How do I overide the values in the text file

I am reading a text file using loadvars, to get some values
such as
&yourid=123456 from the text file.
How do I overide the values in the text file
<PARAM NAME=movie VALUE="jamietrailer.swf?yourid=65432
<---- this doesn't seem to work
So I can change the values from the html file?

I want to do this:
# It should look like this:
<PARAM NAME=movie VALUE= "movie.swf?text=hello">
# Find the EMBED tag. Look for this:
<EMBED src="/support/flash/ts/documents/movie.swf"
# Again, replace the filename "movie.swf" with
"movie.swf?text=hello".
It should look like this:
<EMBED
src="/support/flash/ts/documents/movie.swf?text=hello"
Is this supposed to overide the value I am reading using
loadvars?
or do I have to not read the value from the file if I am
going to give it a value in html?

Similar Messages

SQL Loader-How to insert -ve & date values from flat text file into coloumn

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide.

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide. Try something like
someDate    DATE 'DDMMYYYY'
someNumber1      "TO_NUMBER ('s99999999.00')"
someNumber2      "TO_NUMBER ('99999999.00s')"Good luck,
Eric Kamradt

How can i insert the text file in a hashSet???

Hi, here's the code to feed the text file into the program, i need to put the words from the text file into a hashSet, im not too sure how to go about doing this, can anyone help please?
import java.io.*;
public class FileIn {
BufferedReader in;
public FileIn() {
try {
in = new BufferedReader(new FileReader("\\C:\\Program Files\\java.txt\\"));
String line = in.readLine();
System.out.println(line);
in.close();
} catch(IOException ioe) {
System.out.println(ioe.toString());
public static void main(String args[]) {
FileIn newFile = new FileIn();
}

First you need to break each line into words. You'll need to decide on your rules for doing that. A simple approach would be to just break on whitespace. This assumes there are no hyphenated words at the end of a line. You'll also want to strip out punctuation.
Once you've got a word (or an array of them, if you used String.split), then just iterate over it and call HashSet.add for each one. There might even be a helper function in java.util.Arrays or java.util.Collections or in HashSet to add everything from an array.
http://java.sun.com/docs/books/tutorial/collections/

How can i read the text files and buffer the data in Vector?

hi. I have been running into this problem for days, but with no luck and losing right direction.
The problem is : I am trying to read a text file and buffer the data into a
Queue for each user.
the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
17 8 2 18 512
18 9 2 19 512
19 10 2 20 512
20 1 3 21 512
21 2 3 22 512
22 3 3 23 512
23 4 3 24 512
24 5 3 25 512
25 6 3 26 512
26 7 3 27 512
27 8 3 28 512
28 9 3 29 512
29 10 3 30 512
30 1 4 31 512
31 2 4 32 512
32 3 4 33 512
33 4 4 34 512
34 5 4 35 512
35 6 4 36 512
36 7 4 37 512
37 8 4 38 512
38 9 4 39 512
39 10 4 40 512
40 1 5 41 512
41 2 5 42 512
42 3 5 43 512
43 4 5 44 512
44 5 5 45 512
45 6 5 46 512
46 7 5 47 512
47 8 5 48 512
48 9 5 49 512
49 10 5 50 512
50 1 6 51 512
51 2 6 52 512
52 3 6 53 512
53 4 6 54 512
54 5 6 55 512
55 6 6 56 512
56 7 6 57 512
57 8 6 58 512
58 9 6 59 512
59 10 6 60 512
60 1 7 61 512
61 2 7 62 512
62 3 7 63 512
63 4 7 64 512
64 5 7 65 512
65 6 7 66 512
66 7 7 67 512
67 8 7 68 512
68 9 7 69 512
69 10 7 70 512
70 1 8 71 512
71 2 8 72 512
What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
I already created a class called Class packet:
public class packet {
    private int timestamp;
    private int user_id;
    private int packet_id;
    private int packet_seqno;
    private int packet_size;
    /** Creates a new instance of packet */
    public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
        this.timestamp = timestamp;
        this.user_id=user_id;
        this.packet_id=packet_id;
        this.packet_seqno=packet_seqno;
        this.packet_size=packet_size;
}then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
any idea and sample code will be appreciated.

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Pass the text file name to the command prompt using servlet

hi to all,
I have a HTML page that takes the user inputs. Once the user clicks on the submit button on the HTML page, these values will be capture by a servlet and then store into a text file. A new text file is generated each time the user clicks on the submit button.
Now, i need to call a command prompt window and then pass the text file name to another program for execution. Any idea how i can pass the text file name to the command prompt???
Thanx a lot....
kinki

hi, thanx 4 ur reply.
But i not onli want to display the file name on the Tomcat command prompt. I must also able to call up a program to execute the command. If i used System.out.println(); it onli display the value on the console windows. But not executing it... anyway where i can do it???.
thanx...
Kinki

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How to only read the last line in the text file by using BufferedReader ?

Dear all,
Hello, I am new to Java. Do anybody know how to read the last line (this is the last record) in the text file.The method I am now using is reading from the first line until I reach the last line in the text file. Thank you!!
BufferedReader br = new BufferedReader(new FileReader("c:\\sdk1.4.1\\bin\\dbExport.txt"));
DataInputStream in = new DataInputStream(new FileInputStream("c:\\sdk1.4.1\\bin\\dbExport.txt"));
String input;
String firstinput;
String secondinput;
int count=90;
int year=1955;
while ((input = br.readLine()) != null) {
firstinput = input.substring(0, 10);
secondinput = input.substring(10);
String insertStore1 = ("INSERT INTO AUTHORS " +
"VALUES ('" + count + "', '" + firstinput + "', '" + secondinput + "', 1955)");
System.out.println(insertStore1);
int result = stmt.executeUpdate(insertStore1);

I suppose you could use a java.io.RandomAccessFile.

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can i get the trace file

Hi,
I wanted to check the trace file to make sure that there is no login attempts happend through the forms with wrong username and password.
how can i enable the trace file , where i have to write the commands and where i can see the trace file.
I'm using oracle forms 6i
could anybody help me.
thanks
Bcj

This link is all about forms 9i, i'm working on forms 6i. but i have tried with following values
TRACE_LEVEL_CLIENT=16
TRACE_UNIQUE_CLIENT=TRUE
TRACE_FILE_CLIENT=Test
TRACE_DIRECTORY_CLIENT=c:\orant\net80\trace
in sqlnet.ora file and it created a trace file whenever it connected to database through the on_logon trigger.
if the username or password is invalid then the validations raise the form_trigger_failure exception. so there was no trace file. so i was unable to get the trace file to see the invalid login attempts.
Thanks

How do I Expand the Text Box in Mail Stationery?

I have a question about using stationery in Mail. Is there anything I can do to make the text box in certain templates to hold more content? It seems that, in some templates (like Bamboo, for example), the text box expands automatically as more content is keyed in. Yet, in the Tack Board template, for example, the text box does not expand beyond what seems to be a fixed length for content. How can I get the text box in Tack Board to expand for additional content?

Please check text input state defined , also if the form is inserted in any container then try to test out the form with different text input boxes in a new page.
Additionally , check the mid-hieght of text inserted in frame.
Thanks,
Sanjit

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How do I overide the values in the text file

Similar Messages

Maybe you are looking for