How do I open a project in CS6 when it's apparently become too large (1.68 GB) to load?

I have a project that was recently sent back to me by someone who was working on the audio. When it was sent to me it was around 217 MB. After working on the project for a few more days before sending it out for color correction and additional audio work, I'm all of a sudden unable to load the project. My guess is that it has become too large to open, because now it is 1.68 GB. I don't know how that happened. I haven't applied any additional effects or brought in more media. All I've done is make trims to the picture and merged 3 sequences. I'm trying to figure out how I can open the project and, if I do need to make it smaller in order to continue working on it, is there a way to do so without losing the work that I've recently done? Thanks!

I'm trying to "import select sequences" from that project into a new project but it won't load. The loading bar is stopping about a quarter of the way through, same as it did when I recently tried to load the project normally. The loading bar has been sitting there at a quarter full for about 20 minutes now. A friend of mine tried to load the project (I sent him a zip file through Dropbox.) onto his computer yesterday and couldn't get it to open either.

Similar Messages

How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?

how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand

Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.

Final cut X-- how do you open previous projects?

i must be missing something really basic. How do you open previous projects in Final Cut X? When I try to open one it hangs on "loading (nameofproject) into time line.

You need to provide more information. Are you seeing it within the FCP interface properly when you go to show the Project Library? If so, I would click on it to select it and then open the Inspection window and click on Modify Event References and select proceed from there. I'm assuming you have not moved the project from it's proper folder....

How I can Open a Project CS5 in CS3?

How I can Open a Project that was created in After Efects CS5 in After Efects CS3?
Any Pluging that upgrade to read New Files in Older Version ?
Thans For any Information.

Ok thank for the information.
So I have the project in a Folder, you mean open and star working with one single file?
I dont have any experence in the program so you can recomend me any tutorial for newbies, I want to learn to do my own Introduction to my videos
Thank

How can I open other projects?

I want to open projects, which ı download in planetsourcecode.com in netbeans or in Sun Java Studio Enterprise 8.1.
The problem is that open dialog of JSE or netbeans looks for a directory. And if I try to open the directory which I have downloaded, it doesnt open the project. I tried to do same with my project (made in netbeans) and there was a small sign bottom of the directory icon. And it opened project succesfully. How can I open other projects?

Probably best to firstly copy the media folder - you could Option/drag it to the desktop. Then open a new project and go File/Import that desktop folder.
Let us know if that works out for you.

How do I open NEF files in CS6?

I bought the Nikon D800E and CS6 says that it can't open the RAW files. Thanks for any help!

I tried to do that and as the download progresses it stops and I get a
message to close CS6 which has to be open to get the download. Thank you!
In a message dated 4/20/2015 8:36:17 P.M. Central Daylight Time,
[email protected] writes:
How do I open NEF files in CS6?
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop for Beginners - View the full discussion
(https://forums.adobe.com/message/7456537#7456537)

How do you open a project started in Muse, Dreamweaver, or other to tweak for different screen sizes

How do you open a project started in Muse, Dreamweaver, or other design program to tweak for different screen sizes?

Hi. As of now HTML import is not plan of record for Reflow 1.0. See this FAQ for a bit more info - http://forums.adobe.com/message/5071510#5071510.
-C

When trying to edit or download a pdf document, it becomes too large or on screen or normal size with many lines of text blacked out. How do I get it to do the normal presentation of the document

For years my pdf docs downloaded for viewing or editing as normally sized documents.
Now when I pull up a pdf from file, it becomes too large or becomes normal page size but many of the lines of text are blacked out. How do I correct it to go back to the previous default page size?

Hi wh4936,
Are you opening those files in Acrobat or Reader? You can set the default page size in the Page Display preferences. Choose Acrobat/Reader > Preferences in Mac OS, or Edit > Preferences in Windows to access the preference settings. Do the black lines only appear when the PDF is zoomed in? Or are they there regardless of the page magnification?
Best,
Sara

How can I insert a number of photos in a numbers doc without the file becoming too large?

How can I insert a number of photos into a numbers doc without the file becoming too large?

Use smaller photos.
Seriously, reduce the file size of the photos in Preview, PhotoShop, iPhoto or other application before inserting tehem into the Numbers document.
Regards,
Barry

How do I split a pdf file when the file size is too large?

How do I split a pdf file when the file size is too large? Thanks!

With Adobe Acrobat. It can also optimize your document to make the size smaller.

How can you open a project file backup if the main project won't load?

This has only started happening in the last couple of weeks. I'm on Logic 10.0.7, OSX 10.8.5. On one particular project, it will be loading seemingly normally, then it just disappears with no crash log, nothing.
Presumably there is some sort of corruption in the project file.
In the old pre package days, you would just go to the project file backups folder and pick a previous one. Bingo, you have only lost a little bit of work.
Now when I show package contents, the project file backups folder has project data files that won't open logic, and are invisible until you have logic open. Which I can't do.
Rue the day I selected the package option rather than folder.
Any suggestions?
Or to put the question another way, how can I convert the project data in the project file backups folder to a file that Logic can recognise and open?

Having his install the trial is the way to go. Working between AI versions is a pain and as you are finding out almost impossible with 5 versions between the collaborators.

How can i open Jbuilder project in Eclipse

Hi All
Can anyone tell me that how can i open Jbuilder 2006 project(.jpx)
in Eclipse 3.2.2
Regards

Hello, perhaps this will be helpful : http://www-128.ibm.com/developerworks/library/os-ecidea/.
*Edit - This link will be much more useful : http://www.bleb.org/software/jpx2eclipse/
Laginimianeb
Message was edited by:
laginimaineb

Problem to open my project PREMIERE CS6

Hello,
I have a problem to open my project !
When i launch my project PREMIERE PRO CS6 say :
"this project contained an impossible sequence has to open. No file of preconfiguration of previsualisation of sequence or codec is associated with this kind of sequence"
Someone has a answer to help me ?
Thank's to your help

Try this:
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

How to delete Open/WIP Projects/Network Orders/WBSes using program PSARCHP1

Hi,
We have multiple open or WIP projects/Network orders. Program PSARCHP1 is used for this purpose. Can anybody suggest how to delete all these projects/networks that are open/WIP.
Regards,
Rakesh Kumar

I think it's not possible to remove for the data base in sap. However you can delete the records for the tables which is not suggetable. which server do you want to do this??
if developement yes you can delete the table records.
As per my experiance we should not delete the table records because it's linked many tables and diff modules in sap.
I hope it's help ful.
give the points.
Regards,
Raman

Premiere crashes as soon as i open a project. CS6 and CC both

I have Adobe Premiere Pro CS6 and CC. They have both worked for about a month, in the trial version and now they both don't. I can open premiere and it opens up fine. I can see my recent projects and open one. When I open the project I have between 2 and 60 seconds until it shuts down. If I go into manage cloud settings in the bottom left corner of Premiere CC, Premiere stays open. But only until I close the settings window and then it closes again. I get almost no error codes. While opening it sometimes says that mercury playback was used last time and does not work now due to hardware or something along those lines. CS6 gives me a Workspace.cpp-209 error sometimes. I am on Windows 7, 8GB ram, Intel(R) Core(TM) i3-2100 CPU @3.10 GHz 3.10 GHz, NVIDIA GeForce 210 Display adaptor. Please Help, I can not find anything on google.
Ps. I bought Premiere Pro CC today.

I uninstalled Adobe Premiere CC 2014, Adobe Photoshop CC 2014, Adobe Media Encoder CC 2014, and i tried to uninstall Adobe creative cloud. For some reason it said uninstalled with errors. I also uninstalled the whole CS6 suite. Now I reinstalled Adobe Creative Cloud, Premiere Pro CC, And Adobe Media Encoder. Premiere Pro and Media Encoder installed with errors again. Here is what I got, basically saying that Microsoft Visual C++ couldnt install.
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1601
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\INDIVI~1\AppData\Local\Temp\{813E01FB-8172-4290-AC83-299714F0CFC6}\PremierePro_ 8_LS20\Adobe Premiere Pro CC 2014\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
Since there wheere 0 fatal errors i tried premiere. Nope, no change.
So I did what the text told me to. I tried to manually install them. That didn't work because the windows installer service was not running. I made that service start up and then manually installed all the Visuall C++ that it told me to. After successfully installing them all I restarted and tried Premiere Pro again. Still the same thing happened. I am very much out off ideas now, but i hope i gave you the info that can help, and maybe i overdid the info.

How do I open a project in CS6 when it's apparently become too large (1.68 GB) to load?

Similar Messages

Maybe you are looking for