How do I open raw files from my Canon 6D in Photoshop CS5.1?

Just tried to open raw files from my Canon 6D in Photoshop CS5.1. An error message appeared: "
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information." Is there a simple solution?

You cannot, nor will you ever be able to open your Canon raw files directly in CS5.1.  Your camera model requires at least ACR 7.3 which only works with CS6, or Lightroom 4.3.  There will be no further updates for CS 5.1 ever.
Your choices are (1) to upgrade to CS6, or (2) to download the latest version of the Adobe DNG Converter, currently 7.4, and convert your Canon raw files to raw DNG files that you can then open in your CS5.1.
You should also know that the rendering in ACR 7.4 is far superior tou the raw conversion in ACR 6.x, so you would be leaving a lot of image quality on the table if you go the (free) DNG Conversion route.

Similar Messages

  • How do I open RAW files from the Nikon D4s in photoshop?

    How do I open RAW files from the Nikon D4s in Photoshop? I have the updated newest version.

    The Nikon D4S is a brand new camera which has just been added by Adobe to Camera Raw 8.4.
    http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
    8.4 has not yet been finally released but you can download and install a pre-release copy for CS6 and CC (it is not compatible with CS5 and earlier)
    CS6:http://labs.adobe.com/technologies/cameraraw8-4/
    CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • Can't open RAW files from a Canon 70D

    Can't open RAW files from a Canon 70D with Photoshop Elements 12.  Is there an upgrade / download available.  Current RAW plug in is version 8.0.0.137

    What operating system are you using?
    The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
    Have you tried Help>Updates from within the pse 12 editor?

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • How do I upgrade elements 10 to open raw files from my Canon 70d?

    How do I upgrade elements 10 to open raw files from my canon 70d?

    Normally, if there are any updates for your version of PSE then they should be offered to you automatically.  However, you can also check if there are any new updates by going to:
    Help >> Updates
    If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market.  We are currently at version 13 so version 10 was stopped long time ago.  However, you can see a workaround at this link where I posted a video to get things moving:
    <Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
    Hope this helps.

  • How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

    How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC?  When I try to open a Raw file I get a message 'wrong type of file'

    I believe you need ACR 7.1 which PSE10 cannot be updated to. 
    Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
    You can also buy a newer version of PSE.  Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
    The DNG Converter can be found on this page:  http://www.adobe.com/downloads/updates
    PSE12 Trial: http://www.adobe.com/downloads.html

  • How can I upload raw files from my canon g7x to lightroom5

    How can I upload raw files from my canon g7x to lightroom

    See this thread in the official Adobe feedback forum: Why doesn't my version of Photoshop or Lightroom support my camera?

  • Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

    Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

    Yes, I see:
    Letzte Aktualisierung
    16.04.2012
    The link I gave is listed in the faqs of this forum.
    Photoshop Elements FAQ List
    mfG
    Michel

  • Bridge won't open raw files from my canon mark iii

    Bridge won't open raw files from my canon mark iii?  Are you kidding adobe? This camera has been out for over six months. Why isn't it loaded into the program? This camera is sooo main stream!

    What Mark III?
    Are you referring to the Canon EOS 1D Mark III or the Canon EOS 5D Mark III?
    And what version of Adobe software are you referring to?
    There definitely is support for the EOS 1D Mark III in in versions of the Creative Suite dating back several versions. Support for the EOS 5D Mark III was made available in an update to Creative Suite 6 and Lightroom 4.x.
              - Dov

  • How do I edit Raw files from a Canon 5D using Elements 9?

    How do I edit Raw files from a Canon 5D mark 111 using Elements 9?

    The 5D mk III is supported in PSE 10 with ACR 6.7 update.
    You could download and install the latest DNG converter and use that to convert the CR2 files to DNG files (still RAW format). Then you can edit the DNG files using PSE 9.
    Brian

  • How can I import Raw files from a canon eos 6d?

    How can I import RAW files from a Canon Eos 6D into aperture?

    Doesn;t look like the 6d is supported yet. I'm surprised, thought it would have  been in the latest update, 4.02.
    In the meantime you can shot RAW+JPG and use the JPG's now and then switch to the RAW's once it is supported or else you an convert the RAWs to DNG using Adobe's converter and import the DNGs.
    While I can't say for sure  Canon cameras are usually supported fairly quickly so hopefully you won't have to much longer to wait.
    regards
    And in the meantime let Apple now you want this see Aperture->Provide Aperture Feedback

  • Not able to open raw files from my CAnon 5D mark III in PS CS6!

    I have camera raw 8.6 installed and am running photoshop cs 6.0.  All of a suddened photoshop will not open raw pictures that were shot on a CAnon 5D mark III.  Any ideas on what could be the problem.  The pictures do open in light room.
    Thanks
    Bruce

    What exactly happens when you try to open raw files from Canon 5D Mark III in PS CS6. Do you get any error message? An error screenshot would help.
    Make sure your PS CS6 is up-to-date from Help > Updates.
    Restart the machine and retry.
    ~ Arpit

  • Will Lightroom 5 open RAW files from a Canon EOS 70 D

    I Have a Canon EOS 70D elements 10 will not open RAW files from this camera will Lightroom 5 open these without having to use another program such as adobe DNG converter ?

    Have a look here: Camera Raw plug-in | Supported cameras
    Since Lightroom v5.2

  • How do I open raw files taken with Canon 70D.  Not supported in Elements 12.  Is there a download?  Thanks.

    How do I open raw files taken with a Canon 70D?  Elements 12.  Version 8.0 Windows 7 64 bit.  Thanks in advance for any help.
    JWT
    Lamar, CO

    Thank you so much for you quick answer.  Works fine, now.  Thanks again, Barbara.
    JWT

Maybe you are looking for

  • XML - Making use of Parsed Contents

    Hi all, i would like to know how i can make use of XML data - gotten from a URL as a data stream- which i parsed using the SAX parser.... code looks something like this: DefaultHandler handler = new indexParser(); SAXParser saxParser = SAXParserFacto

  • Preventing Server Timeout on a Socket

    I have been questioning my solution to preventing server timeout and was wondering if anyone knows of a better way to do it. I am using a socket to connect to a ftp server which times out the connection after 3 minutes of inactivity. I have tried usi

  • SEM-CPM  Cockpit  problem with tachomter chart: only one pointer shown

    Hello I'm using the CPM - cockpit design transaction , UMC_CPM_MEAS, to configure a cockpit frame with a TACHOMETER graph. When I use just one data series   and compare current period vs previous period for example, I get a correct graph presentation

  • Static members and inheritence

    class A {    public static int x = 111; class B extends A {     public static int x = 222;     void foo(A a) { System.out.println(a.x); } ...If I call "foo(new B());" it prints "111". How to change A/B or foo() so that such call will print "222", wit

  • Simple query (i can not get logic...help me)

    I have 2 tables with equal fields. Table: A Table: B No Name No Name 1 Raju 1 Raju 2 Rani 2 Rani 3 Giri 5 Vasu 4 Venu (3 rows) 5 Vasu (5 rows) I need Output will be from Table A only. No Name Flag 1 Raju True 2 Rani True 3 Giri False 4 Venu False 5 V