How do I place a page in the body of an e-mail?

How do I place a page in the body of an e-mail like an advertisment?

Muse is not the right tool for creating HTML content for e-mail messages. The HTML requirements of popular e-mail programs are very different from those of popular browsers.
It's clear there is interest in a WYSIWYG design tool for HTML e-mail, but Muse is currently not that tool.
You may have luck searching for HTML e-mail creation tools or using the tools that are part of e-mail campaign service providers such as Constant Contact or MailChimp.
If your requirements are simple, you may be able to do with simply an image in the e-mail that is a link to your site.

Similar Messages

How do I insert an image into the body of an e mail (not as attach)

I wish to put a picture in the body of an e mail, not as an attach.
How does this happen

In Gmail, simply drag & drop into the text area;
or mouseover the "+" in the bottom toolbar, then click the camera icon.

How do I place a file into the body of the email rather than as an attachment?

I sometimes want to include a file, such as a "card" into the body of an email rather than as an attachment so that it appears immediately upon opening the email. I did this successfully at Christmas, but cannot remember how to do so now.

The email specification doesn't allow that. PDF files, as for any content other than text or HTML, has to be sent as a link or an attachment.

How do I place a SubReport on the last page of a report?

Post Author: KPichelman
CA Forum: Crystal Reports
I am using CR 9.0 and C# to create a report. Now I need to place a subreport (a signature box) on the last page of the report and I seem to be having difficulties. I will not know the number of pages until runtime which I seem to be able to get using:
int rptLastPageNum;ReportPageRequestContext req = new ReportPageRequestContext();rptLastPageNum = oReport.FormatEngine.GetLastPageNumber(req);
Now, how do I place a subreport in the lower right corner of page "rptLastPageNum"? Is it possible to do it in the report itself or is there a way to do it in my C# code? One solution would be to put it in the footer of the report but unfortunately that doesn't work for us as there is another subreport to the left that will need to be shown next to our subreport, not above it.Thanks!!

Post Author: heathdallison
CA Forum: Crystal Reports
have you tried making a section in your report footer to hold your subreport and then using the section expert to make that supress using something like:{current page number} < {total page number}

How do I view more pages in the Folio Builder ACV preview?

I created a folio with an article that has two orientations, but when previewing it only shows the first page. How do I view more pages in the Folio Builder ACV preview?

You are viewing some very, very old videos. May I suggest watching my lynda.com course?
http://www.lynda.com/Digital-Publishing-Suite-tutorials/Adobe-Digital-Publishing-Suite-Ess ential-Training/149122-2.html?srchtrk=index:1%0Alinktypeid:2%0Aq:bob%2Blevine%0Apage:1%0As :relevance%0Asa:true%0Aproducttypeid:2
If you don’t have a subscription, this link will get you a one week trial? http://www.lynda.com/trial/boblevine
All that out of the way, clicking preview should take you to the page you’re on but still give you the entire article. Use your mouse to swipe up or down.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.

Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.

How to add an extra page to the index.html page on dreamweaver CS6?

How to add an extra page to the index.html page on dreamweaver CS6?

Index.html = your domain's home page. There is only one home page per site.
To create a new page from your index, go to File > SaveAs > filename.html. Repeat for other site pages. Add links on your index page that lead to other site pages.
See Creating your first web site in DW CC (5-part tutorial)
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

How to redirect a JSP page after the session is killed

Hello!
I am quite new to JSP. I have a question about how to redirect a jsp page after the session is killed. Could anyone help?
thanks a lot in advance!

You can't, directly. There's no connection betweenthe server and browser.
even after invalidating the session. we can do it
directly using the statement
response.sendRedirect("....");
or we can use the meta refresh tag.if session is invalidated and if we try to do response.sendRedirect(".. ") it throws IllegalStateException

When i clink a given link in google than that webpage open in another window. How i can open that page in the same tabe ?

when i clink a given link in google search than that webpage open in another window. How i can open that page in the same tabe ?

Hello gogotutu
In the [https://support.mozilla.org/en-US/kb/awesome-bar-find-your-bookmarks-history-and-tabs#os=win7&browser=fx17 Location bar], type [http://kb.mozillazine.org/About:config about:config ]and press '''Enter'''.
The about:config "This might void your warranty!" warning page may appear. Click I'll be careful, I promise!, to continue to the about:config page.
In the Search field, type [http://kb.mozillazine.org/Browser.link.open_newwindow browser.link.open_newwindow]
double-click and put as a value '''1''' , click OK to save it.
do the same with '''browser.link.open_newwindow.override.external''' , again put '''1''' as a value(it is -1 by default).
check also, always in about:config, the [http://kb.mozillazine.org/Browser.link.open_newwindow.restriction browser.link.open_newwindow.restriction] and put as value''' 0''' .
thank you

How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)

How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;

Abdelqader Alnobani wrote:
How can I make a part of the body of my content full width of the screen with a fluid grid layout in CSS? (In dreamweaver program)
and I know it is being over-ridden by
.gridContainer {
width: 88.5%;
max-width: 1232px;
padding-left: 0.75%;
padding-right: 0.75%;
margin: auto;
clear: none;
float: none;
Logically a structure something like below should work BUT whether or not it will upset the FG I don't know as I wouldn't ever use it.
<div class="gridContainer">
Top Code Section Goes Here
</div>

<div id="fullWidth">
Full width section goes here
</div>

<div class="gridContainer">
Bottom Code Section Goes Here
</div>

Why do I not receive iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail

I noticed this when I started my iCloud e-mail account a few months ago. I am not receiving iCloud e-mails when there is a specific group of "To:" addresses in the body of an e-mail. I can receive the e-mail on my outlook & local cable providor e-mail accounts with all of the addresses listed. If I strip out the "To:" addresses and send it from my local cable providor e-mail account to my iCloud e-mail account than I will receive the e-mail in my iCloud account (minus all of the "To:" addresses that are in the body of the e-mail. This has caused me to miss a lot of e-mails.
Following is one of the e-mail that I can send from my cable providor account and not receive it in iCloud. If I strip out all of the "To:" addresses I will receive it in iCloud. I have a case open with Apple but it is not going anywhere. This occurs from multiple sending internet service providors (ISP's) so I think it's an Apple iCloud e-mail processing issue.

I've been having a very similar problem to what ziemsen describes, for about a week now. The Mail app has stopped delivering new messages to the Inbox, even though I can view the newly incoming messages on the server via Webmail. I am able to send email through Mail with this email account, and as for the other email accounts that I have on Mail (which are also hosted by the same server), I am able to both receive and send email with no problem.
None of the mail settings have been changed, so how this happened all of a sudden is very puzzling. I have checked Account Info on the problem account - Mail recognizes that there are messages that are on the server yet to be downloaded, but it won't download them.
I've checked what other users have suggested here in the Discussions Forum, and tried: 1) deleting the problem Mail account from Mail and re-adding it; 2) creating a new machine User account and setting up Mail with that User; 3) setting up Mail on another machine; 4) archiving and re-installing OS, and even 5) wiping the HD entirely and reinstalling the OS. None of these have worked.
Ernie, your suggestion of deleting the MessageUidsAlreadyDownloaded file sounded like the solution to the problem, so I just tried it - but to no avail. Mail delivers messages that are on the server to my Inbox up until the same point that it always stops at, and there are almost 1000 new messages since then.
I am pretty lost at this point - I have no idea what else I can possibly do to resolve this problem. The strange thing is, when I tested my email accounts on Microsoft Entourage and Mozilla Thunderbird, they don't have this problem - both deliver all of my incoming mail. I may have no choice but to switch to one or the other at this point, but I'm attached to Mail and would really like to continue using it if I can. Any advice would be much much appreciated.
very best,
biteringo

In PSE 11 and Windows 8, why can't I type a message into the body of my Photo Mail?

In PSE 11 and using Windows 8, why can't I type into the body of my Photo Mail?

As I mentioned, the most common causes are other applications conflicting with the software. I'd recommend testing this: http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html

How do I place my counts at the bottom of the report on the last page

I produce a count using a summary column. I want that along with the text label to print on the last page at the bottom. How do I do this.
Howard

set a summery column at the data model level and change its property :
Function = count
source= empno
reset at =report
after that in the layout model u have set a text item at the botom or report in the main frame and u have to set one frame item and then in it set a text ietm.
Thanks
Md.Muniruzzaman Khan
email : [email protected]

How can I have two pages in the same Oracle Drive Path?

I have been using OracleDrive for some time to publish a specific kind of document once every week.
Now I have on my front page a content area that show the newest 3 of these documents. However, I'd like to place a link at the bottom that says "Show All", and that should link to a page that shows all my items in this folder.
So basically I want to have two pages that are based on the same folder..
How can I achieve this behaviour?
Thanks,
Botzy

Greetings,
When you say two monitors do you mean two separate computers (like 2 iMacs)?
If you mean 2 seperate macs then you could either:
Use a network keyboard / mouse sharing program like Teleport: http://www.macupdate.com/app/mac/14042/teleport
Use a physical KVM switch: http://www.belkin.com/IWCatProductPage.process?Product_Id=267031
Hope that helps.

How do I place an image over the header?

I am new to web design and new to Dreamweaver CS4. I have used 2 column template with header and footer. I have got a header title (an image) but I want to place an image to the left of it in the top left corner of the web page. I want the header region to be the height of the title as I want the image to have a greater height than the header area. When I insert the image it goes into the header region and the header automatically increases its height to fit the image. How can I overlay the image on the header rather than inserting it in the header? Any help would be appreciated.

Designing web pages is nothing like designing for print. To achieve what you want , you'll either need to create a special header image in Photoshop or Fireworks that contains white space and/or slices from surrounding images. Insert this new image into your header region.
Or, you could simply place image in the background using CSS. Then align your message text using CSS floats and margins. See demo below for an example.
http://alt-web.com/TEMPLATES/I-page-with-floats.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How do I place a page in the body of an e-mail?

Similar Messages

Maybe you are looking for