How do I pause the elapsed timer in keynote
I have made a Keynote Presentation and at the 90 minute point I want to have a 10 minute break
is there a way that I can PAUSE the "elapsed time Timer" in the presenters mode? and then restart it when I restart the presentation?
Each of my slides have notes that show me ( as the presenter) where I should be in the 3 hours presentation and If they dont come back from the break after exactly 10 minutes...then the times on my slides wont match the elapsed timer... so I'd just rather pause the elapsed timer..
any help is appreciated
is there a way that I can PAUSE the "elapsed time Timer" in the presenters mode? and then restart it when I restart the presentation?
No, the timer runs continuously to inform you the duration at any point in the presentation.
As this is a single presentation, the countdown timer must continue to provide accurate timing. If you have a break during the presentation at 90 minutes, and reconvene when the timer shows 100 minutes, you know exactly where you are in the presentation.
then the times on my slides wont match the elapsed timer
Change the information to show the correct elapsed time.
Similar Messages
-
How can I get the elapse time for execution of a Query for a session
Hi ,
How can I get the elapse time for execution of a Query for a session?
Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
Thanks in advance.Hi
You can use the dbms_utility.get_time tool (gives binary_integer type value).
1/ Initialize you time and date of beginning :
v_beginTime := dbms_utility.get_time ;
2/ Run you procedure...
3/ Get end-time with :
v_endTime := dbms_utility.get_time ;
4/ Thus, calculate elapsed time by difference :
v_elapsTime := v_endTime - v_beginTime ;
This will give you time elapsed in of 100th of seconds...
Then you can format you result to give correct print time.
Hope it will help you.
AL -
How can I display the elapsed time of the course using Advanced Actions in Captivate?
I have a Captivate course which is approximately 35 minutes in length. On each slide I would like to display to the user, the current elapsed time.
EXAMPLE:
25/35 minutes complete
The 35 would remain static, so I have been working with the elapsed time system variable in CP: elapsed:$$cpInfoElapsedTimeMS$$
I can't seem to get the variable to properly display the elapsed time in minutes, rather than miliseconds. Attached is a screen shot of my advanced action.
Can anyone provide guidence regarding how I should structure this differntly?I talked about that Timer widget in that blog post and pointed to another one:
http://blog.lilybiri.com/timer-widget-to-stress-your-learners
If you are on CP7, you'll have this widget also as an interaction, which means it is compatible with HTML5 output. Amd there is also an hourglass interaction, with similar functionality but... did not blog about that one
PS: Check Gallery\Widgets to find all widgets. Default path is set to Interactions -
How can I see the elapsed time on imported video?
I'm trying to make a video in iMovie 11'. I would like to be able to view the elapsing time of the song I imported so I can match video footage with audio. With the older version of iMovie, I could see a time clock on the bottom of the video I was importing, so I could match the mouth to the lyrics.
In the older iMovie version, the entire audio would play when only part of the clips had been imported by me. Now with this version, the song stops playing when the clips stop. So partial completion of the video, doesn't allow a full time clock of the total song to allow me to match the voice on the audio with the film of someone singing.
In short, I can't find the running time clock for the video player in the project library.
Can you help me with thsi? The help menu has not anweered my questions.
Thanks.
Dave DemoiseI agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request! -
How can I get the Elapsed Time express to output in milliseconds?
I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
Thanks in advance!I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
Attachments:
Example_VI.png 4 KB -
How can I see the elapsed time in an imovie project
I am submitting a video for my national board teaching portfolio, and I need to reference certain things in the video at a certain time. How do I identify the time of a particular frame?
I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod. All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
Consider this a feature request! -
How to keep Nano showing the elapsed time of song?
Hi,
I'm trying to figure out how to keep the page that shows the elapsed time / time remaining on instead of flipping back to the album artwork in 10 seconds. I need this function. any help would be appreciated.I don't think you can, sorry. But I have emailed Steve and sent feedback to Apple to fix various issues: http://www.apple.com/feedback/ipodnano.html
-
How to display the elapsed time of a video (event video) in Captivate 6
I have a Captivate 6 project which includes two separate videos and I am wondering how I can display an elapsed time for the videos - preferably one that stops if the individual stops the video.
Hello and welcome to the forum,
Are you talking about an inserted video, or about the Captivate file itself? I'm asking this because a lot of users refer to a published CP-file as a video.
'Elapsed time': is this the real time spent by the user, or the time as you can see in the TOC (developer's time)? I blogged once about the difference.
Lilybiri -
How to reduce the elapsed time on this query.
Oracle10.2.0.5 on AIX6.1.
Here is the awrsql report of a query for a one hour window.
Here UNBILLED has 120million records which is partitioned and subpartitioned. It has 10 partitions and 312 subpartitions. One subpartition has 10M records, 10 others have 1M each and 270 subpartitions have 360K records each. And 31 subpartitions are empty.
And BILLED has 300K records.
Looking at report you can see that out of 984 seconds, 958 is used for IO. Machine is PowerPC_POWER5 with 8CPU and disk storage on EMC.
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 984,327 5,561.2 28.6
CPU Time (ms) 40,760 230.3 29.8
Executions 177 N/A N/A
Buffer Gets 1,923,456 10,867.0 46.9
Disk Reads 203,832 1,151.6 25.1
Parse Calls 0 0.0 0.0
Rows 106,200 600.0 N/A
User I/O Wait Time (ms) 958,766 N/A N/A
Cluster Wait Time (ms) 0 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 0 N/A N/A
Invalidations 0 N/A N/A
Version Count 1 N/A N/A
Sharable Mem(KB) 31 N/A N/A
SQL_ID akg45a750sh0u
DELETE UNBILLED WHERE (MSG_ID, MSG_ID2,SPLIT_ROW_NUM) IN (SELECT MSG_ID,MSG_ID2, SPLIT_ROW_NUM FROM BILLED
WHERE BILL_REF_NO = :B2 AND BILL_REF_RESETS = :B1 )
Plan hash value: 3879210699
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Pstart| Pstop |
| 0 | DELETE STATEMENT | | | | 1 (100)| | |
| 1 | DELETE | UNBILLED | | | | | |
| 2 | NESTED LOOPS | | 1 | 112 | 0 (0)| | |
| 3 | TABLE ACCESS BY GLOBAL INDEX ROWID| BILLED | 1 | 65 | 0 (0)| 1 | 1 |
| 4 | INDEX RANGE SCAN | BILLED_XCB_BILL_REF_TRANS | 1 | | 0 (0)| | |
| 5 | INDEX UNIQUE SCAN | UNBILLED_PK | 1 | 47 | 0 (0)| | |
----------------------------------------------------------------------------------------------------------------------Is there way to improve the elapsed time( currently 5,561.2 msec per execution) of the query?
Thanks for your time...user1014212 wrote:
You're giving very interresting pointers.. Especially the one using the GTT table... Thanks...
I was also looking from a DBA point of view, say increasing the DB_CACHE_SIZE from 5GB to 8GB as the machine has almost 32GB memory out of which 13GB is free memory. Because the timed event is "db file sequential read" which takes 95% of Total Call time.
select * from V_$SGA_TARGET_ADVICE;
post SQL & FORMATTED results using tags -
The elapsed time problem !!
Hi ! am working on a program that calculates the elapsed time (for the needle of the gauge to reach a value which is previousely defined) also the elapsed time while the needle is maintained at the same value, which means there are two time counters, the first one stops when i reach the value and the second one stops when i leave it.
everything works except that when i reach the value the needle gets stuck there and can't be moved so the second timer doesn't stop.
regards...
AR
Solved!
Go to Solution.ABDESLAM wrote:
the program does exactly what u just said !
but i don't understand the number 3 sentence.
well am working on a project on a link flight trainer and i want to calculate the time that the pilot takes to go from 0 to 30 degrees for example on the Attituge gyro indicator then it calculates the time while he's maintaining this value.
dial2 = the handle of the simulator
AGI = attitude gyro indicator ( it indicates the degree of turn of the plane)
i hope u understood what's it all about
thank you
What he's trying to say is he doesn't understand why the time delay is hanging off the end of the while loop like that. Since it won't execute until after the first while loop is complete, what does it do? If you're hoping it will induce a wait in between the two while loops, it might accidentally work that way, but since the second while loop and the time delay are running in aprallel, there's no way to determine which will happen first.
BTW - if you already know what the code does, what, exactly, is your question? How does what it is doing differ from what it should be doing?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
How could I measure the excution time of the VI
hiii
I need to measure the execution time or the elapsed time of the prog in LabVIEW , I know that this time is very small but I need to calculate how much it is?
are there a suitable vi to do this in lib of LabVIEW or we must build it?There is an integrated tool, the VI profiler, Darren presents it here.
You can also find usefull info if you go on the LabVIEW community and search for "VI profiler" or "performance", you'll find all sorts of articles, blogs that can help you : https://decibel.ni.com/content/search.jspa?peopleEnabled=true&userID=&containerType=&container=&spot...
Hope this helps
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!" -
How can I activate the Billing Timer icons (Go, Pause, Stop)
in MacFreeLance 3.13? They are "grayed out" and unresponsive. MacXware Support Suite has not provided a solution.Lack of support from that company seems to be a non-uncommon problem. But it's not a problem you will be likely to get help with in the Communities, and definitely not here in the "Using Apple Support Communities" forum which is for questions about the Communities themselves. If MacWare can't or won't help you, you may be stuck, though there was an email address posted in this thread:
http://www.facebook.com/Macware/posts/327848817260562?comment_id=4108331
that may get you a response.
Regards. -
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?
On my HP Touchsmart 310 PC how do I increase the inactivity time on the display? Windows 7, 64-bit
Hi,
Please try Control panel > Power options > Change when the computer sleeps
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How can i use the airport time capsule as a external hard drive?
how can i use the airport time capsule as a external hard drive?
Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries. -
How do I determine the # of times a song has been down loaded; 7 is max?
How do I determine the # of times a song has been down loaded? Is 7 max?
Jim, I apprecite your help. Im still lost...not that efficient on computer. Some notes, If burn playlist to disc doesn appear in the menu, it means that the playlist you selected cant be burned to a CD because it contains items that have usage restrictions; if the playist contains itunes store purchases that are not itune plus songs, you can burn the playlsit to a CD up to 7 times; DRM - Digital Rights Management???? Any help is appreciated Thank You
Maybe you are looking for
-
How do I open a Crystal Report from Microsoft Access?
I'm looking for step-by-step instructions on how to launch a Crystal Report from a Microsoft Access application (for a dummy like me). My Crystal Report uses a connection to the Access database as the data. I have Microsoft Access 2002 with Microsoft
-
I get this message quite often. I know the urls are valid because I visit the websites everyday. People have told me that maybe Firefox just doesn't support those websites very well and to try a different browser. It's driving me crazy. Any ideas?
-
My BB Curve 8520 is 3 weeks old and yesterday morning it just turned blank white with a black line in the middle of the white screen. I can receivecalls and messages but can't view them. It goes blank after it goes idle. But after sometime the home s
-
Blackberry Desktop Manager Version 6 Download Needed
A few months ago I read a post that had a link so I could download Blackberry Desktop Manager Version 6 for Windows. Does anyone have access to a link? Cheers, Steve Solved! Go to Solution.
-
Why is the Rows Fixed in a Table in Smartforms?
Hi, I am new to smartforms. This one particular Smartform has a Table defined in the Main Window. In the Data Tab of the Table under the Loop heading an internal table is used to pass information to the Table. There is no Loop defined. Only the T