How do I open the Portege R100?

I have unscrewed all the screws from the bottom of the casing and also noticed the small latch on the inside of the battery compartment. The bottom of the casing still seems to be firmly attacheh though and I would appreciate any pointers on what else to remove?
The reason for the operation is that I want to upgrade the internal 802.11ab controller for a Gigabyte WIAG01 Mini PCI (108mbps).
Any suggestions?

Hello Graah
In my opinion it is very bad idea to open this sensible notebook on your own. A small mistake can damage the hardware components or different connections.
Anyway, as far as I know the wireless card is placed under keyboard on the right side and it is fixed with two screws. As far as I know the keyboard must be removed first. After that you can see these two screws.
Good luck!

Similar Messages

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How can I open the EP login page in the same pop-up window?

is it possible for me to using / only one window(Browser) pop-up to EP Page(Login or iView...).
In the firs general html page I create a EP login page link action[eg. "window.open('url', 'target_name')"],
but always launching new pop-up window(Browser).
How can I open the EP login page in the only one window(pop-up)?
Could anybody help me by giving suggestion and codding?
Thanks,
jin.

Hi,
if you want to redirect the root of portal system (http://portal/) to the login page, edit the
file and change the body tag as follow:
\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\index.html
<body onload="location.replace('irj/portal' + document.location.search)"></body>

How can i open the archived pst file in my Mac Air

How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
the documentation for JDK1.3.1 that I'm currently
using.Look more closely. There is indeed a setProperty(String, String) in
http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
"Since 1.2"
- Marcus

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

How do you open the DVD tray on a K430 without using Windows Explorer?

How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door. Am I missing something? Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk? Please help. Thanks.
Solved!
Go to Solution.

hi penguin247,
Regarding your questions:
1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
Link to picture
2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I open the updates window in "Adobe Application Manager"?

How do I open the updates window in "Adobe Application Manager"? Or can I or should I....??
I am a brand new Cloud member. I heard of the Retina update. Assuming this was where the updates would logically appear I went to the "Adobe Application Manager" app first. Without closing the "Adobe Application Manager" I opened Photoshop and went to the help menu and selected "Updates..."; a second window opened in the already open "Adobe Application Manager".
I selected update all.
The result is below:
DW CS6 12.1 Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dreamweaver CS6 12.0.1 update to address critical issues
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop 13.1 for Creative Cloud
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe InDesign CS6 8.0.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Bridge CS6 5.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Illustrator CS6 Update (version 16.2.0)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
DPS Desktop Tools CS6 2.05.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 7.2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Extension Manager 6.0.4 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Media Encoder CS6 6.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Now, I closed the "Adobe Application Manager" and opened "Photoshop" again and again selected "Updates..." from the help menu. The "Adobe Application Manager" opened again with just one window this time and the updates happened correctly.
I was hoping one of the updates would be to the "Adobe Application Manager", I don't think so.
So, If I were you I wouldn't select "Updates..." from an Adobe app unless the "Adobe Application Manager" is closed until they fix it...
Current version: Adobe® Application Manager - Version 7.0.0.128 (7.0.0.128) Note the Two windows in the "Adobe Application Manager" in the attached image.

The updates are currently available by going to Help>Updates within the Application. Once you invoke the Updater, which is a component of the Adobe Application Manager, it will locate and apply the updates. It looks like most of your updates have failed to install. I would recommend you begin by trying to apply the updates that are available on our product update page at http://www.adobe.com/downloads/updates/ and seeing if you face the same difficulty.
If you continue to experience problems with applying the updates then please review your installation log to determine the cause of the failure. You can find details on how to locate and interpret the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites. You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway. Find this file and you can alter your website.
Use a spotlight search to try and find it and if this does not work you can download something called Find Any File. If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published.

I've downloaded Photpshop elements 13 : how can I open the application ?

I've downloaded Photpshop elements 13 : how can I open the application ?

Thank you Kglad and John
Your question about 32 bit or 64 bit was good. In fact, before our exchanges, I downloaded Photoshop but I didn't run the application.
After our messages, I tried to click the setup
First,when I clicked "setup" in the directory ""32 bit PhotoshopElem13" I had an error message , then, I clicked the setup in the second directory, it was the good one.... 64 bit !
All is OK
"Merci" from Paris

I have the iPhone locked How can I open the SIM-lock

I have the iPhone locked How can I open the SIM-lock

Contact the carrier that the phone is locked to. Only the carrier can unlock your phone.

How do I open the door to my Optical Network Terminal (ONT) to replace the backup battery

I have an ONT that looks like this: http://www.verizon.com/cs/groups/public/documents/adacct/bbux400-open.jpg How do I open the door to it to replace the battery? Thanks Ben
Solved!
Go to Solution.

My ONT BBU (Battery Backup Unit) looks just like yours. The door is where it says ONT 314 and Verizon.
On mine, I can just grip the edge of the lower right and corner of the door, under the lights and buttons where it says SOHO, and pull the door open.
That exposes the battery.

How do I open the CD tray using Windows Keyboard

How do I open the CD tray of my eMac using a Windows Keyboard that does not have a eject button? If I use uControl Program to switch the alt and Window Keys (the option and ⌘ Keys) I can't use the iJect Program.

shulmice,
While not a perfect answer since you have to be logged in before you can open the tray, you can put an eject icon in the menu bar by double-clicking on ~/System/ Library/ CoreServices/ Menu Extras/ Eject.menu

I have an old Kodak Photo CD and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?

I have an old Kodak Photo CD (1999) and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?
Please help me open these photos. They are very important to me and I need to access them.
If I can't do it with any of the software installed on my computer, would someone be willing to open them, save them as jpgs and send them to me?
Thank you so much, Nancy

You can get the plugin here by downloading the Extra Content for Photoshop CS3 File 2
Just be sure to follow Note:Very Important Instructions or the link won't work.
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
After downloading the PHSPCS3_Cont_WWE.exe, double click on it to extract the contents, probably to your desktop.
Then in the Goodies folder, Optional Plugins folder, you'll see the Kodak PhotoCD folder
Open that and copy the Photo CD.8BI to C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
Copy the profiles to C:\Program Files (x86)\Common Files\Adobe\Color\Profiles

HT203175 how do you open the back of the iphone 3G to get to the battery?

How do I open the back of the Iphone 3G to get to the battery? My I phone has frozen and I have removed the two tiny screws, but still am unable to remove the back. Any suggestions would be greatly appreciated!

You do not.
The iPhone is not desinged to be user servicable.
Have you tried a reset?

How do I open the Portege R100?

Similar Messages

Maybe you are looking for