How do I play just one song?

I have a lot of Classical music. I imported whole pieces and joined them so they appear as one song.
If I chose any song in a playlist it will play that one and when it is finished it will go to the next.
I would like to play one song and then have iTunes stop. Is this possible, or do I have to create a playlist with just the one song?
iTunes 8.1

Unchecking songs can create other issues down the road. Easier method is this: select the song and use Command + Shift + N. This create a new playlist with the single song. (The playlist will also appear in your Source list...so if you don't want to keep it, make sure to delete it later.)
You could also control-click the song and choose Show in Finder, then play from there. There may be other methods which are easier, these are just ones that I know of.

Similar Messages

  • How can I get my iPad to play just one song from my playlist and then stop automatically?

    I am a music teacher and I use the iPod on my iPad to play songs in class.  I have a long playlist of songs to choose from in each class, and I want to play just one song at a time.  I want to be able to start one song from my playlist and then walk away from my iPad and have it stop automatically when that song is over.  (I know how to make it repeat the same song over and over, but tha'ts not what I need.  I also know how to push "pause," but I don't want to have to walk away from the children to do it.) How can I make it play one song from a playlist at a time?

    I don't believe that there is a way to do that except, perhaps, creating a separate Playlist for each song.
    Suggestions for features to Apple at: http://www.apple.com/feedback/ipad.html

  • How to play just one song?

    How can I get my iPod to play just one musical piece--to not automatically go on and play every song after it continuously? I listen to classical and symphonies can be 40-60 minutes long. I would like it to stop after one so I can then choose another. Can I set it to stop after each selection?

    What happens if you go into the artist or album lis and juts pick the one album it is on? I am fairly sure that when you play an album, it plays everything in the album and then stops.
    So if your symphony is a single album, you should be able to pick the album and play it that way (vs. going in and searching for the song in the big song list).
    Patrick

  • How to play just one song at a time

    I have been looking around in iTunes to see how in the heck I can tell it to only play one song at a time when I double click a song in my library (and not the next song). Anybody have any idea if this is even possible? Am I overlooking something?

    If you don't use the checkboxes for any other purpose then ctrl+click any checkbox to check/uncheck all visible items. If all items are unchecked iTunes will play any track you double-click on and then stop. As and when you want to listen to an album or a playlist straight through you can make use of the Up Next feature which plays all tracks added to it regardless of checked status.
    tt2

  • How do I play just 1 song on the iPhone / Making Playlists on iPhone?

    Is it possible to just pick 1 song and play that and nothing after it? It always wants to play another song after the one I choose.
    Also - What is the 'On the go' playlist for and does it sync to iTunes?
    Lastly - Is it possible to make playlists on the iPhone or do these need to be made in iTunes and then synced?
    -Frankie

    Like Glor says is how to set it to play one song and then end playback. Add that one song to the on the go playlist, and then play the playlist.
    This is because it appears that the phone refers to each song as part of a larger group. It's not <songname>, it is <playlist>-<songname>. Even the master list groups songs under a group heading, kind of like a First Name Last Name setup. I figure it's to keep a song named Blue easily separate from a phone contact named Blue, and both of those separate from an application also named Blue. They would be called App Blue, Song Blue and Contact Blue. Just my offhand supposition.
    As for making playlists on the phone... You can only add songs to the On The Go list, all of the others are unable to be edited. However, if you add songs to On The Go, the next time you sync that playlist is copied to iTunes and renamed "On The Go 1". And then the original On The Go is reset to empty - ready for you to monkey around with it at will.
    So, I add "Blue" to On The Go on the phone.
    Then I sync.
    "On The Go 1" appears in iTunes and on the phone. It only contains the song "Blue"
    The phone's On The Go is reset to empty.
    So now I have a playlist "On The Go" that I can add songs to with the phone, and another playlist called "On The Go 1" that I can only edit on iTunes.

  • Who wants to play just one song?

    Does anyone know why I can only play one song in iTunes now? It doesn't matter which playlist, or in the main library, it plays one song and then stops!!!
    Shuffle doesn't matter, repeat doesn't work, just when I needed iTunes the most it acts like its windows software!

    Do you have check marks in the box to the left of your songs' name? If not, itunes will ignore each song unless you select it by clicking on it.
    To check all songs in your music library or a playlist, hold down the "command" key while clicking the check box..

  • Playing just one song

    New to this so please excude me! iTunes was behaving very well until earlier today when it started playing just the highlighted track and not continuing through the rest of my library as before. Any ideas on how I can get back to the 'runthrough' mode?
    Cheers, rachiet.

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - control-click on any checkbox on a Windows system will select or unselect them all - and you should then have continuous playback.

  • How can I copy just one song from my iPhone to my iTunes library?

    I have purchased songs through the iTunes app on my iPhone 4S.  I want to get these songs on to my iPod.  I figure I need to first transfer the songs from my iPhone to my iTunes library on my PC.  Problem is it always seems to want to sync my library with my iPhone and I have way too many songs in my library to fit on my iPhone.  I just want to transfer a couple of songs from the iPhone to my library. Is there anyway to do this?

    Hi, first, you should prevent the iTunes library auto sync with iPhone: Launch iTunes > click Preferences... > click Devices. In the window, check the option 'Prevent iPods, iPhones, and iPads from syncing automatically'. Next, connect your iPhone with your computer via the USB cable. Click the mini menu for iTunes on the very top left and click the option 'Show menu bar'. After then you can see iTunes File, Edit, View, Control, Store and Help menus on the ribbon. Click File > Devices > Transfer purchases from (your iPhone name). You can also access to the File menu by holding down Alt (Option on Mac), Shift and F keys. This is how to get your iPhone purcahsed song transferred to iTunes Library.

  • Playing Only One Song

    How do I play only one song on my iPod, then stop without automatically going to the next song? I can't find a setting and not sure how to do it.
    I play in a small band and have loaded recorded audio backing tracks into the iPod. I want to be able to play the song (i.e., backing track), then stop when it is finished without automatically going to the next song.

    Thanks. I knew I could create a playlist with one song in it. However, when on stage that will take too much time between playing individual songs. Unless, I set up a single song playlist for each song, of which there are hundreds that we do.
    I was hoping I could find a setting that would allow me to play a single song directly from the Library.

  • How do I change the start/stop time for multiple songs not just one song at a time?

    How do I chnage the start/stop time for multiple songs not just one song at a time?

    I don't think you can in iTunes.
    Multiple editing in Get Info does not offer an option to change start/stop times.

  • When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

    When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

    for purchases from the iTunes store do this:
    connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    for everything else check out this post by Zevoneer.

  • IPod 2G playing music with shuffle will only repeat just one song

    When I start playing music on my iPod it will repeat just one song.

    Do you have the repeat feature turned on?  It is the racetrack-like icon on the left side of the screen below the scrubber bar.  Tap the icon to cycle through the variuos modes (off, repeat play list, repeat one song). Thus is covered in chapter 4 (Music) of the Users Guide.
    Apple - Support - Manuals

  • IPhone plays only one song at a time

    After 2 weeks of the iPod feature of my iPhone working just perfectly, last night I discovered it will no longer go through a play list. No matter what I do, it plays only one song, repeatedly - either a song I choose or a song selected randomly by hitting Shuffle. Shuffle only chooses the first song randomly, after which that song plays over and over unless I manually choose another. I deleted my playlists this morning, rebooted iTunes, re-synced my playlists to the iPhone, same problem. Other than having to go through an entire Restore, are there any other options? This actually occurred out of the blue, NOT after a re-sync with the computer, therefore NOT caused by the iTunes update to 7.3.1.
    iMac G5   Mac OS X (10.4.10)  

    THANK YOU!!! I never would have found that myself because I don't even look at albums let alone play whole albums. My playlists are favorite songs from here and there and rarely more than one or two from any particular album. I don't know how that got changed since I have never looked at an album before, didn't know there were time and shuffle markers. I must have gone bump in the dark... so thank you again!

  • HT3819 How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

    How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

    many thanks.
    That should be possible.
    From his library connect to your library via Home Sharing.
    Select the name of the shared library in the source pane of your itunes, and click on the wee disclosure triangle to the left of the name of the library. Does "Films" appear beneath the name of the library?
    Here's a screenshot of what I mean.
    Select "Films". In the right-hand pane you should see the item you want to transfer. Just select that item, and click "Import".
    Use the same basic technique to get one or a few songs from your library transferred to his library. (The only difference is that you would have "Music" selected instead of "Films".
    If you don't want him to have access to other items in your library, you could just switch Home Sharing off on his library after you've done the transfers.

  • My new I5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?

    Hi there everybody,
    My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
    Some help will be greatly appreciate.
    Thanks much!

    When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer?  Your iTunes library does not have an email address.  An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases.  Changing your Apple ID will not make songs disappear from your computer's iTunes library.
    If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID.  In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password).  That may not be your current email address, but Apple uses it as your user name, so it does not matter.
    On the iTunes Store Home screen, click on Purchased under QUICK LINKS.  This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost. 
    NOTE:  If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID. 
    For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
    If that's not what you mean by "changed the email address on my account," please post back with more details.

Maybe you are looking for

  • Creating CSR with multiple common names in a single CSR

    Hello Gurus, We are configuring SSL for which we were in the process of generating CSR from Oracle HTTP server. But we want to use multiple URL's for a server. For example domain.example.com will be our primary URL and domain2.example.com would be ou

  • External Disc Drive disappeared from Mac Mini Devices

    Hi Forum, my External USB2 Drive has disappeared from the devices list on my Mac Mini. When i was with the Mini i turned it off and on, Mini and CD Drive, unplugged and replugged the Drive, but i didnt appear. Ive had to come away for a few days and

  • Download weblogic server 6.1 upgrade from sp1 to sp2

    can u give me link to download the weblogic server 6.1 sp1 upgarde to sp2

  • Project sharing in Premiere Pro

    Here is how project sharing should work now that the creative cloud is there.. A user should be able to sync their project to the cloud (much like they sync their keyboard settings) and invite another editor with the same set of media files to share

  • Cisco 871 Guest Login Screen

    Does this unit come with a default website that allows a username/password to access the WiFi? Example, a user comes in and sees the SSID and connects. When he gets on the web, he's presented with a screen for a username and password. Once he gets pa