How do I part ion an external hard drive used for time machine?

I have a Seagate 1.5 T external harddrive I'm using for Time Machine. I would like to partition it so I can store other files and photos on it. How do I do it??
Thanks,
JD

In Disk Utility
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1725.html
Message was edited by: b j t

Similar Messages

  • How do I password protect the external hard drive used for Time Machine backup

    Can anyone help me to put password protection on the external hard drive I use to Time Machine backup my iMac internal hard drive?  I use Snow Leopard 10.6

    I think that was FileVault 1.  Starting with Lion (10.7) Mac OS X uses FileVault 2, which is whole disk encryption.
    Based on complaints seen in these forums, I would say FileVault 2's only complaint has been when people forget their password/encryption key (it seems an encrypted disk does prevent anyone without the password from accessing the data, including the real owner).  Otherwise it does not seem to be causing any serious issues.  Your Mileage may vary and objects are closer than they appear in your side view mirror (standard disclaimer).  Of course this is all academic while you are using Snow Leopard (10.6).
    There are other whole disk encryption packages available, such as PGP Whole Disk Encryption, HOWEVER, I would not advise it for your Mac OS X boot disk, as it has been known to be a problem when you try to install operating system updates or upgrade to a new version.  NOTE:  I have not seen PGP Whole Disk Encryption discussed much, ever since FileVault 2 came along.

  • External hard drive used for Time machine is full and having a hard time backing up. what should I do?

    External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

    For All things Time Machine see Pondini's Excellent Infirmation here...
    http://pondini.org/OSX/Home.html
    Start with FAQs and Troubleshooting.

  • Cleaning virus-infected files on external hard drive used for Time Machine

    I am kinda reposting this with some extra explanation since I didn't really get any good respnses on my first post:
    I am running McAfee VirusScan and it locates and cleans virus infected files just fine on my computer, but when it finds infected files on the external hard drive I use for Time Machine backups, it says "Repair Failed". Is there a way to clean infected files on my Time Machine backup drive?
    I had found a virus in several documents on my Mac, which I cleaned, but it seemed to infect a bunch of the files located in Time Machine as well. I know these files shouldn't harm my Mac, but I still don't like having virus infected files. They seem to propagate and I don't want to give them to any of my Windows-using friends.

    Hi,
    Usually (but not always), virus-infected files aren't system-related, so if they cannot be repaired, there should be an option in VirusScan to delete them or quarantine them instead of repairing them. Assuming that you are archiving Mac-related files and not archives of Windows files, then it should certainly be safe to just have VirusScan delete or quarantine them. An alternative is that you could delete them manually. But before you do any of this, be sure to take a look at the filename and its location in the folder hierarchy to make sure that you aren't removing a file that's critical to the operation of some piece of software.
    Hope this helps,
    Ken

  • External hard drive setup for time machine reading as a virtual cd

    Why is my MacBook Pro reading my external hard drive setup for time machine reading as a virtual cd?
    Thanks

    Hi Christian,
    Is this something that has happened from the start? If so, I would reformat the disk and setup TM from scratch again.
    Prepare the external HD by connecting to the Mac, open Disk Utility, select the manufacturer’s name of the external HD, select Partition and choose GUID Partition Table, format to Apple OS Extended (Journaled); quit Disk Utility.
    Open System Preferences.
    Click on Time Machine.
    Click on “Select Disk.”
    Click just to the left of "On" to turn TM on if it's not already on.
    Click on the disk or partition you want to use.
    Click on “Use for backup.”
    Leave external HD connected, and TM will automatically do its thing.

  • Are all external FW drives used for Time Machine more prone to fail?

    Within a period of just several months, I've seen three different external FW drives used for time Machine in three different locations fail terminally.  They were different brands (Seagate, OWC and a nondescript generic from Fry's).
    Is there something intrinsically different about how Time Machines disks function compared to plain data storage drives?  Or was do these three drives amount to just a coincidence?
    Thanks in advance.

    Bus-powered seem not as robust as self-powered.
    Soemtimes cables are flaky.
    How did you decide these drives are "terminal?"

  • On a 500G MBP running Lion what's the best size to partition a 2T WD external hard drive to for Time Machine? Thankse

    Just picked up a 2T WD external HD for my new MBPro with 500 G drive. Looking to use part of the external drive for Time MAchine. Not sur if I should designate 1T of it or 750G. I'm running Lion. What's the best way to format the external drive. Disk Utility?
    Thanks,
    Dennis

    Ask in Lion: TimeMachine / MacBook Pro even - this is workstation territory
    I would not use the same drive for data and for backups.
    If I had to, I'd make a partition large enough to boot your Mac from though, whether 50-500GB to clone your system. 
    You should still be able to use Lion's Recovery boot mode.
    I don't think there really is much choice in what to format with, unless you want to spend over $100.

  • External Hard Drive only for Time Machine?

    I just bought a 500GB external HD and just ordered Leopard. I'm wanting to use the hard drive for my iTunes library rather than keep it on the internal HD due to the size.
    My question is, if I then use it for Time Machine, will it be only for TM or can I do both?
    And if I can do both, will it erase what is currently on there while setting it up for TM?

    Apple doesnt recommend it, but it shouldnt be any problem. Time Machine creates a backup directory in which it keeps all the backup info. As long as there's space you can use the drive for other items. I have an internal 500GB drive I use for backup, and I keep some large files on it. The problem will be sooner or later the drive will just fill up with backup info, and time machine at that point will dynamically erase the oldest backups but will not have space for storing other files. Basically dont rely on the drive to have space for storing extra stuff. Partitioning the thing will prevent this, but it will make your backup drive smaller.

  • What size external hard drive needed for Time Machine?

    Can someone offer advice? What size external hard drive do I need to back up my system with Time machine? Hard drive is 232 GB but I'm only using 40 GB of the 232.
    Thanks.

    beach bum51,
    Hard drive space is cheap, so I'm going to recommend that you get something with at least 500 GBs capacity. 500 GBs would be twice the capacity of your internal, which is apparently the "recommended" size, so I have no hesitation recommending it. The larger the drive, the lower the cost per GB.
    What's not so cheap is speed. You'll be happiest with a drive capable of using the fastest bus provided by your computer. If your iMac has a Firewire 800 port, you'll get the best experience from using that port, and a drive that will use Firewire 800 transfer speeds.
    Scott

  • External hard drive partition for Time Machine wont mount

    I have an external HD that I've partitioned half for Time Machine, and half for external storage. Today the Time Machine partition wouldn't show up on the desktop. I checked Disk Utility and it recognizes both partitions, but the Time Machine partition is greyed out. When I selected it, in the stat list at the bottom it said "Mount Point: Not Mounted." I then clicked on "Mount" at the top, and after a bit a popup told me it couldn't mount and I should attempt to repar the disk. So I clicked "Repair Disk," and after a while, I finally got the message "Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    Why is only one partition affected? Can I reformat one petition but leave the other untouched? Are there any other options before I do this?
    One other item that is probably related: I've been having an issue with a flash drive that seems to constantly unmount itself, giving me "error, disk ejected improperly" messages. Earlier today I believe I had the same thing with my external HD.

    Why is only one partition affected?
    The drive malfunction that caused the problem only affected that partition.
    Can I reformat one petition but leave the other untouched?
    Yes.
    Are there any other options before I do this?
    This is not an option, it's mandatory: start a new backup on another drive. The one you have has lost data once already. If it were mine, it would be in the recycling bin now. You need more than one backup to be safe anyway. Apparently you have no backups at all of the data on the other partition. That means you're going to lose that data, sooner or later.

  • Relative size of external hard drive needed for Time Machine

    I have Time Machine up an running on an old 250Gb disk. My new iMac has a 500Gb disk, but lots of free space, so Time Machine is reporting adequate remaining space on the backup disk. Has anyone calculated the sort of ratio in disk sizes that will be necessary over time? For instance, with a 500Gb disk in the Mac, will a 500Gb external drive be sufficient for all time, or will it get full. Should be be considering doubling the external disk size to 1 Tb?
    I need to replace the 250Gb drive and am wondering what size is optimum.

    I've been seeing knowledgeable people writing that a good rule of thumb for "typical" home users is they should have a drive with a capacity of 3 - 4X their system's normal operating size...to maintain a full year's worth of Time Machine data before it starts scrolling off.
    So I guess that means I should be looking at a 1TB drive for my iMac which currently has ~250GB of data on it. Time to review that Bare Feats 1TB drive shootout (http://www.barefeats.com/hard94.html).

  • I would like to connect an external hard drive to my time machine and use it as a network drive to store itunes and iPhoto  how do i do this

    I have just purchased a new my book hard drive and would like to connect it to my time capsule and store my itunes and iphoto contentent there to free up space on my internal hard drive . Can this be done and what is the process?

    I'd like to store my Aperture /IMovie Libraries on an external hard drive.
    That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
    In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
    Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
    You must have backups on a different disk .. otherwise it is pointless.
    Can I set up a RAID 5 format for redundancy?
    No.. you can buy special USB and Thunderbolt external drives that support RAID..
    BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
    Raid will corrupt all copies of the files.. it is replicated across all disks.
    Delete a photo it is deleted across all disks.. you have no recovery.
    Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

  • How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

    how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.

  • HT201250 how do i add external hard drive to my time machine back up

    how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?

    To elaborate on above.  I am looking to add about 300gig of photos on an external hard drive to TC. 
    Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac? 
    Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
    My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please?

  • How do I restore a failed external hard drive using Time Machine?

    I have an external hard drive connected to my iMac that is being backed up with Time Machine.  I just realized that should it one day fail and no longer appear as a connected device, I'm not sure how to restore its data to another external drive.  When I disconnected the external hard drive (to mimic a drive crash) and entered Time Machine to see if I could verify that the external hard drive was, in fact, being backed up - I didn't know where to find it.  Under the Today (Now) information, I didn't expect to see it there as it was no longer connected to the machine.  But when I went back a few days, I expected to see its backup appear in the Sidebar.  But no!
    So - how do I restore a failed external hard drive using Time Machine?
    Searches for this information on Google yielded "iffy" results.  I'm hoping someone here is able to offer some clear steps to follow.  Perhaps I'm missing something silly.  Thank you very much!

    I came across this discussion after encountering the same problem. Since my internal HD was cose to full I added an additional external HD to my setup. I moved my iPhoto files to an external HD and backed both this external HD and my internal HD up with Time Machine to another external HD. So far the theory. When I wanted to test if this setup worked I noticed that I could only see my iPhoto libraries on the external HD in Time Machine when the external HD was connected to my computer, but not if I turned it off. This led me to search for a solution on the Apple Support Communities discussion board.
    The suggestions made Kappy seem right, at least in my experience, in that my Time Machine simply did not back up the external HD until I followed the steps he suggested above. These were the following:
    "So, if you want it backed up then here's what you need to do:
    1. In Time Machine preferences remove the external drive from the Exclude list.
    2. Verify that it is now included with your other drive in the backup list.
    3. Do a Backup Now to create a new backup of the external drive."
    After doing this, my external HD showed up in the Backups.backupd as a seperate folder. I could clearly see the Time Machine back-up for my internal HD and my external HD. In addition, in Time Machine itself I was able to find the external harddrive by clicking on my own computers name under "Devices". I hope my experience helps to resolve your issue as this discussion board has helped me resolve mine (which I believe to be very similar).
    Cheers!

Maybe you are looking for

  • Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8

    I purchased a CanoScan LiDE 220 scanner. My Adobe Photoshop Elements 6 & 8 do not recognize CanoScan LiDE 220, When I go to  File and import CanoScan LiDE 220 does not appear. Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8 Thankyou Ken

  • How to use search in new itunes

    When I search an artist in the new version of iTunes a window pops up and shows me all of the albums.  I can put all of the tunes on an album on play lists, but I can't for the life of me figure out how to see the individual tracks on an album any mo

  • PLEASE help!! my 2008 iphoto problem

    Hello. About a month ago i made the tragic mistake of deleting the iphoto application from my computer. Now i have gotten the '08 iphoto but when i install it, it tells me that: "Your photo library will not be readable by previous versions of iPhoto

  • No Printer Job List and No AutoQuit

    I have a Canon i70 printer. When I print a document the Canon i70 application automatically opens on my computer. However, when the job finishes, the application does not automatically quit as it used to in previous versions of OS X. The other proble

  • Window boundary on desktop

    I have created a hyperlink to an Adobe document (a map) in a Microsoft Access Database. When I follow the link to the Adobe documen t, I want the floating window that opens containing the Acrobat Proffesional 7 application to be at a specified set of