How do I perform a partial reset on 6500A All-in-one

Officejet 6500 E710n-z (2A98C5), Maac OS 10.8.2-- My printer doesn't always print after it goes to sleep. I have to turn it off and then turn it back on again. I was told at one time to perform a partial reset, but I have forgotten how to do that.
This question was solved.
View Solution.

There are a few things to try here, nancybl.
Try performing a Hard Reset:
* Unplug printer while the unit is powered on
* Unplug other end of power cord from direct wall outlet
* Wait 30 seconds
* Plug unit back up for power
As well, try turning Energy Save Mode off:
* Press the right arrow while on the home screen of the printer
* Select the Setup Menu
* Scroll to and select Preferences
* Scroll to Energy Save Mode and select it to turn this feature off
Also, please check your inbox messages.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

How can I find duplicate photos without going through all 5000 one at a time?

How can I find duplicate photos withough going through all 5000 one by one? I have numerous duplications and used to be able to click on Edit and Find Duplicates and could clean up all the duplicates easily. Now that option is gone. I still have lots to delete.

I do backup everything using Carbonite.Please don't tell me it is bad, too :-) Also, especially with photo files, I do have other backups of those I am concerned about. Probably not the best in the world, but a log better than many people who I know about.
Again, I really have not seen any problems with MacKeeper. I imagine that if people do not read and follow instructions, they could have problems. For example, it is possible to scan all your files and see them in order of size. If you start deleting things, without knowing what you're deleting, you could cause trouble. Even when the computer scans for so-called junk files, you can look at them and decide for yourself if they are truly junk. I've never seen any that were not.
So, I will look at the complaints anyway to see them. I am open to change, although I hope I do not need to drop Mackeeper as it does things like keeping tracking of applications updates that I need. Please note that I definitely am not a MacKeeper employee or anything close. Just using it and happy with the the results.
I did download the recommend file for finding photo dupes and ran it. There were very few duplicates, in any case, As I said before, the MacKeeper dupe finder was very slow when I ran it over ALL my files. That was a year ago and it did find many non-text dupes.

How do I go about deleting mulitple song files all at one time as opposed to deleting them all individually off of the latest version of iTunes

How do I go about deleting mulitple song files all at one time as opposed to deleting them all individually off of the latest version of iTunes?
Also I have tried authorizing my computer to play the songs I purchased off of iTunes when I had an iPhone 4 and it will not allow me to play them whatsoever. I now have an iPhone 5 and wish to load these past song purchases onto my new phone. How do I solve this issue?

what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser. You can export multiple sequences/clips at full resolution with this.
This has been available in fcp for a long long time.
Wow, you are right. Now that you mention it, I can't believe I never noticed that. Thanks.
Only if you have the 'Self-Contained' box checked. Otherwise you'll end up with a reference movie.
Correct. That box is typically checked by default. There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

How can I perform a factory reset on an Apple TV over a network from another room?

I would like to either perform a factory reset or erase user account information on a third generation Apple TV located in another room preferably over a network. This would allow me to manage the devices off site over IP with different people using the device and setting up their accounts for Netflix etc. Is this possible? I have heard of this being done without jailbreaking and I am curious to how they have done it.

Thanks Brian. It looks like the Apple Configurator app will reset settings and account info. I will look into third party apps as well. It needs to be as simple and quick as possible as we would be doing it daily to many ATVs.

How do I perform a factory reset on my ThinkPad tablet?

Question
My tablet has been reasonably unstable from day 1, even pre-installed apps like ebuddy force close, I have tried removing and reinstalling the app but it still force closes immediately. I also have a heap of other apps that force close on my tablet but run fine on colleagues tablets (4 of us bought them together)
How do I do a complete factory reset on this thing, I don't want just my data removed I want a fresh Android install.
AnswerTo perform a factory reset:
Power the unit off.
Then hold the power button until it gives you the short vibration
Right when it does, hit the VOLUME UP button a couple of times. (This may take a couple of tries.)
This will bring up a menu that includes a full factory reset.
Use the volume buttons to move the menu selection and the power button as the "enter" key.

i tried to install an update and now i have nothing but a tablet with a running logo. i have read everything on this site and i am very confused about what to do. i have tried several suggestions (wiing the cache, data and trying to reboot) but i get nowhere. i am not great with the computer stuff so past the relatively simple steps i get lost inthe tech language. going to a site and downloading to a SD card would be easy if there was just one place and not so many different ones that have multiple options and steps. Is there a simple explanation as to what i can do to get my TPT1 working again? i dont know why Lenovo doesnt have a something to download on their website since getting bricked seems to happen often. I called tech support and got told they couldnt help me as it was out of warranty and a new board is $575! All they offered was what is in the manual which doesnt cover this situation as factory restore doesnt work. i really would like to get it working again.LAlady

How do i remove the printhead on hp 1600xi all in one printer?

I keep getting the message remove and check cartridge on the display of my hp 1600xi all in one printer. I've replaced the ink cartridges. Turned it off, and on. Unplugged it, and plugged it back in. I still get that message. The only other thing that I can think of is to replace the printhead. Any suggestions on how to do this?

Hello jrfirepup, and welcome to the HP Forums.
I see you are looking into printhead options. This particular model of printer has built-in printheads, making them non-removable.
I would recommend removing the cartridges and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest this document on Ink Smears or Streaks.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HOW DO I INCREASE THE SIZE O MY 7640 ALL IN ONE PRINTER

HOW CAN I INCREASE MY FONT SIZE IN MY HP 7640 PRINTER

Hello jrfirepup, and welcome to the HP Forums.
I see you are looking into printhead options. This particular model of printer has built-in printheads, making them non-removable.
I would recommend removing the cartridges and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest this document on Ink Smears or Streaks.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to use the scan function on a 4215i all in one printer

How do I use the scan function on this printer with windows 8. I did the installation but the scan function does not seem to wwork
This question was solved.
View Solution.

Do you have the Officejet 4215 series All-in-One printer?
If so, then there is no full feature driver for the printer. The printer is installed using the Windows Update menu of the print drivers. For information about using the Windows Update driver click here.
Do you have this printer connected via USB? If so, then there are workaround methods to get the printer to scan, as the old software package is not available on Windows 8. In the document linked above, scroll down to the section on how to scan with the Update driver to find information on how to perform these types of scans. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dll Without a Disk?

How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop) AND a safe version of wsnmp32.dll -- Without a Disk? A tech took the driver off my laptop and I now have no printer/scanner. Help!!
Much thanks!

Hello,
I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

How do I scan on my HP deskjet 1510 all in one series? Theres' no button on the printer?

there's no scan button on my hp deskjet 1510 all in one series printer? how do I scan?

Hello,
If you go to the following location and identify what PC operating system you are using, it provides instructions on how to scan to your computer:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=26675&tmp_task=useCategory&cc=us&dlc...
I work for HP, However, I am speaking for myself and not for HP

How to connect my iPad to wireless dest 3511e all in one HP printer

How to connect my wireless printer to my iPad HP dest jet 3511e all in one SN [Personal Information Removed]

Hi Alicerief,
Welcome to the HP Support Forums. I understand that you would like to know how to print from your iPad to your Deskjet 3511 printer.
Your printer is AirPrint and ePrint capable so you should be able to use either method to print once your printer is connected to your wireless network. The instructions on connecting your printer to your wireless network can be found in your user guide. You can designate it as a wireless printer during the setup as detailed in the section "Traditional wireless connection" on page 32. If you have already installed your printer onto your computer using a USB connection, the instructions to switch to a wireless connection can also be found on page 32 in the section titled "Change from a USB connection to a wireless network".
I have included several reference documents for you. The first one reviews printing from an Apple mobile device to your printer. I have also included the document on how to setup ePrint and customize the printer's ePrint email address. There are two mobile apps available from HP that will allow you to send print jobs to your printer, the HP ePrint mobile app and the HP All-in-One Printer Remote app. The AiO app will also allow you to scan from your printer to your iPad. I have included the FAQ documents for both apps.
HP Deskjet 3510 e-All-in-One Series User Guide
http://h10032.www1.hp.com/ctg/Manual/c03471705.pdf
Printing from an Apple Mobile Device
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02796271
Setting Up a Custom Email Address for ePrint
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02940150
HP ePrint Mobile App FAQs
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
HP All-in-One Printer Remote Mobile App FAQs
https://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How do i enlarge print Size on HP Photosmart All in one

Print comes out small when i print

Hello there! Welcome to the forums @Malcolm111
I read about how your prints are printing out small, and would like to help you. I have some questions for you, so I can better understand the situation and work on having it resolved for you!
Please let me know, and try:
When you print from Notepad, is the font also small?
Which programs or web browsers seem to be showing you the issue?
Have you tried uninstalling and reinstalling the printer software and driver?
Which printer model do you have?
If you have an "all in one" printer, can you make copies successfully?
Please run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results!
I hope to hear from you with the results and information!
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Power Reset error message All-in-one 6310xi

I have an Officejet All-in-one 6310xi. I have had it for several years, and it has worked well. Recently, for no apparent reason the on/off button will flash and the message "power reset" will appear. If I restart the power, it will restart and work for a while but the error re-appears. For a long time it was plugged into a power strip. Since this problem has appeared I have plugged the printer directly into the wall, but the error still occurs. I have tried a full reset, pressing 6 and 9 and restarting the system to no avail. I have tried replacing the power cord to the wall. Any suggestions?

Try a different wall jack. Make sure the printer is plugged directly into the wall jack and not into a surge protector. Other than that you have done all the resets I can think of.
I was an HP employee
If I have helped you solve your issue please mark this post solved.

How can i change the region for the printer all in one

Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.

Welcome to the HP Forum!
mrmartin wrote:
Hp Deskjet 3050 series J610.
Error: Non Compatible Cartridges
i bought a printer all in one in mexico border, this had a 122 cartridges, but now i bought a new cartridges 61 in texas.
i install it but when i send to print appear a error that show "Non compatible cartridges", so i check them in HP site, the numbers are different like mexico and US, but the HP part number are the same for both, so i try to fix the problem i found a solution tha say that required change the region for the printer.
How can i do this?
Thanks.
You will have to contact HP to have the region for yourr printer changed. A representative will explain how to do it.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I clean the ink reservoirs an 1350 all in one?

I have had this printer for many years and love it. Even though I am on Windows 7 I found I could install it in virtual xp and it works in 7. I have heard alot about cleaning out the ink reserviors or replacing the absorbtion sponges but can't find how to do it. Can anyone help? All my research came about because the yellow ink slot on the print head seemed to be clogged and after trying everything I fould it still won't work. Thanks, trekcip

You will need to install the HP scanning software provided with the All-in-one. Once you have done that, follow the manufacturers directions, which should include using a USB or network cable to connect the HP to your MacBook.
Each scanner has different instructions, so the manu's instructions are the best to use. If you are having trouble after that, you would most likely get better response from the HP support sites.
Good Luck.
Adam

How do I perform a partial reset on 6500A All-in-one

Similar Messages

Maybe you are looking for