How do I open my flash drive I've loaded as a 'disk'- shows up, but no open

I can't get my flash drive to open through the USB port on my Extreme. It is set up and recognized by Extreme, but how do I access the files. Maybe I don't have it set up correctly.

Thank you for replying. Malcolm (above) managed to provide the exact solution I was looking for at the same time as you were typing your reply, judging from the time.
I'm accessing the QS from my MacBook Pro (OS X 10.5), using a wired/wireless connection - the QS is wired, the MBPro wireless. At the moment they are about twelve inches apart, and I do have a keyboard to plug into the QS, but I'm hoping to set it up as a headless unit to take time lapse photos (using an iSight) and a clever script available here: http://gawker.sourceforge.net/Gawker.html
Once set up, I hope to access the QS remotely, as it will live in Birmingham, and I live in Bristol! So thinking as far ahead as possible, I wanted to set it up to be controlled as much as possible by me, even if my caretaker in Birmingham has to put a disc in the tray from time to time.
Again, many thanks!
kind regards
Andrew McDermott

Similar Messages

How to install (using usb flash drive) os x snow leopard on 10.5?

i have a version 10.5 (leopard), but i would like to install snow leopard (10.6). i tried using bootable usb flash drive using the "utility drive". However, it did not quite work as i expected. Does anyone know how to use bootable usb flash drive to install snow leopard on leopard?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Leopard installer DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Insert the USB flash drive.
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager screen appears.
Select the icon of the USB flash drive and click on the arrow button below the icon.
When the installer finishes loading follow the onscreen instructions.

How can I use a flash drive on IMac?

How can I use a flash drive on my IMac? I can't open or send files to it.

Des it show up in Disk Utility? If it does, then you have to format it as Mac OS Extended *jounaled) so that you can write to it.
Please also let us know what model iMac you have.

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?

How to Create a Bootable Flash Drive to do a clean install of Lion. I have tried to use the InstallESD.dmg but it still will not do a clean install so that I do not have to do a reinstall from the Recovery (That just re downloads and takes over 6 hours)?
The system I'm have is a Mac-mini that had SL on it and no SuperDrive. I have also call Apple Support and they have really have not been to much help over 1st did my up grade to Lion and Installed the Lion Server.... it lost my SSL that I paid for and kill almost on of my server setting, plus kill all my web servers (using apache vhosts), and not to say the LDAP will even let remote users login to your laptops.
PS: There is no way that I'm going to buy a Install USB from Apple... They have over billed me over $300.00 because the Apps Store still has bugs (Glad I did not write that App/Service)
If there is anyone that can give in the information to create a USB install stick, I would be very thinkful.

Here you are bro, courtesy of "softpedia.com"....brilliant site!!!
If you ever had problems with your Mac OS X installation you know that the first thing you should do is to check the startup volume using Disk Utility.
After the check has ended and, if the errors exceed a certain level of seriousness, the Disk Utility application will require you to restart your Mac and use its Mac OS X Install disc counterpart.
Other users may have to reinstall OS X altogether, but will find, or already know, that their SuperDrive (a CD/DVD reader and write combo drive) is not functioning properly and it will not be able to read the Install disc.
Although this might happen to Mac OS X Leopard users due to faultyhardware, the vast majority of problematic SuperDrives will be encountered inside Snow Leopard running Macs.
This is due to the updated SuperDrive firmware included in either the Install disc or the software updates one has to install to reach the latest version of OS X, namely 10.6.6.
This can be fixed by flashing the SuperDrive’s stock firmware using free command line tools that one can find for free online (I will write about this process also, but at a later time because this article only focuses on allowing you to create your own alternative USB boot disc).
If you are reading this last bit of information with skepticism, than you should know that it happened to me too. Despite all my tries to make it work properly, the SuperDrive kept on munching any inserted DVDs and just popped them out in about twenty seconds.
The workaround to this issue was to create my own Leopard bootable USB memory stick. I am not suggesting a Snow Leopard bootable stick mainly because there are lots of users that have decided to buy the cheaper, Upgrade version, which I have not tested and, therefore, I’m not sure if it will work properly once written to a USB disk.
And now, here are the exact steps you should follow in order to obtain a fully bootable Leopard (or Lion) Install disc.
Step 1 (If you already have the Leopard install disc DMG file you can skip to Step 2)
Launch Disk Utility (you can find it inside /Applications/Utilities). Here select the Leopard Install disc in the list of drives on the left and click on the New Image menu entry at the top of the window. A save message will appear where you will have to select the Desktop as a destination.
Step 2
After Disk Utility has finished creating the Leopard DMG, insert your USB stick and erase all data and reformat the disk. To do this select the USB in the list of drives on the left and, after clicking on the Erase tab on the right side of the window, choose the Mac OS Extended (Journaled) format and click the Erase button beneath.
Step 3
After the USB has been reformatted, download the SuperDuper app from HERE and launch it. Once SuperDuper starts, you will only have to select the DMG in the Copy drop-down menu, your USB memory stick on the right and hit the “Copy Now” button.
One can also use Disk Utility for this task but creating a bootable USB stick failed 2 out 4 times when copying the DMG to the stick (with the exact same settings each time). Creating the bootable stick using SuperDuper proved to be the perfect way to do it because it worked each of the 4 times I tested it.
The steps above can also be used to create a bootable Mac OS X Lion USB by using the InstallESD.dmg image you can find inside the Lion installer (named “Install Mac OS X Lion.app”) downloaded from the Mac App Store in the /Applications folder.
To locate the InstallESD.dmg right click the Lion installer, select the “Show Package Contents” entry, go inside the “Contents” folder, and from there into the “SharedSupport” folder. Inside this folder you can find the InstallESD.dmg you can use to create your own bootable Mac OS X Lion USB stick. To do so, go to the third step described above and use the InstallESD.dmg as the DMG to be copied to your USB disc.
That’s it! Once the process ends you will have a fully bootable Leopard (or Lion) USB disk that you can use as an alternative to the Apple’s DVD Install disc that comes bundled with all Macs.
To use your newly created bootable disk you will have to restart the Mac, press and hold the OPTION key until the StartupManager appears. Here, select the Mac OS X Install disk using your keyboard arrows and press return to start from the selected drive.

How do I see the flash drive?

I have a flash drive plugged into the computer. I see its icon in the Sidebar. But it would be more convenient if I could see its icon on the Desktop. How do I get the flash drive to appear on the Desktop?

Finder -> Preferences -> General. Checkmark to show external disks. That should do it.
Regards.

How to boot from USB flash drive - Portege R500

Hi,
I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
Any help would be really appreciated

Hi
As far as I know it should be possible to boot from USB FDD
Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
Generally you could try to press F12 button when notebook powers up.
Then a boot menu should appear on the display and you should see all bootable devices.
PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
Greets

How to make a bootable flash drive Disk Utility's "Owners Enabled" function

Being as Apple does not have a discussion group for this wonderful little utility and because Apple has neglected to fix the "Post New Topic" link in the "Special Interest Area>User Tips Library", I have no choice but to post here. I think what I found is useful and I have accomplished it in a way that avoids the need of using the disheartening Terminal.
How to create a bootable flash drive:
Step 1: Obtain a flash drive (e.g., 8GB USB flash SanDisk), OS cd

and because Apple has neglected to fix the "Post New Topic" link in the "Special Interest Area>User Tips Library", I have no choice but to post here.
http://discussions.apple.com/message.jspa?messageID=10672620#10672620

How Do You Test a Flash Drive for Errors Using OS X?

HI. In Windows there are Flash Drive tester that tests if there's something wrong with the Flash drive's chips. How do you test a flash drive for errors on OS X? I bought the HP v220w which is tiny for a 16GB and it's metal. The whole thing goes into the plug. Design wise, it is great, it's very elegant like a jewelry. Thanks in advance.
Gbu.

Format it for OS X and run a surface scan on the partition. That should show any hardware problems that don't keep it from working altogether.

How do I back my flash drive on iCloud?

How do I back my flash drive on iCloud?

You can only back up iOS devices on iCloud.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

Do other USB devices work on your MBP?
Does this USB stick work on other MBPs?
There is a possibility that the stick requires more power than the MBP delivers. Try it on a powered hub.
Ciao.

HOW TO YOU ADD USB FLASH DRIVE TO BOOT OPTION

i HAVE TWO LAPTOPS SAME MODEL NUMBER ONE CRASHED, hp SUPPORT TALKED ME THROUGH F11 TO RECOVER TO FACTORY CONDITION THE LAPTOP STOP AT 100% WITHN1 MINUTE LEFT TO CMPLETE. HP TOLD ME TO ESCAPE AN DO F2 TO CHECK THE HARD DRIVE. THAT WORK IT SHOWED ALL THE CHECKS PASSED. IT TOOK 2 + HOURS SO WHEN i CALLED BACK DIFFERENT PERSON SAID $350 SEND IT THEY WILL FIX. iT'S NOT IN WARRANY SINCE FEB2014 i ONLY PAID $399 FOR IT, CANNOT AFFORD THAT. SO HP TECH SAID USE SECOND PC TO MAKE A FLASH DRIVE . (I MADE CD'S WHEN I FIRST GOT IT BUT THEY DID NOT WORK). SO GOT A FLASH DRIVE WTH 32GIGS (I THOUGHT SHE SAID I NEEDED AT LEAST 20 GIGS) COPIED THE RECOVERY PROGRAM, NOW THE USB WILL NOT OPEN. FROM AN EARLIER WRITTER HE WAS TOLD TO F10 BIOS, ESC LOOP FOR BOOT OPTIONS TO SEE IF USB FLASH DRIVE IS THERE. MY PROBLEM ITS NOT ON MY PC SO HOW DO I ADD IT SO THE USB WILL OPEN.
RIGHT NOW PC IN A LOOP WHEN POWERED ON HP AND TIME COMES UP, LITTLE WHILW A BLOCK WITH HP/DAT/TIME COMES UP AND A CMD ON BOTTOM OF SCREEN, IT GOES BY TOO FAST T CLICK ON IT AND GOES BACK TO HP LOGO. IF I COULD ADD USB FLASH AS AN OPTION IT MIGHT MAKE IT OPEN ANY HELP APPRECIATED.

The flash drive is not going to show up if it is not bootable. To make a bootable Recovery on flash you have to use Recovery Manager just like you do to create cd/dvd Recovery.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to download data to flash drive in USB port

this seems like it would be a simple basic thing to do....

How is the flash drive formatted? What disk format is required by your synthesizer? I'm thinking you probably need to use a PC format - NTFS or FAT. OS X cannot write to an NTFS formatted drive, but it can write to one formatted FAT (MSDOS.) If you can use the latter, then you need to format the flash drive. This is not straight-forward on the Mac as it would be on a PC.
Put the flash drive in a USB port on your Mac and open Disk Utility in your Utilities folder.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list.Click on the Partition tab in the Disk Utility main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS. Click on the Apply button and wait until the process has completed.
4. Check the status and be sure it shows Format type: as MSDOS. If not, then repeat Steps 2 and 3.
Try the flash drive now.

How do I format a flash drive to fat32

I need to reformat a flash drive to FAT32 and do not know how to do this. I am new to the OS environment, I just recently swithed from Windows to Macs

Flash drives normally are Fat32,
Open Disk Utility (Applications>Utilities), insert the Flash drive and select it. Go to the Erase Tab, set the format as MSDOS (FAT) and erase the drive.
If there is anything on this drive it will be erased.

How to remove document from Flash drive after printing from a PC

Hi All,
Here's my problem: Today I needed to print an MS Word file at a printshop, so I saved the document onto my Flash drive and took it to the shop. There, the staff printed the document from a PC and handed the drive back to me.
Now, back at home, I want to delete this document from the Flash Drive. I plug in the drive, select the document and drag it to the trash. But then I get this message: " The operation cannot be completed because you do not have sufficient privileges for document X".
This is a document I created from scratch, so I should have read/write privileges, yet the document on the drive is Read Only.
I went back to the shop, and they get the same message.
If I try to use disk utility to erase the disk, it appears as an MS-DOS FIle System (FAT 16) disk, and the erase buttons are "greyed out".
How can I erase this document? Or how I can I reformat the drive?
Any help much appreciated!~
12 iBook G4,1.2 GHz, 768 RAM Mac OS X (10.4.7)

I think I just solved my own problem. Just tried pressing the option and command keys at the same time while dragging the document into the trash and now it's gone. For good, I hope....Phew!
12 iBook G4,1.2 GHz, 768 RAM Mac OS X (10.4.7)

How do I open my flash drive I've loaded as a 'disk'- shows up, but no open

Similar Messages

Maybe you are looking for