Effects error: opening movie - you do not have permission to open this file (-54)

    Hi all,
    I'm new to after effects. I have just started receiving the following error every time I try to render my movie:
    "After Effects error: opening movie - you do not have permission to open this file (-54)".
    Yesterday morning, I was able to render movies, however, after I did Apple's latest update I've started receiving the following error. What is happening is that I'm trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I've tried to repair the permissions with disk utility, but that doesn't seem to have helped.
    I've searched Google and the Adobe support forums with no luck. Please help.
    Thanks in advance for you help,
    William

    Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
    http://discussions.apple.com/thread...347251&tstart=0
    Download the right version here:
    http://www.apple.com/support/downloads/
    Panther: http://www.apple.com/support/downlo...forpanther.html
    Tiger: http://www.apple.com/support/downlo...31fortiger.html
    Leopard: http://www.apple.com/support/downlo...forleopard.html
    Install with Pacifist
    http://www.charlessoft.com/
    Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store... which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

Maybe you are looking for

  • 8500A PLUS - Scan to Email - to another 8500A Plus email address will it print with no PC?

    Wanted to know if anyone has tried using two HP Officejet Pro  8500A Plus  SCAN to EMAIL feature without the use of a PC. Anything to look out for before spending the money on two of these units? Basically i want to set one up at my office the other

  • Certification to become MCSA: Windows 7

    What certification do I need to require the title MCSA: Windows 7 (after 31th of January 2014)? Do I need to require 70-680 + 70-685 + 70-686

  • Service ordernumber  not in document flow

    Hi all, Can someone tell me how I can find the link between my invoice and the service order. When I look in the document flow I do not find the service order number. When I look in the details from invoice items I can find the service order number.

  • Variable won't attach correctly to dynamic text string

    mcWinScreen.songNameTxt.text = songName; var accuracyPercent:Number = Math.floor(((numberHit / songTotal) * 100)); var missedMath:Number = (songTotal - numberHit); trace(accuracyPercent); trace(missedMath); mcWinScreen.missedTxt.text = 'Missed:  ' +

  • Mountain Lion Download - Not completed

    I am currently running 10.7.5 on my macbook air. I recently downloaded the new version of Mountain Lion and even though it says I have the updates and the app store says I have already purchesed it - my system still shows as running 10.7.5. When I ch