How do I open the 3D rendering settings panel in PS CS6?

Hi all;
Pls have a look here:
http://helpx.adobe.com/nl/photoshop/using/3d-panel-settings-photoshop-extended.html
Its the lower panel I mean, where the tools are found that in CS5 were in the toolbox.
Thanks
Maarten

MWVanThiel wrote:
I suddenly found out that my links arn't working.
No idea, cause its correct.
Let me just show a pic:
The one marked red, that is the panel I am in vain looking for.
Thanks,
Maarten
Hoi Maarten and everyone here,
Ik volg je vraag-verhaal heel goed vanaf het begin.
Dat je in CS6 op de 3D elementen moet klikken voor verschillende eigenschappen is mij duidelijk.
Toch mis ik nog steeds de Quality settings. Ik kan alleen "render" vinden in de tabs.
Waar is het menuutje "Interactive , Ray traced Draft en Ray traced Final" in de render settings gebleven in CS6?
English:  Where is the menu of Render Settings : Quality --> "Interactive , Ray traced Draft and Ray traced Final" in CS6?
Thanks,
Dana

Similar Messages

  • How Can I open the aspx pop up panel and Where is my tamper data plugin ?

    I use Firefox/3.6.12 and Windows7 Ultimate 32 bit - I cant open my admin pop up aspx panel. I have same problem about fckeditor. I try to close this page only one page. Firefox is asking (save this page) namely not more pages and I close but firefox is in the proccess. I think pop up seems open in firefox but I cant see. The other problem ; Tamper data plugin lost after updated from my tools menu. Thanks for everything

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    How can I set the default print settings of my document as color.  I want the default print setting to be color when someone opens a document.  similar to duplex print preset is there a color print preset?

    Hi,
    Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
    Next try changing the settings by selecting the saved preset.
    That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

  • HT204053 how do i open the icloud

    how do i open the icloud? i am trying to do a backup on my iphone

    Go to "Settings > iCloud", add your account, scroll down, click on "Storage & Backup", turn on iCloud backup and create a new backup.

  • How do I adjust the local storage settings

    I have FP installed but does not show up as an installed program. I want to adjust local storage settings but instructions  adobe gives me do not make sense. Where do I find application to open and adjust settings ?

    Excuse me for being stupid but how do I get to "Website Storage Settings Panel" page
    Date: Fri, 19 Apr 2013 04:51:18 -0700
    From: [email protected]
    To: [email protected]
    Subject: how do I adjust the local storage settings
        Re: how do I adjust the local storage settings
        created by Sunil_Bhaskaran in Installing Flash Player - View the full discussion
    The following link has some useful instructions: http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.htm l#main_7__Disable_Flash_Player_hardware_acceleration Thanks,Sunil
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5250355#5250355
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5250355#5250355
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5250355#5250355. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Installing Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

    As the title suggests...
    I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer.  (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding  only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time. 
    How do I do that on an AEBS?
    In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines? 
    TL,DR version:  How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.  

    You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

  • How can I open the EP login page in the same pop-up window?

    is it possible for me to using / only one window(Browser) pop-up to EP Page(Login or iView...).
    In the firs general html page I create a EP login page link action[eg. "window.open('url', 'target_name')"],
    but always launching new pop-up window(Browser).
    How can I open the EP login page in the only one window(pop-up)?
    Could anybody help me by giving suggestion and codding?
    Thanks,
    jin.

    Hi,
    if you want to redirect the root of portal system (http://portal/) to the login page, edit the
    file and change the body tag as follow:
    \usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\index.html
    <body onload="location.replace('irj/portal' + document.location.search)"></body>

  • How can i open the archived pst file in my Mac Air

    How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

    System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
    the documentation for JDK1.3.1 that I'm currently
    using.Look more closely. There is indeed a setProperty(String, String) in
    http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
    "Since 1.2"
    - Marcus

  • I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to

    I made a bootable disc on an external hard drive, with Yosemite on it.  I am running Snow Leopard on my iMac.  How can I open the Yosemite disc from the desktop on my iMac?  Does the external hard drive need to be connected to my iMac by firewire to do that?

    kahjot wrote:
    Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
    Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

  • How do I delete the factory app settings on my iPod Touch?

    How do I delete the factory app settings on my iPod Touch? For instance: I don't want the app "Stocks" to appear on my screen any more. Is there a way to delete/hide it?

    The built in Apps can't be deleted, but they can be moved to an unused screen. You could create a folder of all unused Apps and move it.
    Stedman

  • How do you open the DVD tray on a K430 without using Windows Explorer?

    How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door.  Am I missing something?  Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk?  Please help. Thanks. 
    Solved!
    Go to Solution.

    hi penguin247,
    Regarding your questions:
    1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
    Link to picture
    2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How do I open the updates window in "Adobe Application Manager"?

    How do I open the updates window in "Adobe Application Manager"? Or can I or should I....??
    I am a brand new Cloud member.  I heard of the Retina update.  Assuming this was where the updates would logically appear I went to the "Adobe Application Manager" app first.  Without closing the "Adobe Application Manager" I opened Photoshop and went to the help menu and selected "Updates..."; a second window opened in the already open "Adobe Application Manager".
    I selected update all.
    The result is below:
    DW CS6 12.1 Creative Cloud
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Dreamweaver CS6 12.0.1 update to address critical issues
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop 13.1 for Creative Cloud
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe InDesign CS6 8.0.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Bridge CS6 5.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Illustrator CS6 Update (version 16.2.0)
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    DPS Desktop Tools CS6 2.05.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Dynamic Link Media Server CS6 1.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop Camera Raw 7.2
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Extension Manager 6.0.4 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Adobe Media Encoder CS6 6.0.2 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Now, I closed the "Adobe Application Manager" and opened "Photoshop" again and again selected "Updates..." from the help menu.  The "Adobe Application Manager" opened again with just one window this time and the updates happened correctly.
    I was hoping one of the updates would be to the "Adobe Application Manager", I don't think so.
    So, If I were you I wouldn't select "Updates..." from an Adobe app unless the "Adobe Application Manager" is closed until they fix it...
    Current version: Adobe® Application Manager - Version 7.0.0.128 (7.0.0.128) Note the Two windows in the "Adobe Application Manager" in the attached image.

    The updates are currently available by going to Help>Updates within the Application.  Once you invoke the Updater, which is a component of the Adobe Application Manager, it will locate and apply the updates.  It looks like most of your updates have failed to install.  I would recommend you begin by trying to apply the updates that are available on our product update page at http://www.adobe.com/downloads/updates/ and seeing if you face the same difficulty.
    If you continue to experience problems with applying the updates then please review your installation log to determine the cause of the failure.  You can find details on how to locate and interpret the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

    I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

    I had the same problem.
    Try this.
    https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

  • I just registered a domain name. I would like to publish an iWeb site to own server. How do I get the FTP server settings?

    I just registered a domain name. I would like to publish an iWeb site to own Mac Mini server. How do I get the FTP server settings?

    reference:
    http://www.macinstruct.com/node/152
    http://www.macminiserver.com/
    http://www.macdrifter.com/2011/04/more-dropbox-fun-ftp-access/

  • When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

    When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

    You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
    You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites.  You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway.  Find this file and you can alter your website.
    Use a spotlight search to try and find it and if this does not work you can download something called Find Any File.  If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published.

Maybe you are looking for