How do I open the Navigator tab?

It's a fairly straightforward question. I'm a noob with the program but have some experience in Photoshop, and a quick search landed me here, and about halfway down the page(just ctrl+f "Navigator") there is a screengrab showing a Navigator tab. My installation of Flash CS6 does not have this, however, nor does it show up under "Window." I would really like to know where this is.

No, as in the "Navigator" tab, as showed here:

Similar Messages

  • How can I open the Create tab?

    I want to make a greeting card following the instructions of the book "Adobe Photoshop Elements 8 Classroom in a Book", using the CD enclosed in the book. I follow the instructions from page 140 of that book, but when I click the purple Create tab above the Panel Bin, the image of the frames doesn`t open in the Edit pane. So, the Purple Create tab doesn`t open any image or tab in any part of the screen. It doesn`t work at all. I try again with my own pictures, but the result was the same. My computer is an iMac with Mac OSX (v10.6), and my Browser is Safari.
    Many thanks for the help.
    Hector.

    Have you turned off the panel bin? First try doing a Reset Panels. If that doesn't do it, quit PSE, then go to library>application support>adobe>Photoshop Elements>8.0>locale>en_US (will be different if you aren't in the US) and delete mediadatabase.db3. (Note that this the library at the top level of your hard drive, not your username>library or system>library).
    When you restart PSE don't do anything until you see the icons in the effects panel--give it time to rebuild everything.

  • When I open a new tab, how can I get the second tab to be me my home page also?

    I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

    I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

  • When I start Firefox 4 two tabs open one is my homepage and the other is "google toolbar updated", how can i stop the second tab opening?

    I have google toolbar installed on my Firefox 4, whenever I start firefox two tabs open, one is my homepage gmail and the other is "google toolbar updated".
    How can I stop the second tab from opening?

    See these articles for some suggestions:
    * [[Firefox has just updated tab shows each time you start Firefox]]
    * [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • How can I make "Open Link in New Tab" open the new tab in the same window, not a different window?

    When I Ctrl-click a link and choose "Open Link in New Tab" it chooses to open the new tab in a different window (one that's already open) rather than opening the new tab in the same window. Even though the other window is minimized, it automatically gets restored and placed on top of the window I was in. This interferes with my context, forcing me to minimize the window again to get back to the one I was in before. I want the new tab to open in the same window, so I can still see the tab I was in. Some links seem to have the "Open Link in New Tab" behavior automatically, so I never know when I'm going to get thrown out of my current window. Very annoying.

    If you have a mouse with a scroll button then try to middle click the link to open the link in a new tab.
    It is also possible that the links use onclick JavaScript instead of a href to specify the action.
    See also:
    * http://kb.mozillazine.org/browser.link.open_newwindow.restriction
    * http://kb.mozillazine.org/browser.link.open_newwindow

  • How do i get the old tab switching behavior back?

    I installed Firefox 8 today to give it another try after a pretty bad experience of switching from FF 3.6 to FF 4.0.
    Right now, i've dealt with most of the inconveniences of the switch, but there is one thing i don't get.
    What happened to the tab navigation behavior? I mean, i used to be able to switch tabs from left to right with Ctrl+Tab and from right to left with Ctrl+Shift+Tab. And it was perfect for me.
    Now Ctrl+Tab is opening some sort of a preview window, and Ctrl+Shift+Tab opens the All Tabs list.
    How could i get the previous behavior back? I'm too used to it to change myself simply because somebody came up with a new way that he thought would suit better.
    Thanks.

    Found the answer by myself, thanks to the [https://support.mozilla.com/en-US/questions/851489 other post here] . Looks like Control Tab Preview got itself enabled for some reason...

  • How can I specify the default tab in a CHM Output?

    My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
    I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
    So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

    Hi there
    This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
    Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How do i open a new tab similar to using ctrl+k in ie?

    how do i open a new tab similar to using ctrl+k in ie?

    Try Ctrl+t
    Most of the shortcuts should be listed on the full menus. To display the classic menu bar, tap the Alt key or press F10.
    Oops, sorry, Ctrl+k duplicates the current tab. To do that in Firefox, click in the URL of the page and press Alt+Enter.
    There also might be an add-on that creates a more convenient method.

  • I have a problem when I open the new tab?

    I have a problem when I open the new tab. Normaly, I open the new tab as click mouse in button near to last page. " new tab" appear with untitled page. But now , It always appear with web sites wich I don't like. So, How can i repare this problem ?

    This feature is likely to have been added by an extension. Check the settings for your extensions to see if they show this feature.
    Another method of identifying the extension that is causing this is to disable extensions, for details on this process see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do I set the blank tab (+) to go to my home page instead of blank page when opend?

    How do I set the blank tab (+) to go to my home page instead of blank page when opened?

    You can do that by using an add-on such as [https://addons.mozilla.org/firefox/addon/2221/ NewTabURL] or [https://addons.mozilla.org/firefox/addon/777/ New Tab Homepage].

  • How do I open a new tab from address line?

    How do I open a new tab from address line?

    You Will have to hold down the Alt key and press Enter to make the link open in a new tab without using an extension.
    By default links always open in the same tab.
    You can search the Add-ons website for an extension if you want to change this default behavior.

  • Does not open the application tab

    does not open the application tab
    http://adobe.ly/1h3Ng0c
    How resolve???

    Hello SnNick,
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    Make sure that you unhide the hidden files of your computer or else you will not fir "AppData" folder.
    Do let me knew if it worked or not.
    Regards,
    Ratandeep Arora

  • Why+does+firefox+open+the+following+tab+file%3A%2F%2F%2FC%3A%2FUsers%2FTom%2FAppData%2FLocal%2FTemp%2Frpc.html

    why+does+firefox+open+the+following+tab+file%3A%2F%2F%2FC%3A%2FUsers%2FTom%2FAppData%2FLocal%2FTemp%2Frpc.html

    Just delete that file in the temp folder and cleanup that folder.
    *file:///C:/Users/Tom/AppData/Local/Temp/rpc.html
    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

  • How can i open the left side of the G4?

    Hello!
    Have G4 that is starting to sound like an aeroplane. I opened the four screws on the left side of teh computer but it still hangs on to the apple so I can not get the side off. I tried to pull a little but i is stuck.
    How do I open the side after i have removed the screws?
    There are a lot of dust bunnies/rats etc.
    Thanks in advance
    Per-Anders

    There is a plastic stand-off, that's attached to the (inside) center of the side panels. When pressed into place, two tabs snap-lock the panel securely to the chassis. For the left side, removal of the internal fan assembly will provide access to these two tabs. Gently squeeze them together, and the panel will be released. To avoid breakage, don't use excessive force on them. The right panel requires removal of the logic board, to access the catch/release tabs.

  • How do I get the close tab x to be on the tab?

    Every time I want to close a tab I have to bring up the tab list. How do I get the close tab x to be on the actual tab?

    I don't think there is a built-in setting for that. The one used on desktop versions of Firefox has no effect in the Android version (browser.tabs.closeButtons).
    The easiest workaround I could find was the Quick Gestures extension. One of the many actions for which you can define a gesture is to close the current tab. By default, the gesture is Down Right Up, which didn't seem to work for me. I changed it to Left Right Left and that does work.
    If you haven't installed any add-on in Firefox for Android before:
    menu > Tools > Add-ons > Browse all Firefox add-ons
    Here you can search for gestures
    After installing, return to the tab with Add-ons, tap Quick Gestures and then tap Enable and under Preferences, Open. Then you can see and customize individual gestures.

Maybe you are looking for

  • SelectManyListbox : How to set the value in the bean ?

    Hi, How can I set the selected values from a selectManyListbox in the bean ? My page:                     <li>                          <div class="box_multiple_selects clearfix">                               <div>                                   

  • Code 600

    Double clicking on an FCE file.fcp gets an error code - 600. Twice. Then it launched ok. Permissions recently repaired. What is code 600? Is there somewhere I can look it up? Thanks

  • GrowableArray.cpp. Out of swap space?

    Hi, I need some help interpreting an error log (the complete log is pasted below) The application (JBoss 4.2.2) is started on win 2003 with -Xms256m -Xmx1400m -XX:MaxPermSize=256m the log shows the following memory usage: Heap PSYoungGen      total 1

  • Multi-lingual Text trouble

    Hi there, I having trouble getting Director to display multi-lingual text in #text members. I'm using WinXP Pro and have installed everything that can be under the "Regional and Language Options". The text displays correctly in the thumbnail preview

  • SAP JVM default keystore file for Active MQ JMS SSL integration?

    Hi all, does the SAP JVM still have a default keystore file? I'm asking this question because I would like to integrate with Active MQ JMS SSL. The MQ-Libs are refering to the VMs default keystore in order to find the certificate for the SSL handshak