How do i permanently get rid of large folder that keeps showing up in my Pictures folder?

I have a brand new 1.7 GHz 13" mac book air with 4GB RAM running 10.7.2 and the 128GB hard drive keeps running out of space. I found a folder named 437937936196438674 4.22.50 PM in my Pictures folder that is roughly 40GB and after I throw it out another one shows up in it's place.
I'd really appreciate any ideas or suggestions. Thank you

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Similar Messages

  • TS1702 How do I get rid of an app that keeps showing up in my update que when I didn't buy it?

    I keep getting an update to an app I didn't buy, how can I get rid of it?

    Press and hold the app icon until it jiggles and an X appears in the corner. Touch the X and the app is deleted.

  • A process by the name of avgcmgr is loading the CPUs by up to 100 percent. At least 5 of them have appeared on the activity monitor. I've removed them with forced quit but they return! How do I permanently get rid of them? CPUA temp is now 194F.

    A process by the name of avgcmgr is loading the CPUs by up to 100 percent. At least 5 of them have appeared on the activity monitor. I've removed them with forced quit but they return! How do I permanently get rid of them? Three of these processes has now driven the CPUA temp to 194F.
    Ray

    Hi Ray-
    I'm having the exact same problem and have searched the web for hours looking for a solution (multiple spawned avgcmgr processes that consume cpu).
    Did you find any solution?
    Thanks so much!
    Steve

  • App Store World of Tank Blitz 6/27/2014 keeps coming back after it has been deleted.  How can I permanently get rid of it?  I have now said to I subscribe me from App Store emails because of this.

    Have been deleting the App Store World of Tank Blitz 6/24/2014 email daily/weekly, but it keeps getting sent to me.  How can I permanently get rid of this email?

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • I keep getting a notification that says "Google Talk authentication failed"...does anyone know how to get rid of this?  I tried looking for it in the apps but not really sure what google talk is or how to get rid of this message that keeps popping up.

    How do i get rid of the message that keeps popping up that says "google talk authentication failed"????

    funwidowlady,
    Good afternoon!  I'm glad I can be here to help with this error. In the device this application is identified only as 'Talk', so that be more familiar to you. First I recommend opening the 'Market' app on your phone, then Menu>My Apps to see if this application requires an update. It will display a list on top of all applications that need to be updated. If nothing exists, tap 'Home' and go into 'Settings>Applications>Manage Applications>Talk, then tap 'Clear Cache' and 'Clear Data' to remove the history of that application and stop the notifications.  The app will remain on your phone for future use, if you desire to take advantage of it. Read more about Google Talk here
    Thank you!
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • I do not want to update to Lollipop right now.  How can I get rid of the notification that wants me to install.  It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

    I do not want to update to Lollipop right now.  How can I get rid of the notification that wants me to install.  It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

    You cannot stop it from popping up.
    it will continue every few minutes until its installed.
    just keep using the back button near right side of home button.

  • How can I get rid of this message that keeps popping up: Widevine Media Optimizer Update Available? Don't know what it is but don't want it.

    How can I get rid of this message that keeps popping up:
    Widevine Media Optimizer Update Available? Don’t know what it is but don’t want it.

    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    You may have to log out or reboot in order to complete an uninstallation.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • HT2905 How do I automatically get rid of iTunes titles that don't link to any file? I have many duplicates and only 1 that "works"

    How do I automatically get rid of iTunes titles that are not "linked" to any file. I have multiple listings and only 1 or 2 that "work" for many songs...?

    Once an item enters the download queue, the user cannot remove it. If you can't get it downloaded, contact the iTunes Store customer support department through the form linked from the bottom of their Download FAQ web page and ask them if they'll remove the item from your queue for you.

  • How do I permanently get rid of Yahoo in the search bar?

    I "Manage Search Engines" and remove it, but every time I restart Firefox it's there again as the default. How do I get rid of Yahoo permanently? It is not my chosen search engine, and brings up very limited results.

    Nothing here works (1/22/2012). The only thing I could do was go to the Firefox tab in the left corner, go to Help, click Restart with Add-ons Disabled, wait for the little window to come up and check reset everything then click restart to make Yahoo go away. Of course my other tabs went away, but I had the URLs written down anyway. Now Google is my default engine again.

  • How do I get rid of the "personas" that keep coming up each time I open a tab

    I have downloaded the persona I want. Every time I open a new tab I keep getting various "persona" things coming up time that fill the whole page. How do I get rid of this?

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • How do I permanently get rid of snapdo from the pref.js file?

    The pref.js file in profile directory contains this line:
    user_pref("keyword.url", "hxxp://feed.snapdo.com/?p=mKO_AwFzXIpYRbPGr6JN_C9Okvk3V9BHMT-IkVs3ZQQWmwugvkecS8vMTddvQEc6wmyQ2ICdO6D2oVpOB4-8RjijafxhNW8n93-og7NtNom51wKx2rnKbOMMVtwkxytWmNixvkNvGHnMRycAA3fE[...]
    I have run several malware removers on this. adwCleaner finds and removes the line. But, after restarting Firefox it appears again.
    I have directly deleted this line from from pref.js but it reappears as soon as I re-open the file.
    I have made the file read-only which stops the file from being written again - for a while. A sequential set of files are then created, about 3 every time I start Firefox, with names like prefs-1.js.
    I let this run several days and eventually the prefs.js was change to RW and snapdo was back in!
    Something in my system wants to reset this line. IE and Chrome are not affected.
    How do I stop snapdo???
    Thanks

    Do you have a '''user.js''' file in your Profile folder?
    If so, is that pref in the user.js file?
    If so, remove that pref or just delete the user.js file which isn't a standard part of Firefox.

  • How do I permanently get rid of the dummy call forwarding icon on my iPhone 5? I have done a reboot and reset  and even an apple techy in the shop did not have a clue.

    Each time my iPhone comes on the call forwarding icon appears, without operating this function. Have been into the Covent Garden shop where we did a reboot and reset and that appeared to fix it, for a couple of days. Now its back, any ideas anyone?

    I wonder if it could be caused by something on your carriers end?
    Have you spoken to them?
    Matt

  • How do I get rid of this script that keeps hanging me up: Script: chrome://mozapps/content/downloads/downloads.js:1159

    My Macbook keeps hanging and then I get the window that says script is unresponsive. I can't equate it to any particular website because I have 20 pin apps and open dozens of sites a day.
    Can anybody tell me how to stop the madness?
    Thanks,
    B.

    Try to delete the file downloads.sqlite in the Firefox Profile Folder
    See:
    * http://kb.mozillazine.org/Unable_to_save_or_download_files#Manually_delete_download_history
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • How can I get rid of negative numbers that is showing as my wifi icon

    My iphone 4 is jail broken . randomly now my wifi icon is showing negative numbers

    This may not have been done by jailbreaking, you can also do this from field mode which is perfectly legit from Apple's point of view.
    Dial *3001#12345#*
    1. Your iPhone is now in the Field Test mode. Do you see a signal strength value on the upper left hand corner? You can still switch to the old strength bars instead of the number value, by taping on it.  You can revert to the bars any time by closing the app by pressing the home button. If you want to have the number indicator permanently (which is again reversible to bars), proceed to step 2.
    2. Hold on to the power button until you see the bar that says ‘slide to power off’. Here, do NOT power off your iPhone.
    3. Now press the home button again until the app is exited and you’re on to the home screen.
    4. To revert to the original signal strength representation, dial *3001#12345#* and press ‘Call’ to enter the field test mode again. Then press the home button once.

  • How to permanently get rid of Bing in Safari

    I would like to permanently get rid of Bing in Safari.    It keeps overriding Google.    I do not like Bing.

    There is no need to download anything to solve this problem.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

Maybe you are looking for

  • URGENT:- HFM 9.3.1 Workspace does not show the Studio changes

    Hi All, I am trying to make changes in a report in Hyperion Reporting Studio. After saving the Report in Studio if ran in the web i.e Hyperion Workspace, then it does not reflect the changes. This is only occurring for this particular report. Also ch

  • Ribbon controls don't always work in document library - SP2013

    Sometimes the Ribbon controls are greyed out in my document libraries, when you press the buttons, nothing happens.  This doesn't always happen though....sometimes the buttons work just fine.  Other times I get "This control is currently disabled". 

  • Service Procurement in Extended Classic Scenario

    Hi, We are planning to use SRM 7 EHP 1 with backend ECC 6 EHP 4. We are leaning toward the extended classic scenario. However we are a bit confused reading some documentation that saying Service Procurement classic can only be used in classic scenari

  • Problem with Doc type change in ME51n

    During ME51N, when I change the document type of PR system keeps on Processing/busy mode, takes long time (almost 5min) to effect the doc type change in drop down. there is no processing time taken if i enter the  the other data in the transaction li

  • UrgentError while running page

    Hi, I am getting below error while running my page, can any one help me what is the exact issue here. It's very urgent. ]] Root cause of ServletException. javax.faces.FacesException: java.lang.IllegalArgumentException: Cannot convert false of type cl