How Do I Open The Excel Spreadsheet And Modify The Cell Data

How can I change the cell content in specific excel spreadsheet with ActiveX control? I am using LabVIEW7.1

you can open the excel file using Active X . The procedur to open the excel file, will get in the examples. There is an ready made Vi. for that.
Then select the properties Cell in active X, and you can change the cell data by doing some modification in that vi. i hope it will help you.

Similar Messages

How do I read from a text file that is longer than 65536 lines and write the data to an Excel spreadsheet and have the data write to a new column once the 65536 cells are filled in a column?

I have data that is in basic generic text file format that needs to be converted into Excel spreadsheet format. The data is much longer than 65536 lines, and in my code I haven't been able to figure out how to carry over the data into the next column. Currently the conversion is done manually and generates an Excel file that has a total of 30-40 full columns of data. Any suggestions would be greatly appreciated.
Thanks,
Darrick
Solved!
Go to Solution.

No need to use nested For loops. No need for any loop anyway. You just have to use a reshape array function. The picture below shows how to proceed.
However, there may be an issue if your element number is not a multiple of the number of columns : zero value elements will be added at the end of the last column in the generated 2D array. Now the issue depends on the way you intend store the data in the Excel spreadsheet : you could convert the data as strings, replace the last zero values with empty strings, and write the whole 2D array to a file (with the .xls extension ) using the write to spreadsheet function. Only one (minimal) problem : define the number of decimal digits to be used;
or you could write the numeric array directly to a true Excel spreadsheet, using either the NI report generation tools or ActiveX commands, then replace the last elements with empty strings.
We need more input from you to decide how to solve these last questions.
Message Edité par chilly charly le 01-13-2009 09:29 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_VI.png ‏10 KB

I was experiencing an issue with an app, I deleted, re-installed, and now the app is downloading brand new. All of my progress is lost. In itunes it says the app was created and modified the day i tried uninstalling. Im at a loss, any suggestions?

I have tried all of the support tips, and am now trying to contact the developers of the app. I am a little frustrated because I have been playing about a year. So when I open the app after I deleted it I start out brand new. So I started a new ID and I looked up my old app ID and I can see the progress of my previous game before the delete but there is no possible way for me to play the app under that ID now. From all the forums I have read this is impossible because you are not supposed to be able to reset the app from one device. TaDa! Leave it to me to be the only one. I am in limbo waiting on the app developers to get back with me. Who knows how long that will be... Not sure if I am making any sense because I have never had this happen before.

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can I get any of the search requests to open in a new tab and not the current window. I have just downloaded the new FF8

In my previous version of FF, whenever I did a search with any search engine the results opened in a new tab. Now with FF8 the results open in the current window which really is inconvenient. How do I get the search results to open in a new tab instead?
I have Windows xp FF8

To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
Use the Filter at the top of the page to locate this pref: browser.search.openintab
If the value of the browser.search.openintab pref is false then toggle the value to true with a double click on that line.
See also http://kb.mozillazine.org/about:config

How can i open my iphone if i dont know the apple id and password

how can i open my iphone if i dont know the apple id and password

Hey Bergiexxx,
Thanks for using Apple Support Communities.
If you are having trouble getting into the iPhone follow this article.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/ht1212
If you are having trouble getting into your account follow this article.
If you forgot your Apple ID password
http://support.apple.com/kb/ht5787
Have a nice day,
Mario

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process. Thanks

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process for my IPAd

I don't even know what it is, but have you explored the support available from the developer? http://www.roambi.com/iphone-videos.html

How do you open a quicktime e-mail attachment on the iphone

How do you open a quicktime e-mail attachment on the iphone

A QuickTime attachment must be in an iPhone compatible format. Not all QuickTime files can be viewed on the iPhone. Look at this app:
http://itunes.apple.com/us/app/oplayer/id344784375?mt=8

Want to open a new browser window and display the html file in locale disk.

Hi,
I want to open a new browser window and display the html file in local drive. The below html applet work in local system successfully. But i deploy the same in web server (Tomcat) and try the same in client machine it does not work. Please help.
Note:
The class below fileopen.FileOpen.class i make it as a jar and put it in jre\ext folder at the client machine.
------------------------------------FileOpen.html(Tomcat)-----------------------------------------------------
<html>
<body >
<applet code="OpenFile.class" archive="loadfile.jar" width="100" height="100">
<param name="path" value="file://c:/open.html" />
</applet>
</body>
</html>
-------------OpenFile.java in server(Tomcat)--------------------------------------------
public class OpenFile extends Applet implements ActionListener{
String path = "";
fileopen.FileOpen open = null;
Button b = null;
public void init(){
path = getParameter("path");
b = new Button("Open");
b.addActionListener(this);
add(b);
public void actionPerformed(ActionEvent ae){
try
open = new fileopen.FileOpen(this,path);
catch (Exception e){
e.printStackTrace();
-------------------------------------------FileOpen.java /Client JRE/ext----------------------------------------------------
package fileopen;
public class FileOpen
AppletContext context = null;
URL url = null;
public FileOpen(Applet applet,String path)
try
if(null != applet){
context = applet.getAppletContext();
if (null != path)
url = new URL(path);
context.showDocument(url, "_blank");
}catch(Exception ex)
ex.printStackTrace();
Please help to solve this issue very urgent.
Thanks in advance.
By,
Saravanan.K.

zzsara wrote:
I want to open a new browser window and display the html file in local drive. ...Did you ever pause to consider how ridiculous that is?
The best audience for applets is people off the internet. 'People off the internet' might be using a computer that has no (what was it?) 'open.html' in the root of the C: drive. In fact (shock horror) they may not even be running Windows, and would therefore probably have no 'C:' drive at all.
If you do not intend to distribute this to people off the web, an application makes a lot more sense, but even then, you cannot rely on the document being there unless you 'put it there' (during installation, for instance).
As the other poster intimated, applets can load documents off the local disk as long as they are trusted. Here is an example*, but note that it is not so rash as to presume any particular path or file, and instead leaves it to the user to choose the document to display.
* The short code can be seen at SDNShare on the [Defensive Loading of Trusted Applets|http://sdnshare.sun.com/view.jsp?id=2315] post.
On the other hand, a sandboxed applet can load any document coming from its own server via URL, or get showDocument(URL) to work. In that case, the JRE must recognize that the URL is from its own server, so the best way to form URLs for applet use is via the URL constructor
new URL(getDocumentBase(), "path/to/open.html");That is how I form the URL in this [ sandboxed example of formatting source|http://pscode.org/fmt/sbx.html?url=/jh%2FHelpSetter.java&col=2&fnt=2&tab=2&ln=0]. Of course, in this case the applet loads the document, then parses the text to draw the formatted version, but the point is that an URL produced this way will work with showDocument(URL).
I am pretty sure showDocument() in an applet off the internet will work with an URL pointing to a foreign (not its own) server, but it will not be able to load documents off the end user's local disks.
I suggest a couple of things.
- Try to express this problem in terms of what feature it is that you want to offer the end user. Your question jumps directly to a bad strategy for achieving ..who knows what? An example of a feature is "Shows the applet 'help' files on pressing F1".
- A good way to indicate interest in a solution is to offer [Duke stars|http://wikis.sun.com/display/SunForums/Duke+Stars+Program+Overview] to match that interest.
Edit 1:
..and please figure out how to use the CODE tags.
Edited by: AndrewThompson64 on Sep 12, 2008 11:14 PM

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

How do I create an Lightroom HTML Gallery and preserve the - in the file name?

How do I create an Lightroom HTML Gallery and preserve the - in the file name?
The hyphen (-) is more search engine friendly, so I label all my photos using hyphens (-) to separate the keywords in the file name
Here's a sample file name - it's for the "Guess Where Berkeley" flickr site
guess-where-berkeley-serkes-xx-s-curve.jpg
I created a Lightroom HTML Gallery and posted it to the following link.
http://www.berkeleyhomes.com/tests/lightroom/lightroom-test-1/
Though it looksl like the HML gallery shows the original file name in the web page, it looks like Adobe Lightroom modified each photo's file name by changing the - (hyphen) to an underscore (_)
Originally
guess-where-berkeley-serkes-xx-s-curve.jpg
After Adobe created the HTML photo gallery the name became
guess_where_berkeley_serkes_xx_s_curve.jpg
Is there any way to preserve the – rather than the _ character
Thank you!
Ira Serkes

InDesign's interactive PDF support is a small subset of what you can do in Acrobat Profesional.
I think you probably want to create a button (or change an existing button) in Acrobat Pro that causes Acrobat to close the document -- that should be analagous to "exitting the CD." I assume your autorun file is opening the PDF in Adobe Reader? You have not included it and are not specific, so it is tough to say.
I believe in Acrobat Javascript you can close the document with this.closeDoc(). You'll probaly need to ask on the Acrobat forums (possiby Acrobat Scripting) for more detail.

How to get the list of database Views modifying the DB tools list tables.vi

Hi,
I have a problem, I just started using LabVIEW and in particular the LabVIEW connectivity toolkit and I am lookig fgor suggestion regarding how to get the list of database Views modifying the DB tools list tables.vi...
Thanks in advance,
Michela

Hi Michela,
since the VI you want to modify is part of a Toolkit, I suggest you to copy the whole block diagram in a new VI and then save it in a new location.
Place the DB List Tables.vi on a block diagram, double click on it and go to the tab "Window -> Show Block Diagram "
Select "Edit -> Select All" to select the whole block diagram and select "Edit -> Copy"
Open a new VI and select "Edit -> Paste"
Save the new VI
In this way you can modify everything you want without overwriting the Toolkits VIs.
Hope this can help.
Regards,
Andrea N.
Systems Engineer ATE & RF - Mediterranean Region
National Instruments Italy

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Thank you so much for responding. I will look for the other disks.
One more question - I initially decided to do this because my Mac kept opening with the date changed to 2008, and I keep having to re - enter my Web key. In addition, it was running much slower. Since I 'cleaned' everything out, I thought all would work perfect. This morning, the date changed to 2008; again AND it again asks for my Web key. Does this mean my Mac has reached it's almost end or could I have a 'bug' on it?
Again, thanks so much for your suggestions.

You have too many sessions open. Please close one and execute the workitem.

Hi all,
I am new to Portal.
we have a SAP Inbox Iview that works fine, but the problem is when the user try to execute Purchase Requicition Approval, the error "You have too many sessions open. Please close one and execute the workitem." appears. What really bothers me is that the error appears as IE error message but the detail of the error looks like SAP.
Your help will be appreciated.

wanda89 wrote:
Most started out with 200-250 limits and now are at 1,000 or more in less than a year.Well, as noted, store cards can be a building tool and as I understand it you have been in that process for about a year and congrats on your progress. That said, I would not be applying for any additional store cards if there is not a specific need for it. This is not the type of credit you want in your profile in the long run. With regard to closing them: I don't know how this will affect your UTIL as I am not aware of your other cards limits however there are many people that have closed these types of cards when they determined there was no use for them, they were not needed any more, they were not the type/quality of cards they wanted to have in the long run, and lastly the history of that card would remain on their report for 10 years. Some bare bones info and the affects of closing cards: http://ficoforums.myfico.com/t5/Credit-Cards/Closing-Credit-Cards/td-p/347190 All that said, while the above lists the math of it all, if you will, it does not speak to the aspect of quality. As you continue to grow, how do you want your profile to look to lenders? Do you want to have 10 low quality store cards won by the credit card trick with limits in the 1k range that you may never use and can't really use substantially anyway as your UTIL would go through the roof very quickly with a 1k limit or do you want a lower number of high quality cards with healthy limits that will continue to grow overtime if you show them the respect they deserve?

How Do I Open The Excel Spreadshee​t And Modify The Cell Data

Similar Messages

Maybe you are looking for

How Do I Open The Excel Spreadsheet And Modify The Cell Data