How do i output mp4 files in compressor

I need to output a copy of a library file created in FCPX to a SD mp4 format. I bought compressor, but do not see a setting for this. I only see .mov file options. Can you help?

This is for first time compressor users, free, short, will help you through the full workflow, "bare bone basics".
http://www.finalcutprox.guru/FinalCutProX.guru/Compressor.html

Similar Messages

TS3778 How do I open MP4 files with VLC?

How do I open MP4 files? I have VLC open on my desktop but cannot manage.

mushybutt wrote:
I believe the proglem is with in Adobe CS5 and something just isnt working correctly and that maybe why it cant read or do anything with RAW files. I also noticed that Adobe's site says that it supports canon 70D CS2 files. my camera files are CR2, im not sure if maybe that might have something to do with my issue.
Nothing to do with anything being faulty in CS5.
The reason has already been given by tpolakov above: The 70D was first supported in Camera Raw 8.2 which is only compatible with CS6 and later. CS5 is not compatible with Camera Raw 8.2 so CS5 cannot read Raw files from the 70D. That's all there is to it.
mushybutt wrote:
Thanks Tomsm13, I actually tried to convert the files to DNG but that doesnt work either. I used the latest compatable Adobe DNG converter and i get a message that it can not find any camera RAW files to convert.
You select a folder containing CR2 files, not a CR2 file.
See Camera Raw: How to use Adobe DNG Converter - YouTube
From 1.40 onwards.

How can I import MP4-files in FCPX?

How can I import MP4-files in FCPX? Should i convert the files? Do you know good (free) software?
Thanks!

MPEG-4 isn't nearly enough information. There are many other factors that determine whether it will work in FCP. Many MPEG-4 files can be imported and optimized directly into the application.

How do I convert MP4 file to AVI or MOV using MacBook Pro (2010)

I am 10.6.4 new user on a new MacBook Pro. This is my first Mac computer.
I want to convert a MP4 video file to AVI or MOV file type. How would I do this on my new Mac? Documentation says I have Quicktime X, but I cannot find Quicktime X on my system. When I try to load Quicktime 7 Pro, my system says I have Quicktime X and cannot load Pro. Apple websites say Pro version will allow me to convert the MP4 files. Anyone have any experience or ideas on what I should do? How do I find Quicktime X? Will it do the conversion for me? Thanks

Use MPEG Streamclip, or open the QuickTime Player from the /Applications/Utilities/ folder, installing this software if needed.
(53722)

How to attach a MP4 file to email in Mail?

How do I add a MP4 video file to an email? When I drag or use the "attach file" process in Mail I keep getting a "Missing Plug-in" message.
The file opens in Quick Time Player on my iMac and runs just fine.
The MP4 is a Holiday Greeting from my grandchildren that was Podcast then converted to a MP4 and sent to me.
The destanation is their father in Afghanistan... He was unable to see the Live Podcast when it happened ( a Pre-School Christmas Program).
My son's Mac Book has same OS & Mail program I have.
Thanks,
Naida from Tacoma, a Grandparent

As an added note: The Producer of the Live Podcast provided the MP4 file for me to send on to my son.

How to merge two .mp4 files into one file?---Help!

When two clients make viedo chats on FMS,FMS saves two clients' audio and video informations into two seperate mp4 files.
Now I want to get one mp4 file which contaions one cilent's audio and video informations and another client's audio information when recording
Is there any way to deal with this problem?
Thanks in advance..

Hi Tibor,
Below is the output i got.
[Tracer_2]<?xml version="1.0" encoding="UTF-8"?><Rowsets DateCreated="2015-04-05T23:22:05" EndDate="2015-04-03T11:10:27" StartDate="2015-04-03T11:10:27" Version="14.0 SP5 Patch 11 (Aug 27, 2014)">
    <Rowset>
        <Columns>
            <Column Description="" MaxRange="100" MinRange="0" Name="col1" SQLDataType="1" SourceColumn="col1"/>
            <Column Description="" MaxRange="100" MinRange="0" Name="col2" SQLDataType="1" SourceColumn="col2"/>
            <Column Description="" MaxRange="100" MinRange="0" Name="col3" SQLDataType="1" SourceColumn="col3"/>
        </Columns>
        <Row>
            <col1>1</col1>
            <col2>2</col2>
            <col3>3</col3>
        </Row>
        <Row>
            <col1>11</col1>
            <col2>22</col2>
            <col3>33</col3>
        </Row>
        <Row>
            <col1>a</col1>
            <col2>b</col2>
            <col3>c</col3>
        </Row>
    </Rowset>
</Rowsets>
Please find the image below to achieve this. Please note, I have used local variables to assign input xmls and repeat through it. Repeater_0 for Headers and Repeater_1 for body.
Kindly ignore Doc_0 here, it's for another purpose. Document_1 is what we are focussing on.
Please note, you would not be able to see columns as those are dynamically created. Still you can map it as shown above.
Hope this helps.
Best Regards,
Swaroop

Does anyone know how to move a .mp4 file from flixter into iTunes?

I have downloaded a digital copy of a movie that I received when I purchased a Bluray disc. Most of the time, these go directly into iTunes, but this one went into Flixter. It is an .mp4 file. I tried using Add File to Library, but it didn't work. Any suggestions?
Thanks!

Never mind - got it figured out!!

How do i play .mp4 files via Dreamweaver CS3??

Hi,
Using Flash CS3 the RTMP path to the .mp4 file is:
rtmp://localhost/vod/mp4:sample.mp4 and it works fine to play
.mp4's, mov's etc.....
In Dreamweaver CS3 it wont accept any combination of paths.
Unlike Flash CS3 which only requires the single String,
Dreamweaver has two boxes that need to be filled in: The Server URI
field and also the Stream Name field.
Like FMS 2, where you don't name the streams folder in the
url, Dreamweaver CS3 is looking for it ie the "media folder" which
has replaced the "stream" folder.
Where in Flash CS3 you have to use the convention
mp4:sample.mp4, Dreammeaver will not accept anything.
Any help here would be appreciated

I assume from the silence that Dreamweaver CS3 has not been
updated to handle Flash 9 player and streaming Video from FMS 3.0
then.

How do I copy MP4 files onto my IPad while travelling?

Hello all
I picked up my first IPad through work last week, and am still familiarising myself with the device. What I did manage to do is connect it to ITunes on my home computer and copy all of our childrens TV shows onto the device for our daughter to watch, and it all went smoothly.
I have a question regarding this process however. I tend to watch a lot of TV shows, and in most cases I wait until after the season is finished and pick up the boxed set, so that I can watch it when I want, without commercials. What I then do is convert them to (unprotected) MP4 files that I then usually copy to my PS3 to watch them on our TV. Just as a test, I copied a few onto the IPad and they look great, I could easily see myself using this device to watch shows while travelling.
However, our IPad is only 16 gigs, and in longer trips I would probably want to take more shows than that would allow. I also have a 1 Terrabyte portable harddrive though, that I can fit ample amount of shows on.
At the moment I have only connected the IPad to one computer running ITunes, which is my PC at home. However lets assume I was travelling, and had both my external hard drive and IPad. What would be the best solution for copying movies from that external harddrive to the IPad to allow me to watch additional shows? Unless I'm mistaken, I can have up to 5 computers authorised with my account. Would it in theory be possible to find a PC, authorise it to my Ipad, copy the files over and then deauthorise that PC? Or if not, what is the recommended solution?
Apologies if this is common knowledge, I'm still a newbie.

Even though you can have your iTunes account authorized on 5 computers your iPad can only be linked to one computer. If you used another computer to copy your content from your external drive you would have to Restore the iPad with the computer erasing all other data. The process will allow you to backup then Restore to that back up but it will not contain any of the media files you wish to keep on the iPad. This is why it is important to get the most storage on an iOS device you can afford.
You might want to look at something like Kingston's Wi-Drive which is an external drive your iPad can access through wifi. http://www.kingston.com/us/usb/wireless#wid I don't think it has any integration with iTunes but you could put a copy of the videos you wish to take with you then play them on it it's app.

How to play an mp4 file on iphone 6

I have just bought an iPhone 6 that I want to use for watching movies when traveling - so I went for the 128GB to be able to store a few movies.
But I am lost - I have followed the instructions to use iTunes to transfer a movie (mp4) file. But where is the file on the phone? And what app do I use to play it? And BTW, will the wonderful VLC app come back for ios 8?

You have to sign out of the account. If the phone is using find my iPhone, you must have the ID and password to remove the phone from the account and activate with your own.

How to write output to file in flash

hi all experts.
I want to monitor a specific link. Lets say when it goes down, i want to write the following to a file in flash called link_mon.txt
link down <show clock output>
When it gets back up
link up <show clock output>
I know how to write the applets and use sla tracking for monitoring, i just want to know how to write the output(user defined) to a file in flash ?

What you want to do is not possible using applets. You can write CLI output to flash using the redirect command:
action 1.0 cli command "enable"
action 2.0 cli command "show clock | redirect flash:/output.txt"
But you cannot include your own custom text. For that, you will need to use an EEM Tcl policy. Within the Tcl policy, the code to write the output to flash would look like:
if { [catch {cli_open} result] } { error $result $errorInfo}array set cli $resultset fd [open "flash:/output.txt" "a"]set output [cli_exec $cli(fd) "show clock"]puts $fd "link down $output"close $fd

How do I send a file from Compressor to create a DVD using iDVD?

I edited the movie in FCX and used Compressor to add chapter markers. How do I export it as a file for iDVD? Thanks

Hi Lisa,
I am assuming you have these files on your Local Hard Drive and you want to upload them to Acrobat.com.
In order to do so, you would need to open cloud.acrobat.com and click on the 'files' tab on the extreme left and thereby you can upload your files to Acrobat.com by choosing 'Upload file' Icon on the right hand side of the Window.
Please revert back if you have any other query or need any further assistance.
Regards,
Rahul

How do I get Mp4 files to play in FMS?

I have the FMS working with .flv files but I can't seem to get .mp4 or any other format file to play using it?

Are you by chance using sub-folders under the VOD app? That was the mistake I made. Example:
Wrong:
http://testserver.com/vod/department/mp4:video.f4v.
Correct:
http://testserver.com/vod/mp4:department/video.f4v.

How to best output Shake files to FCP so that FCP likes them

Hi,
I think this post might be better suited for the Shake Subsection.
I have a totally tricked out 8 core Mac pro with 8 GB ram and a 1 TB drive (mostly empty). I'm using the Latest FCP. Recently, I've been editing some HD video that I've shot and have been quite pleased with the performance of the machine/software. However, I am experiencing a weird problem. I also have Shake, which I am using to do some composting and, relevantly, remove a small amount of camera vibration from my footage. (It works great.)
However, any files that I export from Shake, using (as best as I can tell) the exact same file formats and codecs that my imported Raw (unprocessed in Shake) video is. That is: they are quicktime files, Using HDV 1080p30fps, with 29.97 FPS "drop frame" codec. While the raw imported files work great, the files I export from Shake and put into my timeline result in a "Spinning Ball" whenever I do anything at all to them- play them, move the timeline around, cut, apply a filter etc,.
What am I overlooking?
What settings can I use in the Output Node to emulate the "native" captured video of FCP.

From page 167 of the Shake manual:
Shake Does Not Support HDV
Shake does not support long-GOP formats, including HDV, MPEG-2, or MPEG-1. If you
want to use HDV media that was captured with Final Cut Pro or Final Cut Express HD
in Shake, recompress it with the Apple Intermediate Codec first.
Actually, that is a bit outdated. Try using Apple ProRes 422 as your intermediate codec.
In fact, you might want to do your FCP editing in ProRes as well:
http://www.kenstone.net/fcphomepage/when_to_staynative.html
http://www.kenstone.net/fcphomepage/capture_hdv_prores_fwbalis.html

How to play a MP4 file?

Hello all, I'm a new iPad user, I'm just want to play a MP4 (recorded using a GoPro HD camera) in the iPad. I've added the file to iTunes but when sinchronizing an error message says the file was not copied to the iPad because it cannot be played.
These are some properties of the video file:Lenght: 11:05; Size: 963MB; Frame width: 1280; Frame height: 960; Frame rate: 29 frames per second, Data rate: 12014 kbps; Total bit rate: 12142 kpbs.
Thanks for any help!

The supported video formats are (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

How do i output mp4 files in compressor

Similar Messages

Maybe you are looking for