How do i place multiple items at once in my order?

i've created several cards and a book, but the option to buy is only 1 item at a time

no
again
except for photos every different item is a different order
Only orders for multiple copies of identical items can be shipped for one fee
LN

Similar Messages

How do I delete multiple items at once instead of one at a time?

How do I delete multiple items at once instead of one at a time? I have several duplicate items in my library and would like to delete the duplicates. Thanks!

You can select multiple items using shift to select a range and control to add or remove items from it.
Regarding duplciates, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

HT1451 when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

Same way you select multipl items anywhere else.
Hold ctrl and click the items you want.
If they are in consecutive order, click the 1st then Shift click the last.

How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment?

I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

Hi @needyrhelp,
Welcome to the HP Forums!
I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

From my music how do i move multiple songs at once to a playlist

From( My Music) how do I move multiple songs at once to a playlist.
Thanks

Your issue has nothing to do with Apple networking. You may get better results in getting a solution if your post your issue to the iTunes area of the Apple Support Communities.

How do I select multiple items on blackberry phone?

How do I select multiple items on blackberry phone?

Multiple items of what?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I place an item on Desktop?

How do I place an item on my desktop. All i seem to beable to do is bookmark everything?

Other things that need attention.<br>
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r85
# Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

In Firefox Add-ons Themes, how do I place the items in My Collections in the order of my choice?

In Firefox > Add-ons > Themes, how do I place the items in My Collections in the order of my choice, rather than the default?

Hi Yanele, I think they display in the order that you installed them. However I have never tried to move the folders of each add on in the profile folder. I do know that in the Profile Folder there is an addon.json folder. This is where the list of add ons populate. However there is also other information that has the file path information to make the add ons function. (manifest file)
It is possible to manually edit the order in that file, however it is not recommended because it could break. I would recommend giving feedback and suggesting the order customization if you would like. If you have any questions about this we are happy to help.

HT201364 You need 4.93 GB of available space. I cannot download OS X Mavericks. I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available?

You need 4.93 GB of available space. I cannot download OS X Mavericks for I obtain the following answer: Remove items from your startup disk to increase available space. How do I know what items I should remove in order to make more space available? Thanks.

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

How do I move multiple clips at once in the project rather than one a time?

I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

This did not help and that did not work. I had already tried that Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

How do I import multiple playlists at once?

I know this issue has been discused before, but without a solution tailored to what i require, so I will reistate the problem from my point of view:
Background: Had a Windows I-Tunes library, supremely organized. The mother of an Electric surge broke through my anti-surge defenses and fried the motherboard, the hard disk, the Power supply, or so the CompUSA techs tell me. A total loss. My wife has a Mac, I wanted to move my music and playlists to an I-Tunes account stationed on her mac, and reorganize the library just as it was before synching my I-pod and keep walking my life.
Process:
With some third party programs I managed to transfer my music into ITunes and now I have it back. But now I want to recover the playlists that I had organized into folders and have my music organized as before. Some might say I-tunes is already organized, there no need for so many playlists...but to find My Chemical Romance under the Holiday music genre isn't where I though I would find it or where I want it. And there are thousands labeled in "genres" that I have never heard about...just because the CD had scripted the music on it was of that genre.I Use playlists to organize the music I use frequently, be it from a single group (best of) or a multi-group compilation, hear it the way I want it and have reasonable quick access to it. I don't like looking around for a song as I do other tasks.The I-Pod control wheel is not my hamster wheel.
In any case, I need to import the playlists en masse. There are many of them. I already have the playlist text files pre-separated, so I can import them in groups and place them in the folders they belong to. No overwhelming the system. I-Tunes is a heavy program in itself and any stated "slowing up" is imperceptible to I-Tunes regular speed. The benefits of my structure are primarily enjoyed in the I-POD. I hardly hear music directly from I-Tunes, it puts too much of a burden in a system I use for other heavies like photoshop etc.
I tried to do this with the automator...but it can import anything but playlists. I lacks a step to know what to do with the playlists once it has acquired them...don't know why it has the step to get them but no apparent action for what to do with them. This is what the workflow looked like. I thought it would work:
The problem was the last step: I was designed to import ONLY MUSIC. And there is no step that applies for the previous get playlists one that I see. Is there a custom workflow or suggestions on how to make this happen? this would both help me learn more about the tools available AND save me weeks of item by item Importing.
Att. Bayul

Hi Ken,
but that doesn't work.And, by the way, Drop does not exist as an option in that context menu, at least in the versions I checked: 3.0, 3.1.
Here are a couple of other posts on this issue:
Re: Deleting multiple items
Multiple Objects Deletion
On the SQL Developer Exchange Feature Requests page there are actually several instances of this. Multiple Drop Objects has the most votes and has been ACCEPTED:
https://apex.oracle.com/pls/apex/f?p=43135:7:1551303100110801::NO:RP,7:P7_ID:721
Mentioned in one of the posts above is bug 5855085, actually an enhancement request, whose scheduled release keeps slipping.
If you highlight multiple objects (I tested with all objects of the same type) in 3.1, then select Edit -> Delete from the menu toolbar, a confirmation dialog titled "Erase from Disk" pops up, but an affirmative confirmation does nothing. In 3.0, the Edit -> Delete choice is not even enabled.
Regards,
Gary
SQL Developer Team

How can I place multiple choice boxes on the same line instead of in a column?

I know it is possible to place multiple fields on the same line, using drag and drop.
But to save space, I would like to have 3 or 4 multiple choice boxes next to each other on one line.
Is this possible, and if so, how?
Thanks
Peter

You may click on the "+" button to the right of the first multiple choice box to add more in the same line. When you hover over the button, the tooltip says "insert item beside".

How can I transfer multiple songs at once from itunes to device

I was wondering how you can transfer multiple songs or files from itunes to a device, such as an ipod, at once. The past itunes let you do it and I've been trying the same methds that you use on the older versions but nothing is working. Anyone know how to do it?

If syncing, select the content desired to be synced and then sync.
If manually managing content select the content then drag and drop it. Multiple items can be selected by holding the Cntro key and clicking on multiple items.

Adding multiple items at once to a SharedCollection

I'm playing around with Cocomo for the first time. I like it
a lot, but haven't yet got enough understanding of the API. So I'm
sure I'm missing something obvious.
Anyway. I want to build an application that share an array of
items between clients. The array should be persistent and when a
new client connects it will get the latest data. At the startup of
the first client I want to fill the shared array with default data.
I also want to revert to this data from time to time in an
applications lifecycle.
I've been checking out the examples and I think a
SharedCollection would be perfect for this scenario (not sure if it
really is?).
The problem I have is when I try to fill the SharedCollection
with data, using the addItem method within a for loop, I only get
an entry with the last item, instead of multiple entries (I'm
checking what data that has been added by using the Dev Console).
I'm doing all this in the SYNCHRONIZATION_CHANGE event (only the
first time it's fired).
I should also note that this happens the first time, when no
CollectionNode already is created. When a CollectionNode already
exist it works.
Is this totally the wrong way to go? Am I missing something
about how CollectionNodes should be created? Any help is highly
appriciated!

Hi ,
I actually modified the SharedCollectionExample locally to
have items added in the beginning in synchrinization change
handler. It works fine for me , here is what I did
In the SharedCollectionExample in the examples folder ,
add this line
_model.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE,onSynchronizationChang e);
in the onCreationComplete() method where you first declare
SharedCollection Class.
And in the
private function
onSynchronizationChange(p_evt:CollectionNodeEvent):void
if ( _model.isSynchronized ) {
_model.addItem({State:"Nevada",Capital:"Carson City"});
_model.addItem({State:"California",Capital:"Sacramento"});
I can get multiple items( i.e. these two items i added) in
the very beginning. If you check that the model ( SharedCollection)
is synchronized and add within it the items it should work fine and
will give you an initial set of items. Also, shared collection has
a property called idField and it will index objects based on this
field value with duplicates being overwritten.
I hope this helps. Otherwise please copy fractions of code
where you are still finding problem.
Thanks
Hironmay Basu

How can I browse multiple things at once in iTunes?

I am trying to browse many different versions of Vivaldi's Four Seasons. Comparing different composers work in the iTunes store (with a view to buying). In a normal web browser I would open multiple tabs. Is this possible in iTunes? I would like to quickly compare side by side different music. But if I need to go back and click and play and go back (to search results) over and over again, it makes this a tedious process.Surely there's another way?
I have since learned that apparently the iTunes app is a web view? This is interesting considering the rules for submitting apps to the app store disallow apps that are merely web views, but that's what iTunes is. Ok, so if that's the case, how can I use iTunes in the manner I've described?
Any ideas how I can achive what I'm after in iTunes for Windows? Thanks for any thoughts.

If syncing, select the content desired to be synced and then sync.
If manually managing content select the content then drag and drop it. Multiple items can be selected by holding the Cntro key and clicking on multiple items.

How do i place multiple items at once in my order?

Similar Messages

Maybe you are looking for