How do i place box in smart form

hi all,
how do i place box in smart form?please help.

write the following commands in ur text editor of the window for which u want to display the box...
POSITION WINDOW
SIZE WINDOW
BOX FRAME 10 TW
the code will automatically position and size the box according to the window size and position as placed in the screen painter...
reward if helpful
regards
niharika

Similar Messages

How to Keep Boxes in Smart forms

Hi All,
Can anybody help me in keeping the Boxes in Smart forms.
Thanks in Advance
Arun Kumar

Hi Arun,
Plz be more clear. If you are referring to the frames for the windows, then you need to check the checkbox marked 'Lines With' in <b>Box and Shading</b> under <b>Output Options</b> tab of the window.
Also, this will be visible only if any text is written inside the window.
Regards,
Raj

Want Print Priview of check box on smart forms

Hi Expert,
I want Print Priview of check box on smart forms.
I get the checkbox symbol when i give the print out but it not show in priview.
So pls suggest how it show in print priview.
Thanks & Regards
SwatantraPathak

Hi,
If you used the symbols then you cannot see the print preview of the checkboxes. This can seen in the print. If you want to have the print preview of checkbiex you have to create the Window of same size as check size and place it where you required. This cannot be possible with symbols

How to write source code in smart forms?

hi friends,
can anyone can help me in writing sorcecode in smartforms r
any materail link.
if it is helpful points can b rewarded.Thanks in advance.

Hi,
Check this link for
how to write source code in smart forms?
http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
You can write Source Code in smartforms By Choosing Program Lines.
Check this link with Screen Shots
http://****************/Tutorials/Smartforms/PO/page1.htm
Reward All Helpfull Answers
Regards
Fareedas
Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

How to use a check box in smart forms????

Hi All,
Pls let me know how to use check boxes in smartforms.....??
there are check boxe available which are crossed (i.e,, selected checkboxes) in the smartforms..
But i need a checkbox which are not selected.( i.e.., which are not crossed).
Its really urgent...
Quick responses are highly appreciable..
Bye

Refer this thread
Re: how to display symbols in smartforms
We can create symbols in smartforms. For this, change the editor to text editor and then goto insert->characters->SAP Symbols and select the symbol you want.
You cannot see the symbols in print preview, it'll appear only on a hard copy.
You can also create as Text Element. In the left side of the right window,you can see a icon called Editor.Click it.
Then in the Menu,
go to->Change Editor
Then in the menu,
Insert->Characters->Displayable characters,select the character you want.Otherwise,if you want to insert SAP Icon,select that option instead of Displayable Character.

How to print BAR code in SMART Form

Hi All,
I have the requirement to print BAR CODE in Smartforms.
For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
Thanks
Piyush Mathur

Hi,
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
reward if useful
regards,
ANJI

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

How to create check box in tabular form

Dear Friends
i have craeaed tabular form .Recently all column are default text field but i want to change some column from text field to check box .
i have try it with simple check box but there is no option to pass return value in to table.
How to create check box in tabular from.
select
"CLAIM_ID",
"CLAIM_ID" CLAIM_ID_DISPLAY,
"EMPLOYEE_ID",
"CLAIM_DATE",
"START_FROM",
"END_TO",
"REIMB_NAME",
"REIMB_AMOUNT",
"REMARK",
"ACTIVE_FLAG",
"STATUS",
"APPROVE_NO",
"APPROVE_FLAG"
from "EMP_REIMBURSEMENT_DTL
{code}
i want to change column from text field to Check box
Cplumn Name :
1.ACTIVE_FLAG Return value 'Y'
2.STATUS Return Value "APPROVE"
How to pass it with check box in tabular form.
Thanks

Visit this demo app:
http://apex.oracle.com/pls/otn/f?p=31517:1
Section VI has a lot of tabular form stuff with checkbox handling.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to display multiple records in smart forms in new page for each record

Hi,
How to display the data from a internal table in a smart form.
I want each record to be displayed in seperate page.
please tell me with example.
thank u,
Sarath

Do this ,
in the main window - open a loop on your internal table ,
within the loop open the text and give the output fields,
after this text use the Command node and in this set the next page as page1,
so when the loop gets executed its first record will be on the first page and the second record will be on the next page and so on ..
Reward to usefull answers.

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to display pie chart in smart forms

hii experts,
my requirement is to display pi chart in smart forms . i have googled but could not get any meaning full results. If any one knows this pls share ..
Thanks and Regards
Aditya Shrivastava

Hi
I really doubt If you did search at all in the first place. Anyhow, check this:
https://www.sdn.sap.com/irj/scn/advancedsearch?query=piechartin+smartforms&cat=sdn_all
Vishwa.

How to Print Digital Signature in Smart forms.

Hi Experts,
Any one please help me how to use digital signatures in SMARTFORMS.?
Which are the tables used to store digital signatures and please any one have any demo program which prints the the digital signature using smartforms kindly let me know.
Thanks,
Sunil kairam.

Hi Sunil,
After doing some research in sdn and other sources i found the following result...
Digital Signatures are nothing but graphics that we can store in SAP and use in our Smart Forms.
For Example you can create a .bmp file of your signatures, upload it via SE78, and then use it in your Smart Forms in your Footer Area as "Authorized Signatory".
The Logic in the Print Program can be something as follows -
1. Maintain a Z Table having fields like PLANT, FORMID (Name of the SmartForm), USERID.
2. Before calling the Form, the validation is made for the Logged in User with the Z Table created.
3. If the User Entry exists in the Z-Table, the Form is called and the Signature Image is displayed in the Footer Block i.e. the Authorized Signature.
4. If user entry does not exist in the Z-Table then the message is displayed "You are not the Authorized for Printing the Form" and exits the Transaction.
refer to these links:
[http://help.sap.com/saphelp_nw04s/helpdata/en/23/c8b4cb4b3847a9bc32fe100f368411/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/21/530b37cb3ed605e10000009b38f936/frameset.htm]
if u find some info on the topic pls let me know..
best of luck!!!
thanks
ravi

How to call text editors in smart forms?

In my module pool program,I included text editors for three fields.I want that fields in smart forms too.I need to know how these text editors are called in smart forms?

Hi achu,
Any text that gets saved has a corresponding entry in table STXH table. It usually has the following parameters : TDOBJECT,TDNAME,TDID and TDSPRAS.
What you have to do is create a new text element and under general attributes ---> Type - give Include Text.
And in the include text you give the above four parameters which correspond to the text you want to display.
P.S. Do not forget to check the 'No error if no text exists' checkbox.
Hope this helps.
Regards,
Arun

How to create a table in smart form.

Hi Folks,
I need to create a table in smart form with the following fields:-
vbrp-arktx,vbrp-fkimg,komv-kbetr,komv-kwert.
Please let me know how to create a table and how to name the columns,size,and the select query for the same.
All answers will be duly rewarded.
K.Kiran.

Hi,
Following Links gives Details of Smartforms and how to create tables -
smartforms - very useful link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
FAQ
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Siddhi

How do i place box in smart form

Similar Messages

Maybe you are looking for