How do I output to external monitor in real time? Thought FCP6 could.

I have been looking through the manual for FCP6 and can't seem to find out "HOW" to output HDV through firewire while editing. Thought this was a new feature you would not need an HD card like Kona etc. Is it even possible? or is there more to it than they say?

IT will, yes. But it will convert the image to a DV image, which is fine for watching, but not at all good for judging the quality of your image or for color correction.
Giogiangogo gave you a good starting point to look.
Shane

Similar Messages

  • Satellite Pro U300: DVD issue - error: cannot output to external monitor

    Hi,
    I was having problems playing a dvd on my U300.
    Basically the software would load but when I tried to play the dvd it said "cannot output to external monitor".
    Having gone through all options I could not find anything to stop this happening. I then downloaded the latest software from the toshiba site.
    dvdpl-20070807102909.zip
    I resintalled this but got the same error message.
    I then uninstalled the software and tried to reinstall but now it just produces an error mesaage saying it cannot intsall the software on this computer.
    How can I reinstall this?
    Regards,
    Mark

    I presume you have received the Toshiba Recovery CD. Am I right?
    On this CD you can find the Toshiba image file. This image contains the Vista OS, Toshiba drivers, tools and additional software.
    But note; you cannot install only a single program. To reinstall a application from the Recovery CD you have to format the HDD and have to reinstall the whole OS using the Recovery CD.
    As Gipsyman said, the Toshiba driver page contains update and the original preinstalled software is needed.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • How do I connect an external monitor to my MacBook Air?

    How do I connect an external monitor to my MacBook Air?

    With a minidisplay port to VGA or DVI or HDMI adapter:
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter?fnode =53

  • Hp dv6 1355dx laptop - how do I connect 2 external monitors?

    I have a HP dv6 1355dx laptop Entertainment PC.  How do I connect 2 external monitors (both have VGA cables) and neither one has HDMI connectors.  My laptop has only 1 VGA connector, so I can display my laptop video and 1 of the external monitors. 
    Any help would get greatly appreciated.  I am even willing to buy a docking station or port replicator.

    Hi,
    Docking station or port replicator won't solve the problem because of your internal graphics card. You need something which is similar to the following products:
        http://www.matrox.com/graphics/en/products/gxm/
    or USB to 2 VGA monitors but very hard to find (normally you can only get 1 VGA and 1 other, not both VGA's).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • How to export photo to external hard drive?  (time capsule 3t)?

    cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....

    how to export photo to external hard drive?  (time capsule 3t)?
    Simple - launch iPhoto, select the phtoos and export (file menu ==> export) to the destination of yoru choice - see the user tip onexporting for details on the export optiopns - https://discussions.apple.com/community/ilife/iphoto?view=documents
    However is the Time Capsule being used for Time Machine backups? If it is do not use it as an external drive too - it needs to be dedicated to one use only
    cant find photo in hard drive. where does iphoto store photo? i looked for the foler everwhere....
    And this is a totally different question - by default in your iPhoto library - and to access then see the user tip on accessing yoru iPhoto files - https://discussions.apple.com/community/ilife/iphoto?view=documents
    You never access them directly - always using the supported access methods
    LN

  • How do I monitor in real time my teen's text messages?

    How do I monitor in real time my teen's text messages? 

    I have just started using TeenSafe.com.  I like that it monitors even deleted messages but it only updates while phone is being recharged.  And I haven't figured out yet if it picks up iMessages.  I can get location in real time which is helpful.

  • How can I boot my PXI controller into real-time without a floppy disk?

    My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

    If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

  • AE CS6: How to Ram preview or playback in smooth real-time everytime?

    Hi guys,
    I would  like to know how to Ram preview or playback in smooth real-time everytime? I'm using a videohive template and adding in my footages to the media holder comps. The AE template is complex I guess.
    Hee's the problem, everytime I make a change to text, add a footage replacement or make any change at all, I have to completely render and wait a long time to see my final product in "Real-time"/smooth. Is there someway that I can render out the whole thing once and even though I make a change the entire video will play smoothly without rendering time? 
    PC Specs:
    HP 510t
    Windows 8 Pro x64 bit
    16GB Ram
    i7 2600 CPU @3.4 GHz
    GTX 660Ti

    Proxies don't affect rendering beyond the point of reducing the resolution and thus the nuimer of pixels that need to be processed, but since the retain the effect properties at full resolution, e.g. a large blur still renders just as slow. They are more a means of reducing file I/O bandwidth while working really.... As I said, the best way to optimize this would probably be to restructure the project so parts that don't change reside in separate pre-compositions and can use the disk cache.
    Mylenium

  • How do I output the program monitor from Premiere Elements 13 to an external TV monitor?

    I can find information about dual monitor set ups, but is it possible to output the program monitor only to an external monitor?
    If so, what is needed?
    I'm using PE`3 on a PC with Windows 7  64 bit  with an NVIDIA Quadro NVS 290.
    Thanks

    bobj
    Have not found a way, but....
    Do you have a HDMI cable and does your computer and TV each have a HDMI port.
    The TImeline panel appears to be the only undockable panel in the Premiere Elements 13/13.1 Expert workspace area (Window Menu/Dual Monitor)
    The best I can do is to make a HDMI connection between the HDMI ports of my computer and TV, with display at Duplicate or Extend. That does not appear to be what you seek.
    The other part of all this is that Premiere Elements used to have a "Playback Settings" in Project Settings and accessed from
    right clicking the Edit area monitor. That is no longer to be found in 13.1, even in a grayed out state. And, for me, the Playback Settings could not be made visible
    when attaching a 3rd party device.
    In the days of Premiere Elements 11, the answer to your question might have been as described in the following
    Adobe Premiere Elements 11 * Previewing movies
    Until proven otherwise, I am thinking that it cannot be done in Premiere Elements 13/13.1. But, I am not at a stage where I would put a never and always stamp on this.
    ATR

  • How do I use an external monitor with my MacBook??

    Hi,
    I recently purchased my MacBook, but when I am at home, I want to be able to use my MacBook like a normal computer, by plugging a keyboard, mouse and my existing LCD monitor to it.
    What do I need to purchase to enable this and what system settings do I need to adjust to get my monitor to work?
    Could I have my laptop closed while i am using my external monitor? How do I do this? I don't want my MacBook open, while I am using my monitor!! Can someone please give me a simple step by step guide on how to turn on and use my laptop which my external monitor plugged in.
    Thank you very much for your help.

    Can you read it ? http://discussions.apple.com/thread.jspa?messageID=3510076&#3510076
    Shortly,yes,if your Display connected,just close it and than click the mouse it'll wake up in external display.

  • How can I split an external monitor's screen on MacBook Pro

    I have a MacBook Pro with TWO external monitors.  When maximizing a program on one of the external monitors it expands across BOTH screens. When I do the same thing on my Windows 7 system the program is contained to the monitor it is being displayed on. (Pretty smart of that PC to know which monitor I'm working on!) So HOW can I get the Mac to do the same thing? Is there a 3rd party utility that can identify multiple monitors?  I'm using a Matrix DualHead2Go to connect the two external montors to the Mini-DVI port on the Mac.
    Thanks!!

    I'm using a Matrix DualHead2Go to connect the two external montors to the Mini-DVI port on the Mac
    The behavior you describe in Windows is exactly how much multiple display system works but I have two graphics cards capable of driving two displays each. I believe you have identified the problem in the above sentence. I believe that the Mac sees the Matrix device as a single display and not the two displays themselves. With the two external monitors attached, open System Preferences and select the Displays tab. If the Mac OS sees the displays as two separate displays you should see a dialog in each of the monitors and on your MacBook Pro. If I am correct you won't see three display dialogs, you'll only see two, one on the Mac and one on one of the two external displays.

  • How do i run 2 external monitors on my mac book pro?

    so im trying to run 2 external monitors off my mac book pro and was wondering how and the best way to do it?

    Matrox.com has a device for that.

Maybe you are looking for

  • Macbook Pro starting to run slow

    Hi everyone, I have a macbook pro that is running Snow Leopard 10.6.8 with a 2.4 GHx internal core 2 duo and 4 GB of memory. I have had it for 2 years and its starting to run slowly. When it first boots up it seems to take forever and also when it sh

  • New iMac Can't See HD and screen goes black then grey then black..etc.

    Hi I've got a new 20" Alu iMac and it was working fine for the past 3 weeks. All of a sudden this morning starting it up the screen went completely grey then after a while the apple logo came on (I thought it was eventually starting) then it went com

  • Linking Vendors together to report on one vendor

    Hi Team, Scenerio example: 16 vendors across Europe in 16 different countries, but these are local vendor locations all part of one company, name "Vendor1". How can these 16 vendors all be linked for reporting purposes into one global vendor, so repo

  • Get image dimensions before onLoadInit

    Hi, I need to get the width and height of the image before it finishes loading with a moviecliploader instance. This is for placement of another clip, which will always load before the image. Is there any way of doing this??? onLoadStart does not giv

  • Photoshop Touch iOS Crash on Launch

    [ iOS - iPad 4 ] Initially I had no problems. I loved it. Everything functioned as expected. The problem started when I attempted to sync my file with CC! As soon as I choose sync, it crashed. Ever since then, it crashes instantly upon launch now. I