How do I open docuements as landscape within the browser?

Is there an Open Parameter that will rotate the document, so it will be landscape, not portrait?  Or just a way to simulate right clicking + Rotate Clockwise when it loads with your plug-in on a web page?
I was given over 1400 sideways documents to work with, and I'd rather not leave it up to my users to manually turn every single one that they want to look at.
These are all single page PDF documents, I may have no chioice but to set up a batch job to open, rotate and save all of them, in all the folders... but I am hoping there is a simpler solution that I can drop into my web page code.
Thanks,
~Ocean Spray

You need some javascript for Acrobat to batch process your 1400 or so documents and I would have thought they should know this.  However, try any of the these two links:
For Acrobat scripting
<http://forums.adobe.com/community/acrobat/acrobat_scripting?view=discussions>
For web server side scripting:
<http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions>
This particular forum is about Web Design and I doubt if anybody here will tell you about batch processing of your documents.  You need scripts that can run in the browser or in the document itself. 
Personally, I think you will need to edit and save the document manually but people like David Powers (our community professional and moderator of these forums) will tell you more about this.

Similar Messages

  • How does thunderbird open a http-link within a browser?

    I often get mails with http-links. On my previous system I could click on the link and the browser window opened showing the web page.
    If I click on a link on my thunderbird nothing happens. I am sure it is possible to configure thunderbird to open http-links in the default browser on the system. However I have not found the possibility to configure thunderbird in that way.
    Can anybody give me a hint on how to do it?
    Thanks.

    i d'ont use it since long now but it has always been a poor trick in a lost config confile, not possible from the gui itself.
    wiki/google/forum search will sure give it to you.
    http://wiki.archlinux.org/index.php/Get … to_Firefox
    oh..seems it's possible from thunderbird itself..so easy..
    this is totally unbelievable, how could the devs let that like this..oh moz devs of course, not ours
    otherwise i've discover clawsmail a few weeks ago, very good, at least for me, and kmail when i was a kde addict

  • How do I open documents created in apple works that will no longer open?

    How can I open documents created in appleworks that will no longer open now that I have pages?

    If you have the Apple iWork '09 suite installed, you can open pure AppleWorks word processing, spreadsheet, or presentations in Pages, Numbers, and Keynote respectively. You can not open AppleWorks documents in Pages v5, Numbers v3, or Keynote v6.
    If you do not have the above iWork '09 suite, then download the free LibreOffice suite. Drag and drop your AppleWorks documents on the LibreOffice icon, and it will sort out what will open them. Note: LibreOffice will pause shortly after it takes you to an optional donation page — before continuing the download. Everything installs under /Applications/LibreOffice.

  • How do I open documents in already in ibooks with Reader?

    How do I open documents already in ibooks in Reader?

    You realize that Adobe Reader doesn't read EPUB files (most of what iBooks does), right? It only reads PDF files.
    If you have a PDF already that in iBooks, you'll have to get it out of iTunes on your Mac or Windows computer. iBooks doesn't allow sharing with other PDF/EPUB readers.
    Follow the instructions in this document about using iTunes (the section called Personal Computer thru iTunes). You'll need to export the PDF to your computer, then re-import it using the instructions into Adobe Reader.
    iBooks is not a good sharing citizen!

  • FireFox 3.6 and Adobe Reader X. Reader X PDFs opened within the browser contain links, which do not work. Anyone got clues on why the links fail and how to fix?

    When we rolled out ReaderX and AcrobatX we uncheck the Diaply PDF in Browser window. OK with IE, but ignored in FireFox (3.6.16). We can live with that except the PDFs have links to other URLs and clicking on them is ignored. Same PDF opened outside the browser the links work fine. FireFox with Reader 9.4.0 no problem. Reader X with IE no problem. I can fix the Display in Browser with a change to firefox.js, but have not figured out how to fix the links when the PDF is displayed within the browser.

    My replies are in Bold.
    Thank you for your response and message.
    1. Are you seeing this problem with all kinds of PDF's or some specific  kinds like secure PDF's (with doc open password or printing  restrcitions), reader extended PDF's or PDF forms.
    This problem is with all kind's of PDF's.
    2. Are you opening a locally saved PDF by doing a drag drop in the  browser or right click and open with IE/FF or directly opening a PDF  hosted on the internet?
    It doesn't matter. However I do it, I see this problem in Firefox, IE & Google Chrome.
    3.  Can you also check the version of the Reader X browser plugin? you  could find it at C:\Program Files\Common  Files\Adobe\Acrobat\ActiveX\AcroPDF.dll. Right click -> Properties  -> Details
    If version is 9.0.x then you could try a clean install of Reader X.
    I have checked it. It's the latest plug-in (though at the moment, I have gone back to Adobe Reader 9.4.1, as I've mentioned before, because I need the reader to be working fine for my work and daily life. I am just waiting for a fix before I try Adobe Reader X again.
    As I've mentioned before, I am seeing this issue ONLY on my Windows 7 Ultimate (Laptop). In the desktop's at work, with Windows XP / Vista, I don't see it. Adobe Reader is working fine, browser integration is fine, the floating tool bar works fine, the right click menu pop' up where the right click is done...I can also save PDF' from the main toolbar at the top and so on...
    I really have run out of ideas.... and I am very surprised that no expert support personnel (if at all there is one) have dropped by or said anything or mentioned anything about this.
    Anyway.... Cheers.

  • IWorks has disappeared. How can I open documents saved as Word 97 from Pages stored on Dropbox?

    iWorks has disappeared.  How can I open document saved as Word 97 through Pages stored on Dropbox?

    Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
    I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5)

  • FF 3.6.6+ will only open documents within the browser

    When a website has a link that points to a document (any type, not just pdf), clicking the link results in the document being opened within FF as opposed to getting a dialog window asking "what to do".
    I've checked the options/applications and there are no settings in there for microsoft documents. There was one for adobe which was defaulted to something like "open within FF"
    == This happened ==
    Every time Firefox opened
    == Upgraded to 3.6.6

    Thanks but this doesn't address my problem.
    in the "managing file types" link the 3rd step is:
    "The Applications panel will display. Select the type of file for which you want to change the default action. (Note that multiple entries may exist for the same file extension, one for each MIME type.)"
    The problem is that none of the file types I'm having the problem with exist in this list. Lets use a specific example: microsoft word. Word is not in the application list so I am unable to make any changes to the "default" behavior.
    Additionally, if I left-click on the link then it immediately opens it embedded w/in the browser...no option to do otherwise.
    If I right-click & save as, it asks me where I want to save it and properly identifies it as a word document

  • How do I open documents that are grayed out?

    How do I open documents that are grayed out?

    Do these files have a file extension (e.g. .dmg, .jpg, etc.)?
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • How does Media Manager handle Motion Projects within the Sequence being cop

    How does Media Manager handle Motion Projects within the Sequence being copied?
    I've highlighted my sequence, opened Media Manager, and copied it to another drive. When I open up the sequence in it's new project, the rendered Motion Project plays within my sequence but it won't let me go back into this Motion Project to make changes. I tried starting over. This time I highlighted the actual motion sequence and clip that is created within FCP after sending something to Motion and copied those to the new drive. When I went into the newly created 'media' folder and double clicked on the motion project it launched. It looked liked it was going to play but while my crops moves and borders were there, the filmed material is shown as a freeze frame for the duration of the motion project.
    I did this with and without 'including master clips within selection'. Any advice would be appreciated. Thanks.

    Is there anyone who knows the answer to this? Thanks.

  • How to maintain open change request control for the transaction MM02 & CS02

    hi all...
    can any one please let me know that, is there any BADI or Enhancement spot
    where i can code for my desired functionality...
    how to maintain open change request control for the transaction MM02 and CS02.
    Desired Functionality:
    • The user wants to maintain a material, bill of material or a document.
    • On the initial screen of the respective transaction (MM02, CS02)
      user enters a change request number.
    • The system checks whether the object record that the user wants to maintain
      is already assigned to other change request numbers.
    • If this is the case, the system displays a warning, stating that there are
      other open change requests for this master data record.
    • In addition, the system lists the relevant change request numbers.
    • The user can continue the maintenance or leave the transaction and first check
      the mentioned change requests.

    hi satish thanks for reverting back
    but sorry yaar given enhancement is not triggering...
    but my requirement is:
    - after executing the transaction MM02 & CS02.
    - user inputs the data for Material Number and then he enters the Change Number.
    - if the given Change Number is not maintained with the Material (i dont no
      where/how this two fields are maintained internally), then it has to raise a
      warning and it should list the existing Change Numbers for that perticular
      Material.

  • How easy is it to create a new add on? I would like to see tabbed display within the browser on FF24 on Android 4.2 – as per desktop FF

    Please excuse this if it's a noob Q – I am, indeed, completely new to Android. Tabbed display appears to have been possible on previous versions of FF for Android via several add ons but unfortunately no more. Display of each open tab within the browser – rather than the current arrangement with just the number in the corner – is still possible with FF desktop and also features in Chrome, Opera and Dolphin for Android. I would prefer not to use these other mobile browsers as FF outperforms them but I do need tabbed display to allow for PDF docs to open – using the PDF viewer add on – alongside their initiating webpage. Any ideas? Is it difficult to create an add on? What is the process? Is one in the pipeline? Many thanks in advance for any help or guidance you can offer...

    Many thanks for your reply, Waka – guess you're right that it's a new add on or bust... I still find it odd that such a common UI feature across mobile browsers is unavailable in FF24 either as an option under settings or as an add-on. Surely, I'm not the only person who finds this puzzling?

  • How can I start a new paragraph within the same table cell?

    In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)?  I'd like to enter a mini-list of several items of various lengths of data.

    While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
    With that box unchecked, Shift Return types a soft return (new line without a paragraph break).

  • How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work". can anyone help

    How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work".
    Anyone can help?

    Right click on any folder in mail and select Create new mailbox.

  • UWL Help - How can i create my own task within the Enterprise Portal

    Dear all,
    I am currently working with UWL .
    I have tried the customization and those stuffs associated with UWL , and it is working properly.
    My current issue is , how can create my own task within the Portal ( not using Ad Hoc  Workflow , which is present in Portal) ?.
    If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
    Is there any API regarding  UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
    How can i add that custom task in the drop down ?.
    I have tried the customization of existing UWL.
    I shall be grateful to those who can help me to solve this issue with links regarding the  solution of my problem's.
    with regards
    Kishor Gopinathan

    Hi Kishore,
    I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
    Thanks
    Vijay

  • Display Document Set Columns Within The Document Set

    Hello all! Hopefully you all can let me know if the idea I have in my head is possible:
    Background: I have a Document Library with a custom made Document Set that has about 15 columns. The way I initially designed this, I left about 10 of the fields as "Hidden" because we didn't want the user to fill out that information
    when creating a Document Set. That information would be completed in the next step through a Workflow. The Document Set Welcome Page has been left pretty much untouched with the usual web parts for Document Set Properties and the view of the items within the
    Document Set.
    Question: What I would like to know is...would it be possible to display those Document Set fields within the Document Set itself? At the moment, if I try to add another Document Library web part and view it, the information web part is
    empty, or it contains information about one of the items within the Document Set.
    Simplified Structure of Document Set:
    Name (required)
    Fiscal Year (Required)
    Total Cost (Required)
    Approval Date (Hidden)
    Requisition # (Hidden)
    Team Members (Hidden)
    Reminder Date (Hidden)
    User creates a new Document Set, fills out the information, and saves (this triggers a background workflow that approves the Document Set). After approval, a new workflow is started to provide the information for the Hidden fields (and also schedules a reminder
    for that Reminder date.)
    The goal would be to display those Hidden fields in another web part on the page. Right now, I have users going back up to the main level of the Document Library to look at a view that contains those fields.
    Hopefully I haven't confused you all too much! Please let me know if my idea is possible and any resources you might have!
    Thanks!
    Toni
    Toni Marie

    Here is the approach to read document set columns and assign to other webparts:
    for each document set you can find the id when you clicking on the document set or navigating to the welcome page,
    using this id read query string and  the associated item column values and assign to otherwebpart .
    Reference code:
    //page_load for other webpart read the query string of welcome page
    if (Page.Request.QueryString["ID"] != null)
                    ID = Convert.ToInt32(Page.Request.QueryString["ID"]);
                    if (itemID > 0)
                        GetDocumentSetItem(ID , site);
      protected void GetDocumentSetItem(int itemid, SPSite sSiteUrl)
                SPSite site = sSiteUrl;
                SPWeb web = site.OpenWeb();
                SPList list = web.Lists.TryGetList("DocumentlibraryName"); //where documentset content type attached
                SPListItemCollection items = list.GetItems();
                SPListItem item = null;
                if (itemid > 0)
                    item = list.Items.GetItemById(itemID);//getting the current item
       //read the document set item column values and assign it other webpart controls , 
                    txtDocsetidname.Text = Convert.ToString(item["FileLeafRef"]);
                    txtDocsetid.Text = Convert.ToString(item["hiddenfield"]);
    In the welcome page I have placed button to load webpart ,while loading the webpart I am reading the query string assigning the values to otherwebparts.
    G1

Maybe you are looking for