How do I overlay audio from interview clip over other video clips?

Help! I have some interview clips and want to over lay the audio from one of the interviews over different video clips. For example, I would show video and audio from the interviewee and then cut to a clip or scene showing what the guy is talking about but still have the interviewees audio playing as a voice over on the cut-away clip. How do I do that?!

Welcome to the forum.
Is this Audio muxed (combined into a Clip w/ both Audio & Video), or is it a separate Audio-only file, that has been Imported into your Project?
If the latter, just drag an Instance of it to a free Audio Track, and position, as is needed. Note: each Instance of a Clip can have different In & Out Poiints, so you are not limited to them being identical.
For the former, the muxed file, there are a couple of ways to do that, but possibily the easiest is to Alt-click on the Audio part of the Clip (temporarily unlinks the Audio & Video), and Ctrl-C (Copy), then move the CTI (Current Time Indicator/Playhead) to the end of the Timeline, and press Ctrl-V (Paste), for as many Instances of that Audio, as you need. Then, drag them to an empty Audio Track, while holding down the Ctrl key for an Insert Edit, rather than a Ripple Edit, so as to not affect anything on that Track, below the desired Video Clip. If you are replacing the Audio.
Another way to do that is to use an audio-editing program to rip the Audio, Save as a PCM/WAV @ 48KHz 16-bit file, and then Import that into the Project, for use in many Instances.
Good luck, and hope that helps,
Hunt

Similar Messages

  • How can i leave audio from one clip playing, while showing another one in i

    i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
    just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

    This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
    [See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

  • How do I extract audio from a clip?

    I've tried to select a clip in the timeline then go to clip/audio optins but audio extract is always grey...  I'm trying to pan audio into the next clip.

    No need to extract it to apply fx or mix / pan it.
    I f you want audio only from a clip ...you can drag clip to Source Monitor and then Drag Audio Only from there to Timeline / sequence

  • How do you overlay the audio from a clip over a iphoto slideshow clip ?

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    I want the audio from a video clip to be playing over the jpg/slideshow iphoto images ...so you see the slideshow elements but do not see the clip but do here the audio !
    thanks ! HELP!

    How do you overlay the audio from a clip over a iphoto slideshow clip ?
    "Command-Shift-Drag" the Event clip containing the audio you wish to extract and "pin" it to the slideshow already in the Project window.

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • How do I use just the audio from a clip in imovie? No picture, no video, just audio!

    I want to put the audio from a clip at the end of the video. No video, just black screen

    It will require a bit of a workaround. But it can be done. If you enable Advanced Tools under the iMovie Preferences (Go to the iMovie Menu > Preferences). Enable Advanced Tools by clicking the checkbox.
    Now create  a title with a black background by dragging at title to the end of the video on the Project timeline. Once the title is there, delete all the text on the title. Now drag that black background directly dead center onto the video clip just before the end where you want to 'blot out' the video and just have audio. When you release the mouse, you will be shown a pop-up menu with a bunch of different options including one titled cut-away. Choose this option. What will happen is the video will cut to the black video background you dragged on top of the video clip. You can set the duration by dragging the left and right edges out further to make it run longer. This black back ground effectively cover the video and will continue to play the audio of the underlying video clip.

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • How can you rip audio from video

    How can you rip audio from a video using Itunes 11.1?  I am using a pc win 8

    Possible in iMovie 08 with a lot of tinkering. Easy in iMovie 9 and iMovie 11 with drag and drop.
    See [Aaron's blog post for how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

  • How do I unlock audio from video in iMovie '11?

    I've transferred some old videos to iMovie '11 using an ADVC-55 and there are some places where the audio has slipped out of sync with the images.
    I have extracted the audio from these clips, so I can move it along the timeline to get it back into sync with the pictures - however, I cannot find how to unlock the extracted audio from the video, so I can move it along the timeline.
    I've tried everything I can think of and iMovie's Help function doesn't reveal the answer.
    This would have been easy in earlier versions of iMovie, but it's got me stumped in this version. Can anybody help, please?

    AppleMan1958 wrote:
    Just drag the audio left or right.
    Select a portion, then right-click/Split Clip, or EDIT/SPLIT CLIP. Then detach audio and drag it left or right.
    This was exactly my problem - that didn't work!
    I've realised now, though, that it was because I'd cut the clips so precisely that the audio couldn't be dragged either way - there was nowhere for it to be dragged to. I added some black space at the beginning and ends of the images and all now works OK

  • How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

    How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

    Attach camera via USB or put card in card reader.
    Go to FCP, and go to the Log and TRANSFER window.
    If FCP recognizes the card, you will see your clips listed on the left.
    You can view them, set Ins and Outs, and import just what you want.
    Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

  • How can I stream audio from Apple TV 2 to Airport Express speakers.

    how can I stream audio from Apple TV 2 to Airport Express speakers.
    I have LCD projector on one wall and connected ATV to it via HDMI.
    Speakers on the other wall and connected to APXpress.

    To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
    Now I've got something to do.

  • How do I extract audio from a movie?

    How do I extract audio from a movie I downloaded from iTunes and save it to my iTunes library to use as a ringtone?

    Do you have Qt Pro...?
    If not, you may be able to extract the audio with this free program:
    http://www.squared5.com/

  • Extracting audio from many clips at a time

    I have to extract some audio from many many video clips, so I was attempting to do it in one step, but Logic extract only from one clip at a time 
    So I'm thinking to use Audio Converter (it can extract audio from many clips in one step), but it ask me the AIFF encoding Bitrate (among 64 and 192 kbps). So I'm wondering... but Logic which AIFF bitrate manages???
    Tnks

    yes, it is possible. Infact, it is the normal practice to add those 10 roles to that single user in SU01 direclty.
    and as I said, user comparison should be scheduled normally in SAP system landscape to do the things automatically, however not immediately but after some time.
    http://help.sap.com/saphelp_nw04/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
    If you want user comparison immediately, then you need to do it manually in the role.

  • Suggestions for blending audio from one clip to next?

    I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
    Thanks.

    You can create a crossfade (essentially an
    audio dissolve) from one audio clip to another.
    With the audio track(s) targeted, park the Playhead at the
    audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
    You need to be sure you have sufficient 'handles'
    on both clips to accommodate the crossfade.
    Creating an audio crossfade
    http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

Maybe you are looking for

  • Is it possible to use multiple hard drives with iphoto?

    I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so

  • TV@nywhere master shutdown issue

    Help I bought a TV@nywhere Master card for my cousins pc recently, after installation of the card the PC (which is running Windows XP Professional) restarts everytime I want to shutdown. After much investigation it has occurred that it is the 'cx88au

  • Combining multiple pdfs and then adding info to the blank fields.

    i combined multiple pdf's together to make one package.  The forms had text field in each of them, when i combined them i tried to add text to the blank spots and the info autofilled from page one on to all of the pages.  I do not want this to happen

  • Nano says i have ussed 850 megs of space but there is no music on my ipod

    Help! My pc says i have used approx. 850 mgs of space, but there is nothing on my nano. when i turn it on all i get is a menu screen. This is what I tried... # Open the Control Panel. # Double click on Administrative Tools. Note: If you don't see Adm

  • Regarding Picking List SF

    Hi Am looking for an info regarding SF for <i>picking List</i> UK version where we need to call from TCode LT31, i found one at US version where i need to customize the o/p. My question is do i need to add on that package in order to utilize the pred