How do I organise tab groups automatically?

I've got around 30 tab groups with a total of around 100 windows(tabs) spread among them.
Right now all my tab groups just go where they want. Is there a 'tile tab groups' option or even an addon would be good.
It would be best if they sorted themselves out alphabetically rather than having me move them all around, it freezes FF for upto a minute when I move a single tab... I think it's because I have so many they all try to move and resize when one gets dropped in the middle of them

Which boxes are currently ticked in Clear Recent History?
*Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
Clear Recent History is not enabled by default, so if it is now then you or an extension did enable that.<br />
If you want to keep using it then you only need to make sure that the "Browsing History" don't have a tick to prevent App Tabs from being removed (App Tabs are considered as history because you visit sites).

Similar Messages

  • How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

    I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

    You can see the memory usage on the about:memory page.
    You can open about: pages via the location bar like you open a website.

  • How do I change tab group order?

    I have 3 tab groups. From tab group 1, when I press ---Ctrl + `---, it goes to tab group 2. From tab group 1, when I press ---Ctrl + Shft + `--- it goes to tab group 3. How do I change the order so that when I press ---Ctrl + `--- from tab group 1 it goes to tab group 3 and when I press ---Ctrl + Shft + `--- from tab group 1 it goes to tab group 2? Basically, I would like to change the order of tab groups that the keyboard shortcut goes through.
    Thank you.

    Heard about Tab Groups? They organize your tabs, eliminating clutter. Try it http://mzl.la/d21MyY

  • How do I **save** tab groups (or import/export them)?

    I needed to restart FF5 after installing some add-ons and when FF restarted, I was dismayed to find that my tab groups were gone!
    Is there a way to save my tab groups so that I can reload them after restarting FF? it would be better if FF simply "remembers" what tab groups were created and reinstated them after a restart.
    I LOVE tab groups as a way to organize all of the myriad tabs I fins myself opening as I venture off on a quest for knowledge. TG's can be made even better if there was a way to save, export, and import them (IMHO).

    I finally found out how to save my tabgroups! :) Simple, you have to choose exit in archive and NOT press the closebutton (X) up in the corner. Simsalabim, all the groups remains!! :D
    It's simple once you know the answer...
    Greetings from Jessica, Sweden.

  • How do I SAVE tab groups. They have disappeared when I next open Firefox

    I created 5 tab groups. it was great flicking between them but I closed my machine and when I opened again they had gone.
    How do I save them please or stop them disappearing
    Thanks
    pingu70

    Which boxes are currently ticked in Clear Recent History?
    *Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
    Clear Recent History is not enabled by default, so if it is now then you or an extension did enable that.<br />
    If you want to keep using it then you only need to make sure that the "Browsing History" don't have a tick to prevent App Tabs from being removed (App Tabs are considered as history because you visit sites).

  • How can I recover tab groups if I accidentally hit "X" instead of "Exit"?

    Hello,
    I had about six tab groups open with a total of 100+ tabs and accidentally clicked on the "X" at the top-right (I'm running Windows 7). The entire program closed without warning me that I was closing multiple tabs. When I restarted the program, only my most recent tab group was restored; the rest are gone. As you can imagine, I really want to get the rest of my tabs back.
    How can I restore the rest of the tab groups?
    Also, how can I make sure that one of following things happens?:
    - Disable the "X" button
    - Replace the action of the "X" button with the "Exit" function, such that if I accidentally click the "X", Firefox will exit and save all my tabs for the next session
    - Enable the warning about closing multiple tabs, before the tabs are all closed
    Thank you for your help!

    Thank you for the response, cor-el. Yes, I did look in recently closed tabs and windows. However, the recently closed windows section did not contain the tab groups that I had open previously (it only had two pop-up ads which I was not looking for), and the the recently closed tabs section only contained tabs from one of the tab groups.
    All of the "restore from last time" and "warn before closing" options were enabled prior to my accidental close-out, but neither option is working as it should.

  • How can I disable tab groups?

    Please tell me how to disable tab groups? I don't want this feature, I'd like to return to old individual tabs, which are not hiding

    Don't use them. If you have created a tab group then delete that group.
    *https://support.mozilla.com/kb/what-are-tab-groups

  • Help! How do I exit tab groups and get my session/tabs back. The icon doesn't toggle and instructions don't say how to get back -- first try and I'm stuck.

    This is the first time I tried to use tabgroups. I clicked on the bricks-style icon and then couldn't see any way to get back to my current firefox session and open tabs. It doesn't seem to be a toggle, no "go back" or anything else I can see. Help!

    In the Tab Groups window, I have a Close (X) button in the right upper corner (along with the Minimize and Maximize buttons). Clicking the Close (X) button will return you to your normal browsing session. In addition, SHIFT+CTRL+E will return you to to your normal browsing (SHIFT+CTRL+E also will open the Tab Groups window).
    *Article about Tab Groups --> http://www.makeuseof.com/tag/organize-manage-firefox-open-tabs-tab-groups/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How do I save Tab Group that i have created? So that everytime I open Firefox, it will be there for me rather than I have to re-create again.

    I have homepage with multiple sites. I like you Tab Groups which enable me to group those sites under particular group. However, I found that the group were gone when i close and open back Firefox.

    You can open it back in "about:home" just click "Restore Previous Session" and you will get your group tab back.

  • How to restore saved tab groups in Panorama

    I have created multiple tab groups in panorama feature in Firefox 4 beta5. But when i restart my firefox i expected to see my saved groups but didn't get any and i have to create them again.
    May be I am bit ignorant about panorama but i am not able to find any think related to this

    Here Guys, it's a "workaround" of it.
    http://browsers.about.com/od/firef2/ss/Save-Firefox-4-Tab-Groups-Between-Sessions.htm

  • [RESOLVED Maybe] How to save Panorama/Tab Groups?

    when i close FF and clean cookies and browsing history ..and then re open FF ..my panorama groups are lost ..also how do i make a certain group open as the default group when i reopen FF?
    Thanks

    For some reason my groups are saving now. Perhaps bcs i no longer have ..clear all history checked under the ..FF Options>Privacy. But i do clean ..Everything except ..Form Search History under the ..Tools>Clear Recent History FF Menu. I dont know why this is working but it is for now.
    The MAJOR Change I made was, as i also use Tab Mix Plus, was to turn off TMP Sessions and switched back to FF Sessions handler. Also instead of opening the last session ..i open the Home Page option where i have a couple tabs/pages set as home.
    I hope this helps some of you and continues to work for me :-))

  • New Install - How do I rearrange tab groups?

    I'm a CFEclipse user now trying CF Builder 2.
    I use a twin monitor setup and open the IDE across both.  I prefer to see my HTML Preview on the right side so that I can easily refer to it while editing code.
    In Builder, I can't figure out how to get the browser tabs on the right side and the editor on the left.  It seems that the browser tabs are required to be in the same group as the editor, meaning that one can not see both at the same time.
    Can that be so?
    Any assistance in overcoming this apparent limitation will be most appreciated!
    - Doncx

    Hi,
    For news/tiker portlets, in the new installation, you should find the "Yahoo" portlets which are basically news/stock ticker etc. portlets
    from yahoo. Additionally, you can visit http://portalcatalog.oracle.com to get more portlets developed in collaborative effort
    by portal community.
    Regards.

  • How to Default sales office and group in Organisation tab of crmd_order

    Hi Experts,
    In crmd_order transaction when user enters sold-to-party, then organisational determination takes place which brings sales area,distribution channel and division automatically under organisation tab.
    My requirement is to fetch the correspoding value of sales office and sales group for that Org unit and display them in the organisation tab.
    My logic goes like this:
    1) I have to fetch the sales office and sales group from the master data of ship to party ( i.e. bp with ship to party role).
    2) Then Give the sales area key( org unit, distribution, division) to fetch/filter and display the sales office and sales group.
    Which function modules to use to make the above 2 steps work. What code to write to make the above two steps work.
    I did not find any FM that takes bp with ship to party role and gives back the org unit data alongwith sales office and sales group.
    Then, how to link BP with role ship to party with Organisation Unit and then take the org key to read the org data.
    Which tables and FMs should I consider for this. I am thinking of using the merge method of CRM_ORGMAN_BADI.
    Thanks in advance,
    Sangeeta.

    Hi Sangeeta,
    As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
    Have a look at the following link for a complete guide to the Organization data determination customization.
    http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
    If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
    Hope this helps.
    Thanks,
    Samantak.

  • How do I automatically assign URLs to a Tab Group?

    I love the new Tab Group feature of Firefox 6, but it would be great if I could have new tabs open up in the appropriate group based on a pattern in the URL that I've clicked on. Is this possible?
    Thanks,
    Theo

    Thanks for your reply Matt, that is what I have been doing, but I was really hoping it would be possible to do this from the Sharing menu on either or both of my iPhone or iMovie.
    I guess I shall be disappointed yet again. As so often, "So much promise, so little delivery."

  • How to disable automatic reload of all tabs when i click on the tab group ?

    when i open a saved tab group, it reloads all the tab, i want to keep it manual.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Maybe you are looking for

  • Dual monitor setup MBA 2013

    Hello Everyone, This is my first post on the Apple Support Community. Nice to meet al of you! System information: Macbook Air medio 2013 Model MacBookAir6,2 Intel Core i7 1,7GHZ 8GB 512GB SSD I am wondering if it is possible to have a dual monitor se

  • IPhoto wont share via email. What to do?

    iPhoto's share function via email wont respond. It gives me the option to choose the size of the photo to be emailed but when I hit the "compose message" button, nothing happens. No error message. Nothing. I'm using Outlook. All software are up to da

  • Business Object Creation for OBN:

    Hi I am a very new user of the SAP EP. I believe i have EP 6.0 on my machine.(How do i find out which release of EP I am using ?) As part of my first step towards learning OBN, I tried to create a folder under "Business Objects". But, I do not get an

  • Printing Problem in Report

    Hi,    I am facing a problem while printing the report. My report is taking print from Dotmatrix printer. But print is coming as Portrait form. I want output as Landscape. The same print when i taken from Laser jet , i got Landscape format. But the s

  • Flash button help

    I have no trouble making a button. My problem is this. I make a button symbol. Place two instances of the button on the stage. Now I want to change the fill color of just one of those buttons. But when I do that, it changes both instances on the stag