How do i partition my mac? please help!
I need to have a 32 bit processor partitioned on to my mac. i have looked around but cant seem to find HOW to do this.... Will i mess it up if i do? i would have to have to go back to a pc thank you!
What does this mean: "I need to have a 32 bit processor partitioned on to my mac."? This is makes no sense.
If you want to partition a hard drive see the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Partitioning a hard drive is a destructive process. Be sure to backup any files you want to preserve.
It might be more helpful if you could tell us what you really need to accomplish in a well-composed question. It's also helpful to provide more information on your system than just "MacBook." Which model, CPU speed, installed RAM, attached peripherals, etc.
Similar Messages
-
My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.
Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks. -
Switching from a PC to a MAC please help me get online!
okay so i just got my macbook and i am used to getting online from my PC. i used to just connect to my wireless network in my house, and then open up "broadband" connection, type in my username and password and i was connected, i cant quite find out how to do this on my mac please help me
also what is PPPoE?Make sure airport is turned on. There should be an icon in your menu bar that looks like an antenna or fan. Most of the bars should be black. Click on that and select "broadband" from the menu.
-
Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help
- Try another payment method.
- Contact iTunes
Apple - Support - iTunes - Contact Us
- Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
after the new softtware 6.1 on my iphone i losed my picture , how can i get back ? please help me
Try deleing the download and try again. It is located:
IPSW file location for Mac and Windows
If yo restore, the iPod will also be update. You can try that. Just make sure that you backup first so yo can restore from backup
iOS: How to back up -
I am new to mac please help me basic tips an trick to use mac
i am new to mac please help me basic tips an trick to use mac its very frustrating for any thing i have to call apple help line
any acesserious to macbook air 13 like any silicon case or carry case or some acesserious
i have delete contains of master folder of phothos still i can see phothos in my mac so how can i delete itApple has a site for new users. Use it. Also, David Pogue is an excellent tech writer who has penned a series called the Missing Manual. I assume you've come to the Mac from the Windows world and he's written one especially for switchers. I've linked to the version for Mavericks (10.9) but if you have an earlier version of the Mac OS he's written a similar book for them as well.
-
I installed lightroom 5 with a 30 day trial and it finished.
Yesterday I installed cc and when I open LR5 I need a serial number.
What do I do/how do I get one?
Please help, Thank you.Your photos remain in place, the catalog you have been using will remain. After you install Lightroom from the CC, all you have to do is open your existing catalog and continue right where you left off.
-
I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro. -
I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.
You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.
-
I'm battling to change my primary iCloud account on my mac, please help? I want to replace it with my secondary account by can't find a way to do this? Tony
System Preferences/iCloud - log out and then log in with your other ID.
https://discussions.apple.com/thread/3390335?tstart=0
Set up iCloud
Set up iCloud (2) -
I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs. -
as a new MacBook user, when inserting my USB Flash Drive, I do not know how to access its contents. Please help. Thanks.
Open a new Finder window, Finder > File > New Finder Window, and it should appear on the left under Devices.
If you don't see it there, or to get it to show up on the Desktop: Finder > Preferences... General tab, check External disks to have it show on the Desktop, Or Sidebar tab, check External disks under DEVICES. -
I downloaded Itunes to my computer today to update my ipod's ios (4.2.1 yes i know im way behind) but when i click check for updates it tells me my ios is the current one. How can i fix this? please help!
and at the same time....
I guess you can be glad that you at least aren't "way behind"!
Cheers,
GB -
i went to put music on my itunes from my ipod and it deleted most of my music off of it and i dont know how to get it back. PLEASE HELP ME. :-|
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If necessary, you can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my iphoto wont open since i updated my mac, please help? it says i need to install an iphoto library upgrader which I have installed but still cant see my photos.
What version of iPhoto are you using? 9.6 is the current version.
Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.iPhoto.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
I have all my itunes on one computer and have brought another and need to transfer all my music etc to new one, how do i do this? please help its doing my head in!
Hey allen72,
Thanks for the question. I understand you wish to transfer your iTunes library to a new computer. There are a few different options for doing so, the following article provides more information:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M.
Maybe you are looking for
-
Error during install of Essbase server on OL 6.3 ...
All tests are passed and all looks good until the actual install begins, then the following shows up in the log, and the gui shows failed (red X) on all installations. The wizard cannot continue because of the following error: could not load wizard s
-
Problem with updating Time component of an Oracle Date field in ALBPM
Hi. I'm new to ALBPM and am experiencing the following problem I hope someone can take the time to help out with. I'm using a Date and Time Picker element in a Form to enter the date and time information. Within ALBPM the date and time representation
-
I have a simple form. The form only has 3 fields on it:(Bank, Limit, Name of Guarantor(s) ) It supposed to 1. fetch the row 2. Allow user to update 3 fields 3. Update the row. I am getting an error on the fetch: ...Process "Fetch Line Of Credit": DML
-
How does one change the font of the page name (such as Welcome, About Me, Photos, etc.)? I can rename the page, but font type and size remain fixed. Is that an iWeb limitation or am I missing something? Cheers, Reb
-
One computer that I'm working on Dell Optiplex 960 with 4gb RAM is haning when I try and run a script. I created just a simple on to resize and image and it won't do that. Any ideas on what to look for to get this computer in line?