How do I open RAW Nikon D600 files on PS Elements 9?

I've just bought a Nikon D600 but I can't open the raw files in PS Elements 9, what do I need to do, thanking you in advance for your help, David

You have two alternatives:
(1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Similar Messages

  • CS6 can't open Raw Nikon D4 files

    I cannot open Raw files from my Nikon D4 in CS6 beta but I can in CS5 as it updated Camera Raw recently for it to work with the D4. Can I update CS6 for it to open Nikon D4 Raw files ?

    Hello, ACR 7 and ACR 6.7 and Lightroom 4 do not support the same cameras, it was done to get the products out of the door as soon as possible.
    But you can use the DNG converter 6.7 on the files to be able to open them in ACR 7 in CS6 beta. see: http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightroom-and-camera-raw.ht ml
    Also, it is a good moment to remind @Nikon_USA or @Nikon_Photo that they should support DNG in their cameras.
    They are using useful engineering time in all raw converters teams, and even have to update their own converter at the release of each camera!
    And if they are concerned with trade secrets, there is always private maker notes for that!

  • Opening raw nikon 5200 files

    What plug in do i need to open Nikon 5200 raw files in cs5?

    There's no direct support for your camera in CS5.
    It would require ACR 7.3 or higher, which only work with CS6.
    You can download and run the free Adobe DNG Converter 7.4 to convert your raw Canon files to raw DNGs which you can then open in CS5.

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • How do I open RAW files from the Nikon D4s in photoshop?

    How do I open RAW files from the Nikon D4s in Photoshop? I have the updated newest version.

    The Nikon D4S is a brand new camera which has just been added by Adobe to Camera Raw 8.4.
    http://labs.adobe.com/technologies/cameraraw8-4/?tabID=details#tabTop
    8.4 has not yet been finally released but you can download and install a pre-release copy for CS6 and CC (it is not compatible with CS5 and earlier)
    CS6:http://labs.adobe.com/technologies/cameraraw8-4/
    CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/

  • How can i open a raw nikon D300s file in photoshop 7.0.1? [was: rescueranch]

    How can i open a raw nikon D300s file in photoshop 7.0.1?

    The D300s was first supported in Camera Raw 5.5
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw 5.5 is only compatible with Photoshop CS4 and later
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your options:
    Join the Cloud, or
    Buy CS6, or
    Convert the Raw files from the D300s to DNGs using Adobe's free DNG converter
    http://www.adobe.com/products/photoshop/extend.displayTab2.html
    Then edit the DNGs in Photoshop 7.0.1

  • I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    Try installing it manually from:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Regards,
    Ashutosh

  • How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    You can't directly but can use DNG Converter to convert your files so ACR can read and process them.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • How do I open RAW images from T1-XMG CR2?  Adobe DNG converter will not recognize these files.   HELP?

    How do I open RAW images with T1-XMG CR2? I have adobe DNG converter but it will not recognize these images.  I have had no problem with converting other images.  and ACR will not recognize them either.  Help!@

    The screenshot did come through once I added the period between dropbox and com, making URL:
    https://www.dropbox.com/s/o7q829t2n3uuuqg/screenshot%202014-07-01%2012.36.28.png
    The screenshot shows the first raw file is named T1-XMG_3306.CR2 which probably corresponds to a normal raw filename of IMG_3306.CR2.  It is not clear where this name came from.  I guess it is possible that you’ve entered in a renaming template in LR’s Import panel that replaces the initial I or _ with T1-XM and so the files are renamed. 
    What I have asked for is not a screenshot of your filenames, but one of the CR2 files, itself, which you can upload to dropbox and post a link to.  You should use copy/paste to get the link into a message, rather than typing it in, if at all possible.
    This is because it was my understanding that these oddly-named CR2 files don’t work, and I wanted to look more closely at them to see if they were recognizable as some other type of file.
    Do you have a raw file named IMG_3306.CR2 that these files correspond to?

  • How do I open raw files from a Panasonic DMC-GF5 using Elements10 on a PC?

    How do I open RAW files from a Panasonic DMC-GF5 camera using Elements 10 on my PC?  When I try to open a Raw file I get a message 'wrong type of file'

    I believe you need ACR 7.1 which PSE10 cannot be updated to. 
    Use the DNG Converter to make DNGs from the RAW files and those should open in your older PSE version.
    You can also buy a newer version of PSE.  Perhaps do a Trial (Try) of PSE12 and see if PSE13 comes out in the next week or so.
    The DNG Converter can be found on this page:  http://www.adobe.com/downloads/updates
    PSE12 Trial: http://www.adobe.com/downloads.html

  • How do I open raw files taken with Canon 70D.  Not supported in Elements 12.  Is there a download?  Thanks.

    How do I open raw files taken with a Canon 70D?  Elements 12.  Version 8.0 Windows 7 64 bit.  Thanks in advance for any help.
    JWT
    Lamar, CO

    Thank you so much for you quick answer.  Works fine, now.  Thanks again, Barbara.
    JWT

  • How can I open RAW files with PSE 12 from Olympus o-md e-m 10?

    How cam I open RAW files ? I use PSE 12, the Olympus om-d em 10 and windows 7.

    Photoshop Elements 12 should be able to recognise raw files from the OM-D E-M10.
    Check which camera raw you currently have by loading the editor, going to the Help menu and selecting About plug-in -> Camera Raw
    If it not at version 8.5 then go to the Help menu and select Updates
    Brian

  • How do I tether my Nikon D600 to Lightroom on my Mac Book Pro?

    how do I tether my Nikon D600 to Lightroom on my Mac Book Pro?

    Joanne Read wrote:
    how do I tether my Nikon D600 to Lightroom on my Mac Book Pro?
    Even though Adobe is dragging their feet offering support ... you are in luck since you are using an OS X product ... you don't have to wait until Adobe thinks it's time to offer you a solution ... you can tether with your D600 right now and it won't cost you a one cent ... because Apple added tethering support back in October 2012 ...
    It's slightly convoluted though.
    On you Macbook Pro there is an app installed by default called Image Capture. Start Image Capture, plug your camera into the laptop with the USB cord. Thurn on the camera. Then from the Menu go to: File>Take Picture ... this will open a dialog box that you can designate a folder to save your images. Then point Lightroom to that folder in "watched folder" mode and you are in business ... takes a touch longer to see your results in Lightroom than if you were tethering directly ... but you can get the job done.
    Keep in mind you can't trigger the camera or adjust settings from within Lightroom ... but you can see you results and begin work on your images very quickly ...

  • Opening RAW or NEF Files

    Hello, I am new to PSE (v.9,PC), but my first challenge is:
    WHY, when I open a RAW File, the Camera Raw File Editor opens (I think that's what it's called) with the file/pic prior to opening the file/pic in the full Elements program?
    I do like and want the ability to "adjust" the WB or EXP or.....   whatever, but the problem I am having is that the RAW file, when opened in the CRFE(?) is all WASHED OUT when compared to the identical Jpeg (Fine) file???
    When I look atr the thumbnail through the Editor, it appears to be the same pic, but when it is opened, and the CRFE opens, it seems CRFE is "imparting change/s) to the pic.
    Has my "custom" modifications been changed, to reflect an effect to be added to all RAW files, or ??????
    All I want to do is to be able to open a RAW File, without any modifiactions, and save it as a Jpeg file, and hopefully without any changes.
    Please Help, I will be forever GRATEFUL - Dave Reider

    I really do thank you for your patience and persistence.
    However; I can comprehend "the concept" of what you are describing with the two different file types "seeing" something slightly different from one another, so WHY then, do both Jpeg and Raw files look EXACTLY the same when opened up in Capture NX??????
    The only difference that I can see, is that in Capture NX, it doesn't launch a Camera Raw Editor, which is where this Dummy's money is betting on as the culprit.
    Also, to your point, I have seen other similar issues posted qith both Nikon and Canon, with some indicating Jpeg was better over Raw (as in my case) and for others it was the Raw which was superior.
    Thanks again, and I hope you all Have a Safe and Happy Thanksgiving!!!
    Dave 
    Date: Wed, 24 Nov 2010 19:02:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Opening RAW or NEF Files
    As I said earlier, there is no "right" view of your photo. The JPG is changed from what the sensor saw, the RAW is changed from what the sensor saw; they are just changed diffferently from one another.
    Those are the facts of life in digital photography.
    Most people would say RAW is the smart way to go, but RAWs usually require more work to get a pleasing result. So there are tradeoffs ... RAW can give you higher quality results than JPG if you edit the photos properly; but JPGs are usually less work.
    >

Maybe you are looking for

  • My ipod isn't recognized by any computer

    I've bought a ipod nano nd generation one week ago. When i first came home, i could connected it to my computer, it charged and sync. It play music and works all right but... 3 days later, when i wanted to recharged and change the music list, it wasn

  • Loop keeping second animation on hold

    hello every one i have an animation loop which triggers another animation. The problem is the loop is on hold while the animation it triggered is completed. I wish some one could give me some examples on how loops could trigger other animations. Swap

  • How can I get a HOT mix on Output 1-2 without clipping?

    Hello, I'm unable to get a hot mix on Output 1-2 with either AU instruments or Audio tracks. If I start with a hot track, by the time I add EQ and compression, the tracks are clipping. I've tried reducing the gain on the plug-ins, and/or the gain on

  • Lazy Line Painter in Edge Animate

    Hello, I'm trying to achieve something pretty simple, but it's not working for now... I would like to trace a SVG dynamically, by code. To do that, I used Lazy Line Painter, which seamed to be pretty easy to use. So I made my SVG, imported it to Lazy

  • Changing x axis range in charts

    I have a line chart where the last entry on x axis is the "now" function. It will not display today's date as last category Any help