How do I permanently select black ONLY for printing....?

Hello! As you can see by the picture, every time I go to print something, "Color" is always highlighted by default, but I never ever want to use color, so how do I make it default black ONLY in this picture so I don't have to keep clicking it every time?

Welcome to the HP Forum!
I cannot see your image -- there is always a delay as an image awaits approval from the moderators.
Working blind, not knowing what kind of software, computer, or printer you have,
I can offer the following for you to try:
Control Panel > icon view > Devices and Printers >> Highlight (click) on your printer >>
Right-Click on that printer > Printing Preferences > Advanced >>
Under the header "Printer features"
Switch the following to read:
Print in Grayscale == ON
Print All Text as Black== Enabled
Click OK to save and Exit
==========================================================================================
Click the Kudos Star!
It is a great “Thank You” to the Experts who offer to help!
Kind Regards,
Dragon-Fur

Similar Messages

  • How can i use only black cartridge for printing documents

    i have today installed hp 1510 all in one printer, it uses ink from the both cartridges i just want to use black ink for printing documents, how can i do that
    This question was solved.
    View Solution.

    Hi @sandeepv 
    I can help you with your print settings, so the printer will print black and white only.
    If you have a Mac operating system, use the instructions below.
    Printing with the Black Print Cartridge Only option
    Click File and then click Print.
    Make sure your printer is selected.
    Verify that the Preset option is set to Standard.
    In the Copies & Pages menu, select Select Paper Type / Quality.
    NOTE:If this option is not available, click ColorSync. Then click the down arrow beside Quartz Filter and change the setting from None to Black & White.
    Select the Paper tab.
    From the Color option menu, select Grayscale.
    Select the Color Options tab.
    Select the Black Print Cartridge Only option.
    If that option is not listed, then it is not available. The printer will print using only the black cartridge, however, printing with one cartridge will be slower than printing with both cartridges.
    NOTE:To save the setting, click the arrow next to Preset and select Save As. Save the Preset option as Black Cartridge Only and then click OK. Then, the next time you want to print with just the black cartridge, select the Black Cartridge Only Preset.    -Source
    If you are using a Windows operating system, use the instructions in the following link. Although this document is titled Changing Print Settings in Windows 8 it can be used for other Windows operating systems. The navigation from Windows 8 to older Windows operating systems would vary, please let me know if you are using a different operating system and/or if you require additional assistance.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How to display the selection screen fields for selected checkboxes

    Hi all,
             I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
    and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
    Thanks
    sriman.

    hi,
    Try this code
    report z_13317_sdn2.
    tables : mara, marc, dd03l.
    parameters : p_chk1 as checkbox user-command ABC,
                 p_chk2 as checkbox user-command PQR,
                 p_chk3 as checkbox user-command XYZ.
    select-options : s_matnr for mara-matnr modif id A,
                     s_ersda for mara-ersda modif id A,
                     s_werks for marc-werks modif id B,
                     s_lvorm for marc-lvorm modif id B,
                     s_tab for dd03l-tabname modif id C.
    data: v_chk1,
          v_chk2,
          v_chk3.
    at selection-screen output.
      loop at screen.
        if screen-group1 = 'A' or
           screen-group1 = 'B' or
           screen-group1 = 'C'.
            screen-input = 0.
           modify screen.
        endif.
      endloop.
      loop at screen.
        if v_chk1 = 'X'.
          if screen-group1 = 'A'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
        if v_chk2 = 'X'.
          if screen-group1 = 'B'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
        if v_chk3 = 'X'.
          if screen-group1 = 'C'.
            screen-input = 1.
            modify screen.
          endif.
        endif.
      endloop.
    at selection-screen.
      if sy-ucomm = 'ABC'.
        if v_chk1 = ' '.
          v_chk1 = 'X'.
        else.
          v_chk1 = ' '.
        endif.
      endif.
      if sy-ucomm = 'PQR'.
        if v_chk2 = ' '.
          v_chk2 = 'X'.
        else.
          v_chk2 = ' '.
        endif.
      endif.
      if sy-ucomm = 'XYZ'.
        if v_chk3 = ' '.
          v_chk3 = 'X'.
        else.
          v_chk3 = ' '.
        endif.
      endif.
    Regards,
    Sailaja.

  • SCCM 2012- How to limit a collection membership only for specific count of machines

    How to limit a collection membership only for specific count of machines

    As I said you can use where SMS ID like %1 and see how many machines that gets you. If it's not enough do where SMS ID like %1 or SMS ID like %2. Keep adding a digit until you get ~5000. It won't be perfect though.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • How do i permanently block pop ups for certain sites

    how do i permanently block pop ups for certain sites

    According to this thread > http://www.techsupportforum.com/forums/f65/blocking-individual-web-sites-on-safa ri-226175.html
    You can use the Terminal app to block individual sites but be aware, unless you are familiar using Terminal, best to click your Apple menu  (top left in your screen) then click Block Pop-Up Windows from the drop down menu instead.

  • How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

    How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

    Hi el_giclee,
    Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
    I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
    Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
    It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
    Michael

  • How do I set a defauly orientation for printing?

    How do I set a default orientation for printing? 

    "Aperture has no such feature. The Apple web site has lot of downloads, some i'm sure should do what you want, in conjunction with Aperture. Allan"
    Allan where on the Apple website would such downloads be? This is news to me! LOL!
    Message was edited by: DVX100Shooter

  • How to make form field read only for users with certain permissions

    We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions. 
    Please give your suggestion on this. 
    thanks.

    Hi,
    See the link below:
    http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
    Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • How to use the select statement in for loop

    Hi All,
    my question is can we use select statement in for loop like as follows .
    for key in select key from one_table.
    when i am using this am getting an error like Found select invalid i identifier
    how to make use of select statement in for loop
    please suggest me .
    Thanks
    Sree

    SQL>set serveroutput on;
    SQL> DECLARE
         BEGIN
         FOR Cur_Rec IN (SELECT dname FROM dept) LOOP
          DBMS_OUTPUT.PUT_LINE(Cur_Rec.dname);
         END LOOP;
         END;
    SQL>
    ACCOUNTING
    RESEARCH
    SALES
    OPERATIONSAs per your requirement always filter the Query beforehand
    Like
    FOR Cur_Rec IN (SELECT key FROM <table> WHERE key=1) LOOP
    END LOOP;Edited by: Lokanath Giri on १ दिसंबर, २०११ ३:५६ अपराह्न

  • How to use Flash recovery area only for flashback database feature

    I would like to use flash recovery area only for flashback database feature, which means, flash recovery area will store only flashback logs.
    I dont want to use that file system for any other files, like archive log files, database backups, control file copies, multiplex redo log, etc
    is it possible? I want to use this feature only for flashback database option and hence i dont want to disturb any existing configuration in my database
    including backup jobs. Is it required to store archive redo log files also in flash recovery area to use the flashback database feature?
    I certainly can't afford to have a copy of entire database in this file system as size of my DB is more than the flash recovery area file system I have.
    Thanks
    Sarayu

    user13312943 wrote:
    Aman,
    I think i was not clear in my question. Let me try again
    My only requirement is to use flashback database feature (or be prepared to use if required). I dont want to create a large file system to use this FRA to store all these files. Out of all the files being stored here copy of data files seems to be consuming more space. I see these files are classified as transient and permanent files. I am okay with permanent files. I fear that this file system may consume more space if i store backup files on disk. I want database backups to go to tapes, not to the FRA disk. Is it possible?
    Thanks for your reply
    Okay, well in that case you can use RMAN and push the backups to the tape drives. FLB logs would be stored on the FRA.
    Aman....

  • How to enable Client Cert Required, only for certain URL's in the webserver

    WE are using netegrity siteminder for authentication and their plugin is executed as AuthTrans function. If I enable clientauth in server.xml ( which is basically turning on the client cert required for entire site), everything works fine. But If I want to turn that on only for certain URL's how do I do that.
    I tried turning global clientauth off in server.xml and tried using PathCehck fn"get-client-cert" in obj.conf for the URL's that need client cert, but the problem is AuthTrans is getting executed first and my netegrity plugin is throwing an error saying it cann't find the cert.
    What are diffrent options to enable cert required only for certian URL's.
    Thanks

    What is the condition you want to match?
    You can use get-client-cert in If tags in Web Server 7.0 :
    For e.g. If the condition is matched, This gets a cert, requesting it if it is not already present and failing the request if it can't obtain an acceptable cert only on POST requests.
    <If $url ~="*abc*>
    PathCheck fn="get-client-cert" method="POST" dorequest="1" require="1"
    </If>
    or
    <Object ppath="*abc*">
    PathCheck fn="get-client-cert" dorequest="1" require="1"
    <Object>
    for more details :
    http://docs.sun.com/app/docs/doc/819-2630/6n4thbiek?a=view#indexterm-380

  • How to change the background color only for one HTML-Portlet?

    Hi all,
    I have created a HTML-Portlet in my root-page. The root page have a style: Main-Style.
    I want to change the background-color only for this one HTML-Portlet:
    <html>
    <header><title>Test</title></header>
    <body bgcolor="#999999">
    Test
    </body>
    </html>
    But this does not work...
    When I use the CSS, then it will change the background-color for the root-page too.
    Thans
    Leonid Pavlov

    could you try this
    <table bgcolor="#999999">
    <tr>
    <td>
    test
    </td>
    </tr>
    </table>
    I don't think you need <html><header><title>Test</title></header>
    <body></body></html> for your HTML-Portlet.

  • How to ignore SSL certificate warning only for a specific internal subnet?

    I understand my issue may be a little unique, but I am sure some people have come across it. I am working with some test gears that have either self-signed certificates or flat out invalid/expired SSL certificates. Since this is a lab/test environment I don't want to have to go through the trouble of generating my own certificates and load them on each test device, since they come and go quite a bit.
    Is there a way to tell Firefox to ignore SSL warning, but only for a given subnet? For example, if the SSL certificate is presented by anyone in 10.11.12.0/24, accept it without question, but if it's coming from anywhere else, check its validity.
    I doubt this will ever be a main feature for Firefox, but perhaps someone has come across an add-on that does this?

    I suggest you to ignore self signed certificates. You should get some low priced SSL certificates to prevent your website from warnings.
    I preferred to buy ssl certificates from reseller, as its low pricing.
    Some good resellers are:
    [http://servertastic.com servertastic.com]
    [https://www.sslrenewals.com SSLRenewals.com]
    and you can google it for more reseller list.

  • Applescript to select sheet 1 for printing

    I am writing a script to save as PDF and mail a numbers sheet document: I've got the PDF and mail parts at the ready. What I am lacking is a GUI script that insures I have the correct sheet selected for print.
    How might I select sheet 1 in the sheets scroll area (with Applescript)?
    thanks

    I think this will do what you want to select sheet 1:
    tell sheet sheetName   
      [code to save PDF, mail]
    end tell
    where sheetName is a string (i.e. enclosed in quotes) or is the number 1.
    This, of course, has to be within tell application and tell document 1.

  • Help with rich black color for print project, please

    We are using CS5 photoshop to create a 3ft x 8 ft vinyl banner. We've never created something this large for print before.  Included layers are a black to white gradient, a black filigree graphic from DigitalJuice, and black text (that was created in Illustrator by someone else).  We set the project up using CMYK.  The printer informed us that we need to change the blacks to rich black (C50%, M40%, Y40%, K100%).
    How is this best done?  I can see how to change the color picker to the rich black %, but this doesn't appear to change the blacks in the project.  Is there a way to change them, or to export the project with rich blacks?
    Do we have to begin from scratch - and if so, how do we get the graphics and gradients to the rich black color settings.
    Any help will be greatly appreciated -

    In RGB mode I can't create non - rich black. For example if I set the color palette to CMYK, choose C=0%, M=0%,Y=0%, K=100%, fill the canvas with this color, and then measure the color with the eyedropper, the color reads C=70%, M=68%, Y=64, K=74%.
    This means that if your document is in CMYK mode and you have blacks that read C=0%, M=0%,Y=0%, K=100%, converting the document to RGB and then back to CMYK these blacks will become rich. Though the numbers of the rich black my vary depending on how your color management is set.
    Have in mind that the numbers above preserve the tonal intensity of non-rich black when converted to rich black. If you want the numbers your printer suggested they will be fine for elements like text and flat colors but for things like photo images this will intensify the blacks and will alter the tonal balance appearance which may be not what you want.

Maybe you are looking for