How do I play a blue ray disk on my MacBook Pro?

How can I play a blue ray disk on my macbook pro

You have to buy an external Blue-ray player.
Check this site out. Click on the "CD/DVD/Blue-ray tab.
http://eshop.macsales.com/
Hope this helps.

Similar Messages

  • How do I play a Blu Ray DVD on my MacBook Pro??

    I am trying to play my Twilight (shh, I know, I know, it's a guilty pleasure ) BluRay DVD's on my MacBook Pro - but, it's not playing, nothing is coming up. Anyone know how to play BluRay on a MacBook?? Is it even possible?

    You need an external Blu-ray player (the built-in SuperDrive does not support Blu-ray) and a Blu-ray player (such as http://www.macblurayplayer.com/promotion.htm or http://www.bluray-player-software.com/ or any, really). Then you can play Blu-ray discs on your Mac.
    Clinton

  • Problem playing commercial Blu Ray disks

    We seem to have a problem playing commercial Blu-Ray disks with the SCCM client installed, it seem that the Microsoft mirror driver breaks the Blu-Ray licensing and disk can not be played? any ideas?

    Yes, I know this is an old post, but I’m trying to clean them up.
    This is not something that can be answered here in the forums, you will need to contact CSS directly for support, they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • How can I play a Blu-Ray movie on an iMac?

    What do I need to buy to play Blu-Ray movies on my new iMac?

    It is in the link I posted in my reply.
    A software to play blu ray disk
    You can also try VLC
    The new 2.0 release of VLC Media Player says it can handle Blu-Ray video disks. Being free, there's no risk in trying:
    http://www.videolan.org/vlc/

  • Can we Play the Blu-ray on the latest Macbook Air?

    There is some way available for playing Blu-ray on iMac, what you need is a external BD drive and Mac Blu-ray Player, is the way also apply for the Macbook Air?

    Now Mac still can't support Blu-ray, but the way to do this is almost the same, an external or internal Blu-ray drive plus Blu-ray player software. Both can be found on Amazon
    http://www.amazon.com/Macgo-Mac-Blu-ray-Player-Download/dp/B00UGXH0N6/ref=sr_1_8 ?ie=UTF8&qid=1426147986&sr=8-8&keywords=…

  • Can I watch Blu-ray movies on my MacBook Pro 17-inch?

    If this is possible at all, I think there are two or three issues to be addressed.
    First, I understand that to display Blu-ray movies, the display must be HDCP compliant. All I know is that mine has adequate resolution (1920 x 1200). I called AppleCare and they could not verify HDCP compliance; however, they also did not find any information explicitly stating that it is not. Does anyone know the answer to this, and if it is indeed required?
    Second, I need an external Blu-ray drive that will work on a Mac with OS X 10.6.4. Ideally it would not require an external power supply. I've got a laptop, so the more portable the solution, the better.
    Third, I'm guessing I'll need new software to play the movies on the disc, rather than the pre-installed software that plays regular DVDs. I would prefer a Mac software solution; however, I do have Windows running under Parallels Desktop 5. I am concerned that if I go with a Windows solution (such as PowerDVD 10 Deluxe) playback could be choppy given the dual demands of Blu-Ray HD and the Windows virtual machine it's running on.
    Any advice? Thanks.

    Find an external blu-ray player for OS X. Apple has yet to support Blu-Ray in any way, shape, or form
    Send complaints to [email protected]

  • HT1428 Log into FileVault gives error on disk try again later. This is only account on system how do I log in to do disk repair. MacBook Pro running lion

    Only have 1 account on MacBook Pro. Protected by FileVault. Log in  says your home folder didn't open. It needs repaired. We click ok. Unable to login to account at this time.  Account failed because error occurred.   Everything I have read so far has me doing things from the finder but I can't get into the program. This happened after I did an update last night  and it asked to restart system. I have it backed up on external drive through time machine but I can't get in to use it.

    Hey Sky42,
    Thanks for the question. The following resource may help to resolve your issue:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    Thanks,
    Matt M.

  • I want to play PC games on my MacBook Pro but they all support windows. How can a play these kind of games on my MacBook Pro?? Thank you

    What program's or apps do I need to play windows supported PC games?

    There are some applications that allow you to install Windows applications in OS X, like CrossOver. However, these apps often fail and they don't work with all the applications, so that's not a valid solution.
    As LowLuster said, the best option is to use Boot Camp to install Windows there. First of all, check what Windows editions you can run in your MacBook > http://support.apple.com/kb/HT5634
    After choosing the edition you want to buy (I recommend you to use Windows 7 or 8 if possible), buy a full version or System Builder of that Windows version. Then, follow these steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf It's important to download the Windows support software

  • Blu-ray disk plays with snowy pictures at the beginning

    I need help with a new issue with my burning (Win 7 Pro, CS5.0 from Adobe's original installation disks, LG BD-rewriter; different BD-R, BD-RE blank disks: Sony, Philips, Kodak).
    While playing within Encore with the "Preview From Here" feature doesn't show any problem, burning (either directly from Encore, or from file with ImgBurn) and playing for the TV on the Blu-ray player (Panasonic DMP BDT330), every once in a while, the beginning of some menu items plays a snowy noise intermittent with some black frames for anywhere between 3 - 6 seconds. Playing back several times, this issue happens at the beginning of different menu items (and mainly when playing a playlist with the same items).
    Playing commercial Blu-ray disks, or my older Blu-ray disks, there is nothing wrong with the playback.
    It seems to me that this is something either that Encore or the LG OD does. Before I start reinstalling the CS5 suite (removing it with Revo first), I would greatly appreciate any idea about the cause of this behavior.
    Also, it would help me to eliminate some of the possible culprits if I could play back the Blu-ray disk directly from my BD drive. I would appreciate any suggestion for a good and tested software (free, or paid for) that would not interfere with Adobe (or mess up my "pristine" OS ).
    Thank you very much,
    Laci.
    P.S. My guess at this point is that the culprit is the BD burner. While commercial DVD/BDs are "pressed", home burners use PCM (phase change memory - and also memories from my Intel years working on their reliability). If the burner laser gets older/defective, then the melting/recristallisation of the PCM lmemory element might not be "perfect", and when it is read, it sometimes gives the wrong response (even with ECC which I am not sure they employ in DVDs).
    I am still waiting for, and greatly appreciate, some advice before I rush to buy a new burner or reinstall the whole CS5.
    Thanks,
    Laci.
    P.P.S. Sorry for all these information most of which is probably irrelevant (especially the PCM memory part ). I opened (should have done first) the BD disk on my computer and checked the m2ts files in BDMV > STREAM > *.m2ts. They all (including the motion menus) play flawlessly on the computer with WMP. So, the burning and playback of these files causes no problem. The problem most probably comes when Encore builds the navigation. Since the motion menus on the disk also play without any hickups, I assume that it is the Encore itself that causes these problems. I am going to reinstall CS5. (The still open question at this point is, how it is possible that this snowy few seconds before some of these m2ts files does not always happen at the same m2ts file playing back the same BD disk on the TV.)
    I would still appreciate some input from the expert users.
    BTW, is there any program out there whith what I could substitute Adobe Encore? (This is the only weak spot of the entire suite ).
    - Laci.

    the beginning of some menu items plays a snowy noise intermittent with some black frames for anywhere between 3 - 6 seconds. Playing back several times, this issue happens at the beginning of different menu items (and mainly when playing a playlist with the same items).
    What does menu items mean? I assume that it is menus themselves, not timeline movies?
    What could Encore do that would create this? I don't know, but assume that it is more likely to do with disk seek problems and the like. And yes, where things are put physically on the disk can be an issue. But burn/disk issues are more likely.
    Have you tried this on a different player?

  • How do I change file format so I keep HD and can play on blu ray player?

    how do I change file format so I keep HD and can play on blu ray player?

    Hi
    Part of it - in my way of doing is
    Roxio Toast™ Pro incl BD-component.
    • Burn short AVCHD - on standard DVDs (20-30 minutes at HD quality) - NEED Blu-Ray player to be viewed
    or BD-burner and disks - for full Blu-Ray Disks (not got to this yet)
    I think that saving as .mpeg4 H.264 and save on USB-memory to be put into PlayStation3 also keep high quality playback.
    Yours Bengt W

  • How to read Blu-Ray disk from Encore

    I shot footage in 1080i on a Sony HDR-HC7 camcorder. I edited it in Adobe Premiere Pro CS3 V3.2.0 (374) running on XP home edition. I then created an Adobe Encore project (Encore CS3 V3.0.1.008). From Encore I burned 2 standard DVD's, one on the DVD burner & the other on my Blu-Ray burner (LG GGW-H20L, firmware YL05)). Both disks played perfectly on my Sony Blu-Ray player ( Sony BDP-S300).
    From the same project I then burned a Blu-Ray disk using Verbatim BD-RE (2X) on the same LG drive. When I attempted to play this disk on the same Sony player I got the message 'Can't play'. I repeated the above process several times & each time I produced a Blu-Ray disk that can't be read.
    Can anybody tell me how I can resolve this problem?

    Many thanks! Updating the firmware on the Sony player did the trick (V2.1 to
    V4.5). The earlier version could not read BD-R(E).
    Regards,
    redmondo

  • How to connect my sony blue ray play to wifi via my airport utility?

    how to connect my sony blue ray play to wifi via my airport utility?

    The airport utility has nothing whatever to do with the sony bluray player.
    The airport utility is to setup wireless in the airport.. once you setup wireless then you use the sony setup for wireless in the player as per its manual.
    Please do keep the wireless names short, no spaces and pure alphanumeric.
    As well as pure alphanumeric passwords if you want to do this successfully.

  • I have used my older Mac Pro and now my new 2011 imac fo play the many movies and TV shows I have dowloaded. Great results. But I also have a lot of Blu Ray disks.

    I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
    But I also have a lot of Blu Ray disks.
    I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
    Thanks for your consideration.....

    I have used my older Mac Pro and now my new 2011 iMac fo play the many movies and TV shows I have dowloaded. Great results.
    But I also have a lot of Blu Ray disks.
    I am going to load windows 7 via Boot Camp for other reasns. After that is done, and even with an external Blu Ray player, is it still not possible to play Blu ray movies?
    Thanks for your consideration.....

  • I have buy a new HP 8560W notesbook, but I can not play Blu-ray disk?

    I have buy a new HP 8560W notesbook, but I can not play Blu-ray disk?
    I can not see on HP homepages there is some other disk to buy?
    Shall I do anything speciel for play Blu-ray?

    Yeah if you do not have a Blu-Ray drive....no Blu-Ray but the spec page for your model says they all have at least a Blu-Ray reader.

  • Am I able to play blu-ray disks on this Satellite L755?

    I have received a driver Alert which should enable me to play Blu Ray disks.
    Downloading does not work on my L755.
    Am I able to play blu ray on this machine?

    Thanks. I have Satellite L755 Model TAIS Model Number PSK2YE-0MX014EN.
    I understood when I bought the laptop that I could not play Blu-ray, but the repeated "Alert" seems to promise otherwise:
    "This software provides you the capability to play back Blu-ray discs"
    Shame....

Maybe you are looking for

  • When i install a 2nd 1gb stick of memory in my pavilion dv6000t laptop, the laptop will not boot.

    HP Pavilion dv6000t running Windows Vista Ultimate 32-bit version.  My system currently is running on a single 1GB stick of memory.  I have a 2nd matching 1GB stick of memory.  When I install the 2nd stick of memory the system will not boot.  All the

  • Dv7-4302er add hdd

    Model HP PAVILION dv7-4302er Can I install a second hard drive to the model, if so, how?

  • Photoshop CS4 Redraw Problem

    I have a strange problem that just arose yesterday, running 11.0.1, up to date Bridge and Photoshop. What happens is, when I have an image open, and do any adjustments (curves, actions), the action will complete, but the image will not redraw until I

  • What's the latest os for macbook pro 2.1

    I have a MacBook Pro 2.1 which I believe is the first 17" aluminum model from 2006. I need to know if it would run on Mountain Lion. Apple system requirements state that the earliest MBP to qualify is from mid to late 2007. It currently has OS10.6.8

  • Tracking a received message

    My question is how to track a received message. That is, although I can verify that a message has been received (the D record in mail-log), and put into related account (the E record in mail-log), the user complains that he never got the message (Out