How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Similar Messages

Can the AirPort Extreme Base Station be plug-in to the power forever?

Hi,
sorry for my english but this is my question: Can the AirPort Extreme Base Station be plug-in to the power (electricity) forever? I mean, I don't have to un-plug the Base Station sometimes? Thanks
Alvaro

Sounds more like an issue with your router and
network than a problem with AEBS.
Which router?
I certainly do not need to reboot my AEBS like that,
I think I have rebooted it once in two years!
I would start a new thread describing your network in
more detail and the issues with the AEBS.
Thank you, but my diagnosis is the result of many days
of experiment with about hundreds of users. It's a bug,
I know were it is. It was reported to Apple in september
(2005).
It isn't that easy to upgrade at the same time all the
wireless (802.11b and 802.11g) that do have to interoperate
smoothly within the same space.
I don't think anyone need to waste more time on these
bugged firmware versions (5.6 & 5.7) as I already explained
it. They work smoothly just in a limited environment
which they were conceived for: one Mac connected to one
AEBS connected to one FAI.
You can't recommand these version to colleagues who have
to live in a real world with other wireless equipment
(a Mac not updated, an ABS not updated,
a Cisco wireless card emitting to 100 mW and smashing all
the neibourhood, a pre 802.11g+ card using 2 channels at
the same time...).
dan

How to add Ethernet ports to an Airport Extreme Base Station?

I have successfully connected an HP Office Jet 6310 to the Airport Extreme Base Station, after downloading the latest software from HP. It is printing wirelessly, and it is great so far.
The only problem is that the cable modem connected to ADSL has only one Ethernet port, and the Airport Extreme Base Station also has one Ethernet port. However, I need one more port to connect a phone (Vonage Telephone Adapter = VTA).
What is the easiest way to achieve this? I saw several other messages discussing hubs and routers, but the answer is not clear yet. If I purchase an additional router, should it be connected between the cable modem and the Airport Extreme Base Station, or the other way round?
Any help or advice would be appreciated!
Thank you in advance for your time.
MacBook Pro with 1.83 GHz Intel Core Duo Mac OS X (10.4.7)

One final vital piece of information, which should be my conclusion on this topic.
Following the advice received, I purchased a Switch from Linksys. Since the device didn't work for my purpose (dividing the Ethernet connexion into an Ethernet line for the HP printer and the Vonage phone), I called the Linksys support.
I was told that what I needed was not a switch, but a router. I thus had to get reimbursed for the switch and hunt for the proper router.
Finally, today, I have been able to find the item corresponding to my needs:
A Belkin Wireless G Router F5D7230-4
It costs less than 50 US$ and has all the necessary Ethernet ports. The setup is very simple, and I got it operational within a couple of minutes, despite some small problems getting the setup Wizard to work. It is Mac OS X compatible.
Thus, at the end, I have got the HP 6310 Office printer and the Vonage VTA phone working together, with a robust Wireless network including WPA security. I would recommend this type of setting.
The only trouble is that the AirMac Extreme Base Station has become completely useless! I will perhaps keep it as a souvenir, or as a decoration in the living room... This wouldn't have happened if the creators of this nice object, which is extremely expensive for what it provides, would have thought of including at least two Ethernet ports!
The unexpected reply to my query could thus be ironically formulated by saying: "replace the Airport Extreme Base Station with a cheaper an more efficient device." Sorry for that!
With my best regards to those who took the trouble to read this thread to the end.
Yours, Hotaru

How do I connect my Synology NAS to my AirPort Extreme base station?

I'm considering replacing an Apple AirPort Extreme base station with my current 5 year old router. I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router. I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Thanks for all your help in advance as I am VERY new with networking devices.

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

How do I find a hard drive connected to Airport Extreme Base Station?

*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address>

How do I get a VPN acct accessed using Airport Extreme Base station?

I have PC running Windows 2000. For my job, I access a hospital VPN at home. In my home, I am able to set up the Extreme Base Station for wireless conductivity with computers in my home and all have access internet wirelessly. No problem.
The problem is that I cant get it all to work together. How do I configure the base station to recognize/allow the VPN client to enter my network?
I currently have WEP 128 on. The computer used for VPN is hardwired to the base station. Even with security turn-off, I cant access the VPN via base station set up as it is.
help!
PC Windows 2000

I recently got my roommate's Lenovo t43p with VPN to finally work with my Airport Extreme.
1. Open the Airport Utility
2. Double click on your Airport Express on the left side to open up the panel.
3. Click on the "Internet" tab and then select the "DHCP" tab.
4. Click the "+" sign under "DHCP Reservations"
5. Create a name for the profile like "XP Work Laptop" or whatever, and then click Continue
6. You'll need to get your Windows laptop's MAC address which is sometimes under your laptop on a sticker, or you'll have to dig through XP's ridiculous Control Panel to find it.
7. Enter your laptop's MAC address in the field.
8. Lastly, in the 'IPv4 Address" field designate an IP address for your XP laptop that is within your router's range, if you're not sure of the range, the "IPv4 Address" range should be auto-populated with an IP address and you can just try it with that, or if it doesn't work you can change the last number to something higher but no more than like 4-5 digits more.
Hope this helps, Good luck!!

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
Elizabeth

Thanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual

Airport Extreme Base Station and Multiple Computer Access to the Internet

I have my IMAC connected to the internet via the Airport Extreme Base Station. When I am able to connect, my son's MacBook cannot. If I preform network diagnostics and reset the base station so he can connect (which appears to be luck on my part), I can no longer connect. When I first set this up, I had it working with all computers in the house. I tried to expand the system to boost the signal in our house with the airport express units. I have since removed them and started over, but still cannot provide internet access to more than one computer.
Help

Try this first...
Modem/Router Power ReCycling
- Power-off the DSL/Cable modem, Internet Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the DSL/Cable modem; Wait at least 30 minutes.
- Power-on the Internet Router; Wait at least 5 minutes.
- Power-on the computer(s)

How to disable Ethernet Port on 2003 Airport Extreme Base Station

I have a roommate who does not help with the cable bill. He is always plugging his computer into the ethernet port of the Airport base station (no wireless card in his computer). The Base Station sit on top of the cable box in the living where its plugged directly into the cable box for internet access. Unfortunately moving the cable box or base station is not an option. How do I disable the ethernet port or prevent him from having access to the base staion?

+How do I disable the ethernet port or prevent him from having access to the base staion?+
You could prevent him from connecting using wireless, but not ethernet.
On second thought, you could hide his ethernet cable. For a permanent solution, you could always fill the ports with glue, but would probably regret it at some point.

Latest Version for the round 802.11b/g AirPort Extreme base station.

Is v5.6 still the latest version? I have been looking on the website for almost 2 hours now and I can't even find v5.6. I heard it was pulled in 2005 but I still don't see a replacement.

Danger Will Robinson!
You don't want Firmware version 5.7 because it has serious stability issues. I had to reboot my airports every few days until I downgraded to version 5.5
Here a link to a lengthy thread discussing this:
http://discussions.apple.com/thread.jspa?messageID=4418341&#4418341
Andrew

How come everytime I turn off my imac it turns of my airport extreme base station for about 1 minute?

I really need advice, Im really getting annoyed by this even though its 1 minute. Any advice?

Try Resetting the AirPort Base Station

Additional Ethernet ports on Airport Extreme Base Station

I would like to know how one could add additional Ethernet ports to an Airport Extreme Base Station - I need 6 ethernet ports.
Is it possible to daisychain two Airport Express Base Stations so that all computers can see each other, or is it best to buy an ethernet switch?
If the latter is the answer, hardware recommendations would be appreciated.
Thanks

Is it possible to daisychain two Airport Express Base Stations so that all computers can see each other, or is it best to buy an ethernet switch?
It would be best (cheapest) to use an Ethernet switch instead of getting a second wireless router with a built-in switch.
If the latter is the answer, hardware recommendations would be appreciated.
A 4-8 port model from any of the name brand vendors should do just fine. An example would be the Linksys SD2008.

I have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

i have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

Read the user guide:
http://support.apple.com/manuals/#airport

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

Similar Messages

Maybe you are looking for