How do I output a DTV legal file such as Video Gamut and Audio Loudness

I have heard that there are some sort of add ons that make my project Dtv ready but how do I set them up or are they downloadable add ons?
Thanks
Tom

Premiere will determine most of this stuff based on the presets it comes with, so there should be nothing to worry about on an average project if you don't mess it up with crooked color corrections or unsuitable audio mixing. Otherwise you would have to provide the exact requirements from the broadcaster and people may be able to advise - on the Prem forum. Generally I would advise you do some basic reading up, anyway. You are flying blind and that's bound to get you in trouble up to the point where the TV station or whatever may simply refuse the tape/ file.
Mylenium

Similar Messages

How can I save a Motion 5 file as a video?

How can I save a Motion 5 file as a video? I want to use it in an iMovie Project.

Everything about using Motion, including exporting a video (and much more), is available either in the application or online:
Help Menu> Motion 5 Help: see the Share Motion Projects chapter.
The manual can also be found online here: http://www.apple.com/support/motion/
Finally there is also this link to the manual: http://help.apple.com/motion/mac/5.1/

HT1660 My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Than

My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Thanks, Tom

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

TS1368 when downloading large files such as videos of television season do you need to turn off autolock to prevent download from halting

when downloading large files such as videos of a television season do you need to turn off autolock to prevent download from halting? And if so, if the download will take a significant amount of time (not sure how much offhand) how do you prevent burn in from prolonged screen image?

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

How do I output a large Ai file as multiple PDFs (via views, pages, whatever)

I am working in FreeHand 10 and Illustrator CS3 on a large street map. The client wants to do his own edits to the map in Illustrator (version unknown) then output it so he can show a section per page, in an atlas he plans to publish. And maintain the map himself in the future. The base map is 30 inches square, and the section excerpted on each page of his atlas will be 7 x 9 inches.
The client currently outputs (text-only) directories in MS Word, and I'm wondering if I need to tell him "Hey, you need to buy and learn InDesign (as well as Illustrator) to output your atlas" or whether there's an easy way to output a large map in multiple PDFs, a page at a time that he could use as images in Word. I am trying to keep it sensible for everyone plus affordable.
What I know about Word is you can make a picture box, and crop images placed in the picture box, but I could only get it to crop an inch or two at most. Not the comparative "limitless" picture box found in Quark (and I assume InDesign).
(In FreeHand I had a similar atlas project where I created the master map on page 1, then made a couple dozen small pages, each with a rectangle (a frame) on a top layer. I gave each frame a "lens fill" set to a magnification of 1X, and put the centerpoint over the desired part of the master map. The section of the map appeared in the frame. This worked great for the first five or ten pages -- I could make multi-page PDFs -- a sort of PDF atlas. Eventually all the processing of lines, type, and fills bogged down my Mac's (or FreeHand's) memory so the PDF export would abort mid-stream -- I ended up outputting only individual map pages or 10-12 pages per PDF).
IS THERE A WAY to do a similar, multi-page output, or a series of little PDFs, in CS3? (Or in CS4, which is in the mail)? I know the "professional" way is to place the full EPS or PDF of the map in a page layout program and crop the picture box to the desired area. That's making more and more sense.
I get the sense from what I don't find in the CS3 User Manual that the only way to output a drawing is a page at a time (and naturally only one page per file). I would feel a little nervous in CS4 making an array of multiple pages butted against each other and laying the map on top of them all (but maybe that would work). CS4 has "views" but I don't know if they correspond to output files.
There are enough pages in the finished atlas that it's not economical to make the master map into a big PDF, save multiple copies, then crop each PDF on a different section of the map (such as using Apple Preview). Enough hand-work that labor would equal the cost of the software we're tentatively too frugal to buy. (A clue as to how to proceed).
The client is on a PC (not necessarily a powerful one); has a friend with Illustrator. Is open to upgrading his equipment. I'm on a Mac G4, running Illustrator CS3 and soon CS4.
At a certain point it may be the least troublesome approach is to lay the learning curve and burden of [computer and] software acquisiiton on the client and let each piece of software do what it does best. Or say, "sorry, editable files aren't practical, but here's a good set of prints for you to mark up, and I'll do the edits and make you a set of PDFs" which is more how I usually work.
I acknowledge this was a rather long, multi-stranded question; thanks to anyone who waded through it, and I apprciate any wisdom anyone can offer. Thanks!

...continued
If this is a valued and expectedly ongoing relationship, regardless of whether the files working files are going to be in FH or AI, I would make sure that both your and his working files are both on the same application (and I would say even the same platform).
> The client currently outputs (text-only) directories in MS Word, and I'm wondering if I need to tell him "Hey, you need to buy and learn InDesign (as well as Illustrator) to output your atlas".
I would politely and briefly commend the client for considering doing his own routine edit maintenance, but caution him that such edits need to be done in the native map files, not in the "container" file of whatever program he imports the artwork into. Doing so will likely involve a not-impractical, but still-significant learning curve for him or his staff--editing the maps requires at least working familiarity with a vector drawing program--and offer your services to help him along the way as he learns. If the client is going to commit to doing his own edits, he needs to commit up-front to doing them
correctly in the native illustration files' format. Otherwise, he will be asking for trouble down the road that will eventually cost him more than the benefits of bringing the edits in-house.
>...or whether there's an easy way to output a large map in multiple PDFs, a page at a time that he could use as images in Word.
PDF exported from FH will not provide the client the editability you have suggested he needs. PDF exported from Illustrator (with AI editability included) will have the same file-size problem you've already encountered: Content of the map beyond the page is merely masked, not actually removed.
> I am trying to keep it sensible for everyone plus affordable.
I commend
you for that stance. Freelance illustrators often shoot themselves in the foot by being overly protective of
practial illustration / design work that a client rightly
needs to be able to edit. Helping the client achieve self-sufficency can be just as profitable (or more so) than requiring the client to come back to you for every little edit.
> What I know about Word...
Include in your explanation with your client: Common office- or personal-productivity software, by their nature, lack technical capability necessary and proper for commercial reproduction. It's not that they are "bad" or "amateurish" programs; they're just not designed for the purpose.
Leave open the option of re-importing the map illustrations into Word, if the client still wants to. But re-emphasize that any routine
editing of the working map files needs to be done in their native illustration program.
> (In FreeHand I had a similar atlas project where I [used Lens objects]. This worked great for the first five or ten pages...[but eventually]...bogged down....
Illustrator provides nothing like FreeHand's excellent Lens Fill feature. You can use Clipping Masks and Symobls as a cumbersome workaround, but you'll have the same file-size issues, because you are merely masking artwork, not actually removing it.
I must admit I can't remember if FH's Lens objects actually trim to their content after being Ungrouped, (and don't presently have FH on this laptop to check), but I don't think so. If they did, then Lens objects would be an alternative to the other cutting method described below.
> IS THERE A WAY to do a similar, multi-page output, or a series of little PDFs, in CS3? (Or in CS4, which is in the mail)?
I strongly suspect that artwork that
spans adjacent pages in AI CS4 will be treated the same as artworking which
extends beyond the artboard in current AI: it will be merely masked with a clipping path when exported to PDF, not trimmed. The same sloppy and data-heavy content problems will persist.
> I get the sense from what I don't find in the CS3 User Manual that the only way to output a drawing is a page at a time (and naturally only one page per file).
No. In CS3 you could:
1. Open the 30 x 30 map in AI on a 30 x 30 Artboard.
2. In the Print dialog, set up 7 x 9 page tiling, and in the Output pane, select Tile Full Pages.
3. Export a multi-page PDF.
But again, the content of the PDF pages would merely mask the artwork that extends beyond each page tile. Your PDF file(s) will still likely be much larger than necessary.
Understand, that may still be a workable option if the client places in his page layouts some
other format that actually crops the artwork. In other words, you could:
1. Get the FH native artwork into AI and perform all the cleanup necessary for the AI file to become from now on your permanent working file.
2. Use a single Artboard, and use PageTiling as described above to export the multi-page PDF.
3. Use Acrobat Professional to export the PDF pages to raster images.
4. Place the raster images in whatever program is to be used for the whole document page layouts.
> The client is on a PC (not necessarily a powerful one); has a friend with Illustrator. Is open to upgrading his equipment. I'm on a Mac G4, running Illustrator CS3 and soon CS4.
The above workflow should work fine. To be self-sufficient, it would require as a minimum:
* The client contracting with you to build a proper and clean AI version of the FH map. Depending on the actual content, that may be a straightforward file translation, or it may require alot of tedious and time-consuming cleanup after importing the FH artwork.
* The client (and/or friend) would need Illustrator and Acrobat Pro, plus whatever program he choses for the page assembly work. If he/they use AI CS4, that
may suffice for the page-assembly portion of the work, too. That's yet to be seen. One limitation that comes immediately to mind is that AICS4's long overdue multiple page capability is (unlike FH's) limited to 100 pages.
> Or say, "sorry, editable files aren't practical, but here's a good set of prints for you to mark up, and I'll do the edits and make you a set of PDFs" which is more how I usually work.
That is, of course, for you to work out with the client. It sounds like your head is screwed on straight. You are looking for the most practical and expedient solution to server your customer, not being denfensive and desirous of requiring the client to come to you for every little edit.
The decisions is going to boil down to how much actual illustration editing know-how he wants to take on. It can be a great hands-on training opportunity for you as his "on call" trainer. That arrangement would provide your client the practical autonomy he wants, with the comfort and confidence that things won't get out of whack with you as his outsource guru.
Or, the client may find that the editing tasks require more hands-on skill than he wants to take on. Consider doing a walk-through exercise to show him (and/or his staff) the skills involved in the kinds of edits they will need to make routinely.
Regardless, though, I would firmly insist that the editing needs to be always done "according to Hoyle" in the native illustration program--and
never (stress this) by means of cheezy workaounds in the page-layout program, or some intermediate program. That is
not in your client's best interest, even if it seems initially the "easy way out." It will quickly lead to the map artwork becomming an unmanageable mess.
continues...
JET

How to get LastModified time of a file in repository(in weblogic8 and Compa

hi ,
my task is that i have to compare modified time of 2 file.one is in file system other is database file . which is most recently updated (which is newer).
details :
we have to check that which file is most recently updated .if database 's file is newer then we copy that file in to file system other wise we keep file system 's file as it is till database file is not updated
so that we can put the latest data in cache(which is in file system ) so we need not to access database again and again we just get data from our cache(or file system).
technical Detail:
my task is that i have to compare cache's file and repository's file . which is most recently updated (which is newer).
in all i have to done in weblogic server 8.2 's repository and file system(cache) .
i want to know that how we can check that when the file in repository last modified.
i want to check that node content of a particular repository (file /image/any data ) last modified by anyone , so that i can put the latest data in cache if cache 's file modified time
is less then repository's file modified .other wise no need to copy all file/data again and again ,if no modification .

If the file is in the resource path of a webapplication, then you can use
          URL u = servletContext.getResource("path/to/resource");
          URLConnection connection = u.openConnection();
          connection.getLastModified()
          If the webapp is exploded, then you can use the getRealPath() on servletContext to get the absolute path on the disk and create a File, then invoke lastModified() to get its timestamp.
          -- Nagesh

How to import programmatically an APEX images file using workspace images option and CSS files to APEX?

Oracle db 11gR2
Oracle APEX 4.2.1
Linux RHEL 6.3
I am importing a images file programmatically into APEX. And also a CSS file.
I want to add an images file to my APEX instance but I want to choose the option -- workspace images --. How does one do that programmatically via the APEX API e.g.?
I don't want the images tied to an application within APEX.
Does one do the same thing for CSS files that are imported to APEX?
thx.

This is interesting and helpful, I use the following code to import my APEX database application and run it via SQL*Plus and it works fine for database applications -- what do I need to change/add/modify in order to load the images and CSS files? NOTE: I want the images to be -- Workspace images -- not tied to any application. Also, I need to handle the situation where the images and CSS data already exist in the APEX environment as well as when they are not there (i.e. initial install). Usually it is a case where it is an upgrade so the data already exists in the APEX app and just needs to be updated.
declare
                  v_workspace      varchar2(35)    := 'WORKSPACE';
                  n_existing_app   number          := 123;
                  n_new_app        number          := 456;
                  v_app_alias      varchar2(35)    := 'WKALIAS';
                  v_parsing_schema varchar2(35) :='WORKSPACE_PARSE';
                  n_secgrp_id      number;
                  v_err_msg        varchar2(200);
                  n_err_num        number;
                  n_workspace_id   number;
                begin
                  -- get workspace id
                  select workspace_id
                  into n_workspace_id
                  from apex_workspaces
                  where workspace = v_workspace;
                  -- set workspace id
                  apex_application_install.set_workspace_id (n_workspace_id);
                  -- set security group
                  apex_util.set_security_group_id (p_security_group_id => apex_application_install.get_workspace_id);
                  -- set pasring schema
                  apex_application_install.set_schema(p_schema => v_parsing_schema);
                  -- delete existing app
                  begin
                    wwv_flow_api.remove_flow(n_existing_app);
                  exception
                  when NO_DATA_FOUND then -- do nothing when the application does not exist
                    null;
                  end;
                  -- set new app id
                  apex_application_install.set_application_id(p_application_id => n_new_app);
                  -- generate offset
                  apex_application_install.generate_offset;
                  -- set application alias
                  apex_application_install.set_application_alias(p_application_alias => v_app_alias);
                  exception
                  when others then
                    n_err_num := SQLCODE;
                    v_err_msg := SUBSTR(SQLERRM, 1, 200);
                    dbms_output.put_line('Error number = ' || n_err_num);
                    dbms_output.put_line('Error message = ' || v_err_msg);
                end;
@newapp.sql
commit;

How can I match sound quality between video clips and audio clips?

Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
      but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
      recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.

Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
     The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all.

FLV file won't play vid and audio for more than 3 secs

I tried to convert this FLV file to MOV using ffmpeg, and here the error i get
/usr/bin/ffmpeg -i internetmarketing.co.at/be87.flv internetmarketing.co.at/be87.mov
FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --prefix=/usr --libdir=${prefix}/lib --shlibdir=${prefix}/lib --incdir=${prefix}/include/ffmpeg --enable-shared --enable-libmp3lame --enable-gpl --enable-libfaad --mandir=${prefix}/share/man --enable-libvorbis --enable-pthreads --enable-libfaac --enable-xvid --enable-libdts --enable-amr_nb --enable-amr_wb --enable-pp --enable-libogg --enable-libgsm --enable-x264 --enable-liba52 --enable-libtheora --extra-cflags=-Wall -g -fPIC -DPIC --cc=ccache cc --enable-swscaler
libavutil version: 49.4.0
libavcodec version: 51.40.2
libavformat version: 51.11.0
built on Feb 4 2008 14:49:27, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
[flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
[flv @ 0x7fc0b4b41160]Unsupported audio codec (6)
Seems stream 0 codec frame rate differs from container frame rate: 1000.00 (1000/1) -> 55.92 (671/12)
Input #0, flv, from 'internetmarketing.co.at/be87.flv':
Duration: 01:45:56.4, start: 0.000000, bitrate: N/A
Stream #0.0: Video: flashsv, bgr24, 640x480, 55.92 fps(r)
Stream #0.1: Audio: 0x0006, 22050 Hz, mono
File 'internetmarketing.co.at/be87.mov' already exists. Overwrite ? [y/N] y
Output #0, mov, to 'internetmarketing.co.at/be87.mov':
Stream #0.0: Video: mpeg4, yuv420p, 640x480, q=2-31, 200 kb/s, 55.92 fps(c)
Stream #0.1: Audio: aac, 22050 Hz, mono, 64 kb/s
Stream mapping:
Stream #0.0 -> #0.0
Stream #0.1 -> #0.1
Unsupported codec (id=0) for input stream #0.1
[ps23240]$
that's the error i get, and supposedly ffmpeg should be able to handle this conversion
http://ubuntuforums.org/archive/index.php/t-431941.html
...so i have QT Pro, and it plays the vid and audio for 3 secs and then only plays video. I'd like to be able to use the vid and import it into iMovie. That's what I'm going for...
...suggestions

It seems that I can't login to the developer forums. I'm in the university program and when I try to login to apples developer forums I'll always be redirected to the login screen.

Plug-ins for Previewing files such as .rtf, .swf, and .html in Finder?

Are there plug-ins which would allow files such as .html and .rtf to display details of their content within the Finder's Preview pane, in a way similar to the way it is possible to preview .pdf, .txt, and .jpg files?
thanks

No, but any text editor can display html and rtf files, for example, TextEdit in your Utilities folder.

How do I adjust video clip and audio start times?

I cant figure out how to adjust the start time of video clips and songs. I want my music and video clips to start at different times. I am trying to have music and pictures start at the same time at the begining of the movie then transition into my videos at a specific time. Also i am wondering if there is a way to combine the whole video and image segment into one block and be able to shift it up and down the timeline? Does anyone know how to do this? Thanks

FreshlySnipes wrote:
… I want my music and video clips to start at different times. ...
instead of adding music to the background, 'stick' the music-clip to your video clip => the music appears as a green bar, you can move, shorten etc as any other clip.
… if there is a way to combine the whole video and image segment into one block and be able to shift it up and down the timeline? …
not in iMovie.
this is one of the major features (grouping and magentic timeline) of FCPX

How do I OUTPUT an edited picture file from the iPad (latest) to an external USB for easy transfer?

I am a photographer and I use my camera and iPad everyday. Camera takes pictures, connect to iPad, edit pictures with iPad software, output to Internet somwhere (Dropbox, etc..).
However, sometimes I need to hand someone a USB stick with an edited picture on it that came directly from the iPad. I know that I could do it by buying another computer but that would be silly. I do not have another computer.
I need to get the picture file OFF the iPad onto an external storage device (USB stick for instance). Can anyone help?

Currently you can't use the camera connection kit to export pic to a USB thumb drive or an SD card.
 Cheers, Tom

How to export output to Excel (or file that can be opened by excel).

Hi,
Have just installed SQL Developer.
Have entered an SQL statement and Executed the Statement. Now I want to save the result in Excel. But I cannot find a way to save the result. When I choose to save I only save the SQL statement.
Please advise.
Thanks,
Anja

Found it!
Just do a right click somewhere on the statement or output and export as csv.
Anja

HOW Do I Store All My MP3 files on an external drive, and point iTunes?

I see on this forum that folks are storing byte-hogs like MP3 and MP4 files on an external hard drive, leaving the internal drive with more room for processing.
My internal drive is full, so I got a 2 Tb external drive where I want to store my MP3 and MP4 files.
After I move the files to the external drive, HOW do I point iTunes, iPhoto, and iMovie to the external drive?

Type "move itunes library to external drive" into the search bar at the top of this screen next to "Support".

I am not getting required output after importing xml file having HTML tags, MathML and Latex code

I created well formatted xml having html tags, MathML code and Latex code inside
XML with sample latex
<question>
 8. In this problem, <Image style="vertical-align: -9pt" title="5a\frac{7b}{3}" alt="5a\frac{7b}{3}" href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%205a%5Cfrac%7B7b%7D%7B3%7D%0A"></Image> and <Image href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%207b%5Cfrac%7B5a%7D%7B3%7D" style="vertical-align: -9pt" title="7b\frac{5a}{3}" alt="7b\frac{5a}{3}"> </Image>are both mixed numbers, like <Image src="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%203%20%5Cfrac%7B1%7D%7B2%7D%20=%203.5" style="vertical-align: -9pt" title="3 \frac{1}{2} = 3.5" alt="3 \frac{1}{2} = 3.5"></Image>. The expression <Image style="vertical-align: -9pt" title="5a \frac{7b}{3} \ \times 7b \frac{5a}{3}" alt="5a \frac{7b}{3} \ \times 7b \frac{5a}{3}" href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%205a%20%5Cfrac%7B7b%7D%7B3%7D%20%5C%20%5Ctimes %207b%20%5Cfrac%7B5a%7D%7B3%7D"> </Image>is equal to which of the following choices? 
</question>
XML with sample html tags
4. Examine the expression 3k2 + 6k - 5 + 6k2 + 2.When it is simplified, which of the following is the equivalent expression?
XML with sample MathML tags
5. Find the vertex of the parabola associated with the quadratic function <math xmlns="http://www.w3.org/1998/Math/MathML"><mi>y</mi><mo> </mo><mo>=</mo><mo> </mo><mo>-</mo><msup><mi>x</mi><mn>2</mn></msup><mo> </mo><mo>+</mo><mo> </mo><mn>10</mn><mi>x</mi><mo> </mo><mo>+</mo><mo> </mo><mn>4</mn></math>
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mo>-</mo><mn>5</mn><mo>,</mo><mo> </mo><mn>69</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mn>5</mn><mo>,</mo><mo> </mo><mn>29</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mn>5</mn><mo>,</mo><mo> </mo><mn>69</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mo>-</mo><mn>5</mn><mo>,</mo><mo> </mo><mn>29</mn></mrow></mfenced></math>
None of the above works fine after importing xml to Indesign document/templete, it is not renderting equivalent out instead it is showing the same text inside tags in the Indesign document.
I have lot of content in our database, I will export to XML, import to Indesign, Indesign should render required output like what we see in the browser and export the output to printed format.
Import formated XML to indesign --> Export to Quality Print Format
Can any one guide me and let me know whether it is posible to do with Indesign, if so let me know in case if I am missing anything in importing xml and get required output.
Thanks in advance. Waiting for reply ASAP.

Possibly your expectations are too high. ... Scratch that "possibly".
XML, in general, cannot be "rendered". It's just an abstract data format. Compare it to common markup such as *asterisks* to indicate emphasized words -- e-mail clients will show this text in bold, but InDesign, and the vast majority of other software, does not.
To "render" XML, HTML, MathML, or LaTeX -- you seem to freely mix these *very* different markup formats, unaware of the fact that they are vastly different from each other! -- in the format you "expect", you need to apply the appropriate software to each of the original data files. None of these markup languages are supported natively by InDesign.

How do I output a DTV legal file such as Video Gamut and Audio Loudness

Similar Messages

Maybe you are looking for