How do I  open photo files from Sony A7 and Nikon 7000?

I am currently using CS5 Extended but can not open files from Sony A7 camera I just bought. Do I need to upgrade to CS6 where I can use camera raw 8.3 ?
With CS6 can I still open files from my Nikon 7000 in format of DNG? Please advise.
YAYAFORMPC

The Nikon needs ACR 6.3 (which needs CS6 or CC) but I can't see the Sony on this list
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Either I missed it, or it's a new camera that is not yet supported.

Similar Messages

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • How do I move photo files from computer to ipad 3?  Sync is dimmed.

    How do I move photo files from computer to ipad 3?  Sync is dimmed.

    Could this be what you are experiencing?
    http://ipadhelp.com/ipad-help/sync-apply-buttons-grayed-out-in-itunes-over-capac ity/

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

    How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC?  When I try to open a Raw file I get a message 'wrong type of file'

    I believe you need ACR 7.1 which PSE10 cannot be updated to. 
    Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
    You can also buy a newer version of PSE.  Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
    The DNG Converter can be found on this page:  http://www.adobe.com/downloads/updates
    PSE12 Trial: http://www.adobe.com/downloads.html

  • How do I open RAW files from the Nikon D4s in photoshop?

    How do I open RAW files from the Nikon D4s in Photoshop? I have the updated newest version.

    The Nikon D4S is a brand new camera which has just been added by Adobe to Camera Raw 8.4.
    http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
    8.4 has not yet been finally released but you can download and install a pre-release copy for CS6 and CC (it is not compatible with CS5 and earlier)
    CS6:http://labs.adobe.com/technologies/cameraraw8-4/
    CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/

  • How do I transfer photo files from iphoto back onto my SD card?

    How do I transfer photo files from iphoto back onto my SD card?

    Export the photos to a desktop folder and drag that folder to the SD card
    LN

  • Is there a way to open Excell file from the server and display in the UI and save it back on to the

    Hello there,
    Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

    Hi Mike,
    Welcome you to the forum.
    You may try:
    SELECT * FROM MyDBNameHere.dbo.OUSR T0
    Thanks,
    Gordon

  • How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?

    How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?
    In the past I would simply place a copy of the document on my scanner, then selected create PDF from scanner.  However, there is now no create PDF from scanner alternative, option or choice.  The only option available is selected file to convert to PDF.  what am I to do?

    That would have been a function of your scanning software. Adobe Reader is only used to view the pdf that your scanning software created.

  • How do I open raw files from my Canon 6D in Photoshop CS5.1?

    Just tried to open raw files from my Canon 6D in Photoshop CS5.1. An error message appeared: "
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information." Is there a simple solution?

    You cannot, nor will you ever be able to open your Canon raw files directly in CS5.1.  Your camera model requires at least ACR 7.3 which only works with CS6, or Lightroom 4.3.  There will be no further updates for CS 5.1 ever.
    Your choices are (1) to upgrade to CS6, or (2) to download the latest version of the Adobe DNG Converter, currently 7.4, and convert your Canon raw files to raw DNG files that you can then open in your CS5.1.
    You should also know that the rendering in ACR 7.4 is far superior tou the raw conversion in ACR 6.x, so you would be leaving a lot of image quality on the table if you go the (free) DNG Conversion route.

  • How do I open pdf file from web? Opening pdf docs from hard drive works fine.

    Hello,
      I am unable to open pdf files from the web.  Documents on my hard drive open fine.  My computer gives me 2 error messages when I try to open web-based documents.  Thanks.

    Why did you post so many informations about operating system, web browser, Adobe Reader version, and the error messages?

  • Opening arw files from Sony SLT a33 in PSE 9

    Hi All,
    I'm trying to edit photos from my newly purchased Sony SLT a33 but Camera Raw kept coming up with "wrong file type" error messages.  When I tried to open up arw files from my Sony a350 it works fine.
    The only way so far for me to edit my Sony raw file from the SLT a33 is to open it up using the free Sony software, save it as jpeg/Tiff and then exporting it to PSE.  I would like to do it all using the PSE.
    I've searched for updates but there seem to only be a 'patch' for Lightroom and CS.
    Any light on this subject would be very helpful indeed.
    Many thanks in advance!
    Cheers,
    catraz84

    Thank you very much for your help so far.
    I've downloaded the patch as linked by Casey, extracted and ran it.  It showed a bar while updating it with camera Makers etc and it ran smoothly.  I then followed up with 99jon suggestiong and it is still showing up as Camera Raw 6.1.
    I tried opening the newer Arw file and it's still coming up with the "wrong file type" error.  Opening older Arw file pops up in Camera Raw 6.1.
    Any further suggestions regarding this issue?  :'(
    Kind regards

  • How do I open library file from another application?

    I'm trying to upload a picture from my IPhoto library to the internet. When the internet program asks me to name a file, I browse my "Pictures" folder. And I see the iphoto library there, but it is not available to select. I need to be able to select an individual photo file.
    I've worked around this by first copying the file from the library to my desktop, but that's cumbersome and shouldn't be necessary.
    How can I do this?
    Thanks,

    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • How do I transfer photo files from desktop to ipad without 3rd party software?

    how do I transfer photo and music files from my laptop to ipad2 without purchasing a 3rd party software?

    You can use iTunes which is free (http://www.apple.com/itunes) - and that is the only way to sync music from a computer to the iPad
    Syncing photos via iTunes : http://support.apple.com/kb/HT4236 . You need to sync all photos that you want on the iPad together in one go, as only the most recent remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad

  • How can I open encrypted files from a flash drive?

    I moved transferred files from my work PC to a flash drive and had to encrypt them using Credant.  I know the password but can't find a way to decrypt the files on my mac...

    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

Maybe you are looking for

  • IPhone 5S 32GB Logic Board Repair

    So several months ago I attempted to repair the cracked screen on my black 32 gb iphone 5S on my own. It did not work out. I ended up breaking the logic board and now the phone is basically unusable. I've been using my iPhone 4S for the past few mont

  • Error -- No Such Trigger('when-button-pressed')

    Hi, I am getting the error ""No Such Trigger('when-button-pressed')"", when I am executing the code EXECUTE_TRIGGER( 'WHEN-BUTTON-PRESSED' ); on some item(Key-Next-Item), although WHEN-BUTTON-PRESSED trigger exists. What could be the problem ?. It wo

  • How Do I Get My Old Themes Back?

    I had to wipe my hard drive and reinstall my Operating System and Applications including iLife06. But all I have are the recent 6.0 iDVD themes. Anyone know how I can get the 5.0 and 4.0 versions back?

  • Drop down box in a modulepool

    Hi, I am creating a modulepool with a drop down box in one of the dynpros. I have managed to fill it with values using the 'VRM_SET_VALUES' function module. The problem comes when running the modulepoool. The field displays the drop down box with the

  • Error when run form on Oracle Application Server

    Hi al I'm using Webutil Library to create browse button to open dialog box When i run form in my computer,it run success and i can upload file do database and application server But i upload form to Oracle application server and compile it no error (