How do I place a still graphic in the same place as a flaash animation for devices that do not suppo

How do I place a graphic in the same place on the site that features a Flash animation for devices that do not support as in IPad?

Why not replace your Flash animation with a web friendly jQuery slideshow or rotating banner?
http://jquery.malsup.com/cycle/
http://wowslider.com/
http://nivo.dev7studios.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Similar Messages

How to play midi and update graphics at the same time?

hello
I want to begin playing a midi file and then immediately while the music is still playing I want to update the screen, for ex. panel.update();It now seems that that whole screen freezes until the music has finished. How can I simultaneously update UI and play midi. Please help. Thanx!
-Wonderful-

http://www.google.com/search?q=java+thread+tutorial
Plenty of tutorials and examples out there.

My new Ipad mini has the same name as my old Ipad. Now Itunes will not recognize either Ipad. Do I need to reset both or just the new one? How do I get them to have different names?

My new Ipad named itself the same as my old Ipad. Now neither will be recognized in Itunes. Should I reset new Ipad to factory settings and start over? How do I name it what I want?

To rename them go to Settings>General>About>Name.
Don't start all over again. There are solutions for devices that are not being seen in iTunes. Try those suggestions first.
http://support.apple.com/kb/ts1538

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

How do i get my itunes to be the same on my laptop, ipod touch and ipad???? ive sync'd them all, but each is still different, please help

how do i get my itunes to be the same on my laptop, ipod touch and ipad???? ive sync'd them all, but each is still different, please help

Syning with iTunes is completely separate from iCloud, except that if you have elected to sync calendars and contacts with iCloud you cannot sync them with iTunes.
What iTunes media are you having problems syncing to your iPhone?

TS2446 i cant remember the answers to my security questions. i have reset my password and added the recovery email account but still cant figure out how to purchase new content. it asks me the same security questions. how do i fix this?

i cant remember the answers to my security questions. i have reset my password and added the recovery email account but still cant figure out how to purchase new content. it asks me the same security questions. i also have a temp pin. how do i fix this?

If you've just added an address to your account then it will be an alternate/secondary email address, a rescue email address can only be added by answering 2 of your security questions. If you already had one on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email addressthen you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

My apple id was disabled. I followed the instructions, reset the password. But still gives me the same message. How do I fix it?

My apple id was disabled. I followed the instructions, reset the password. But still gives me the same message. How do I fix it?

Did you follow all of the instructions i.e. since resetting your password have you also logged out of your account on your device by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then logged back in so as to 'refresh' the account on it ?
If that doesn't fix it then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do I run 2 ipod nanos on the same itunes on the same computer?

Hi We now have 2 ipod nanos in the house, one 2nd generation and the other 3rd generation. How do we use the same computer with itunes set up for each nano's music? Many Thanks

No need to re-import CDs again. As long as the files are on computer in a directory accessible to logged in user then they can be added to library.
Files added in one library are not automatically added to any other library. Each library is independent of the others except in the case of deleted files. If one library deletes a file from library and disc then the other library will still have entry in iTunes but will have "!" next to it because the file itself is gone.

HT1451 Hi All, I have 2 users on my desktop, 1 i-tunes account and log-in but both users have different music contents i.e. one has the full iTunes library and the other only has some songs. How do i get both users to have the same music content?

I Have 2 users on my computer and both access i-tunes using same password etc. however 1 library has the full content of music but the other one has only partial playlists. How do I get both users to have the same full library?

The title of my initial post is a bit misleading. I already took a chance deleting one of the iPhones, hoping if I deleted the wrong one, I can still reauthorize it (all with the same Apple ID acct, so not subject to 90-day waiting period, right?) The iTunes database just updated itself, and it says I have 4 "devices" "in the Cloud", but 5 "computers" associated w my account. How can I find out what computers are associated? Isn't there a list I can see? I dont have a clue what computers they might be. If I use the "Deauthorize All" option, is it a pain to add them all back in. I assume I would have to log in from each computer to reauthorize each one. Would I have to be running the newest OS or version of iTunes to reauthorize? I think I have a PowerBook G4 Titanium with an older OS and iTunes. I'd like to keep that authorized, if possible.

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?

I am uploading receipts using the PURCHASE_ORDER_RECEIPT EIP. When I upload serialized assets each one is processed as a separate receipt (receiver_id). How can I have these all aggregated on the same receipt?
Is there a parameter I should be using in the XML or is there a setting in Peoplesoft that will accomplish this?
Jim

sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren

When I listen to music on Apple TV 2 my pictures from iPhoto come in, but always the same album (which I nevr asked for), always in random order and always in a different format. How can I control what is going on and choose the album myself.

When I listen to music on Apple TV 2 my pictures from iPhoto come in aafter about ten minutes, but always the same album (which I never asked for), always in random order and always in a different format. How can I choose a different album myself and control the order and format?

Thank you Winston for a helpful response and for reminding me of something which I found nearly a year ago and then lost (in my mind) because I did not use it. I am grateful for a correct answer but it still only achieves part of what I wanted.
I can now choose my photos, decide how long they stay on screen and choose one of a variety of presentations. Two things I still can't do.
One is to get it to play the photos in the chronological order in which I have carefully set them in an album; it still tends to be random and repetitive. The other is that I cannot get any of them them to saty on screen for more than about 20 seconds. I guess this is all due to the way Apple TV is constructed.
But still thanks, nevertheless.
Alec

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How to Unload and Reload a Composition into the same HTML page?

TLDR:
When loading multiple Compositions into a html page via AdobeEdge JavaScript, how do I remove/delete/unload a loaded composition so that it can be added/loaded to the same page again later? I am open to options not mentioned here, but this is done externally, not within Edge's limited code abilities (working with multiple comps on one page).
*Note: I am making comps in Edge then loading multiple within my own JavaScript/HTML external pages. This programming is NOT done within Edge's code.
Overview:
I could have more than 50 compositions to load into my page, but only one is displayed at a time. In order to make this easier on the user, I load 5 into the page in divs with display: none. I set the id of the first one to an id that has my css to show the content properly. When clicking next, that div is set back to an ID that has hidden css values. Going forward and back works the same. This functions properly. This puts all the obvious preloading in the beginning so the user doesn't have to wait again, as comps are preloaded in the background while they are viewing other comps.
As the user moves farther, I drop the first div and add one on the end with the next comp. This works fine. I can go forward all day, no problem by removing the first div element and adding one to the end. This should make memory not horrible, since theoretically, the comps would be removed as needed...
Problem:
The problem is if the user wants to go back. If I drop the last div and add one to the front, the comp (which was loaded and dismissed earlier) cannot be re-loaded. It also cannot be re-added, even if the div is cloned and re-added later.
This is the code I am using to load the comps:
$.getScript('comp_' + i + '_edgePreload.js', function() {});
Options:
The options I have thought of (and not found a way to make them work) in order of preference:
Fully unload the comp from memory, that way when I make the call to load the comp, it will act as if it has never been loaded before. (Is there a way to unload a comp completely? I haven't found one, but the API is sorely incomplete) **I want this one to work very much.
Ok, maybe you can't actually unload a loaded comp. Can you re-add it to a new div? I have printed out every option I could thru AdobeEdge's interface, and cannot find a way to re-make a div the way it was. Heck, I'd be happy to load the content into a non-child element in JS, then append to html when I actually want to display it. I can't find how to re-setup the div, which has the correct Class and is set up the way it was when the comp was loaded the first time. (this option is bad because it seems all of the comps are still in memory, but at least it would work)
Worst case, I have tried this and ALMOST got it to work. When I removed the old divs from the page, I cloned them and added them to an array of objects in JS. Then, when going back, I pushed them back out, so it was an EXACT copy of the original div, all content was the same, all id, class, style, etc was the same. Unfortunately, AdobeEdge seemed to lose the ability to talk to it. (AdobeEdge.getComposition('EDGE-MyUniqueIdentifier').getStage(); // returns undefined). How do I tell it to re-associate the div with the object that still exists here? And obviously, this is an awful solution, since it appears that all of the comps stay in memory, but I was desperate to simply make it work somehow.
If you need code examples of any of my attempts at the previous options (I have tried them all extensively, and unsuccessfully), I can provide it. I hope someone has found a way to deal with this or has links to actually useful information. Most posts I have found simply tell you to load all your comps and hide/unhide them as needed. This works for small-scale, but when you have a lot of comps to move between, it becomes less of a viable solution.

Exactly the same problem here. Could anyone from EDGE TEAM answer to this question?
How we can UNLOAD and LOAD same or another animation using SAME or DIFFERENT dinamically created DIVS?
Affter loading the second animation AdobeEdge.getComposition('EDGE-MyUniqueIdentifier').getStage() returns undefined.
Thanks for ther support.

Hi, dears i have a problem in itunes is not opening while i am trying to open it nothing happens i also tried to remove the sc info file but still i have the same problem

hi dera i have a problem whit itunes is not opening.
whil i am trying to open it nothing happens.
i also removed sc info files still i have the same problem
i any one know to how plz..........

You can try mp3val, that might fix them up.
Alternatively, if the files are in a standard <Artist>\<Album>\## <Name> layout then turn off Copy to iTunes Media folder when adding to library and use my script TagFromFilename to fill in the missing information.
iTunes often has an issue handling files with multiple tags. These may be introduced by other software such as Windows Media Player, Winamp, or MediaMonkey. Files may have both ID3v1 and ID3v2.x tags, and if I read the ID3 specification correctly, there is also support for multiple ID3v2.x tags each coded for a different language. When there are multiple tags iTunes behaviour can sometimes be unpredictable. In some cases edits to the metadata can be written to one tag, and visible in Windows Explorer, but iTunes insists on reading back unchanged values from the other. In such cases you can use Convert ID3 Tag > None several times followed by Convert ID3 Tag > v2.3 and whatever iTunes knows about the file will be written back to a clean tag. Embedded artwork is erased so needs to be reattached. Using my script CreateFolderArt before and then after the tag conversions is one way to workaround that part of the problem.
Also of note is that certain pre-defined genres are represented by a code number rather than text so that they can be presented in the local system language. There is always a possibility that Windows and iTunes have slightly different values in the look-up tables for some of these.
tt2

Myipad show that there is no SIM card althoght there is sim and I try to take it out and but it back but it still give me the same massage no SIM card

Myipad show that there is no SIM card althoght there is sim and I try to take it out and but it back but it still give me the same massage no SIM card, how I can fix that ?

Kind of what I figured.....will I be able to sync to iTunes in future as many times as I want without the SIM card (once it's activated again)?

How do I place a still graphic in the same place as a flaash animation for devices that do not suppo

Similar Messages

Maybe you are looking for