How do I play my completed 3D movies created with CS5.5 and Cineform Neo3D?

I know how to display a video being edited with CS/Neo3D but how do I play it after the completed movie is rendered in its final form.
I have not been able to verify that I can use Quicktime 7 and the FBX QuickTime Viewer Plug-in from Autodesk? I think you could output to a 3D TV connecting it to the Mac graphics card DVI output (with a HDMI 1.3 converter) using the 2nd Display option of Quicktime. Will this accept a full 1920x1080 to each eye and include audio? Can I put the 3D movie on a DVD to play directly on a 3D TV? Thanks.

Following is the thing i found after many searched for you..
Anything goes awry in this unholy menage-a-trois that causes a hard shutdown, harms the OS and it is being a great reason subsequent failure to boot up due to a lockup at the "Welcome" splash screen, You will have to press the "enter" key with machine gun rapidity when the "Welcome" first starts moving and keep it up despite the little tone telling you to desist. It seems to work. I have run out of more logical solutions....
This is the only thing i can suggest for animated techniques whether in form of animated movies or anything else.

Similar Messages

How do i save a calender i have created with the photo and the dates saved on separate pages?

how do i save a calender i have created in photoshop with the photo and the dates saved as two separate pages? when i save as pdf or jpeg they are authomatically saving 1 pg with the photo and dates on one page. This is causing problems when i print.

Hi there, in case your printer cannot print very large, you can also crop down two versions and print them as separate documents.
1) Create a guide where you would like to split the pages by clicking on the ruler (hit command R if they are not showing) and dragging to the desired area.
Creating the guide will make it so you can be precise in the way you split up your page, and so that no part of the image will be repeated or lost.
2) Select the Crop Tool and fit the crop area to the top half of your calendar, using the guide you've just made to snap to the right spot. Hit return to finalize the crop.
3) Go to File > Save As. Name the file something like calendar_top and select the desired file format. Hit "Save."
4) Once you get back to your calendar file, Go to the History panel and select "Drag Guide." This will take you back to the step before you cropped the image.
5) Repeat the steps as before for the bottom half of the calendar, once again using the guide to help you make your crop area.
So then you would just print each of the two pages individually. The images will not be contained within one document, but if you have Acrobat you could combine the files.
I hope this helps!

How can I play podcasts so that they begin with oldest first and move up to more recent?

When I dowload podcasts on my ipod classic I can't listen to them right away and they accumulate. When I play them, they always play downwards, from more recent to older.
I want them to play from oldest to most recent in order. How can I make this happen?
Thanks

When I dowload podcasts on my ipod classic I can't listen to them right away and they accumulate. When I play them, they always play downwards, from more recent to older.
I want them to play from oldest to most recent in order. How can I make this happen?
Thanks

How do I play my downloaded rental movie on my ipad2?

How do I play my downloaded rental movie on my ipad2 and where do I find it...help ?

If you've downloaded the film directly on the iPad or synced it to the iPad from your computer's iTune then it should show in the Videos app on the iPad - it's icon looks like a film clapperboard.

HT3775 How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

How can i play my avi formatted movies with the new mac OSX 10.9.2 update?

Try using VLC or installing both QuickTime 7 and Perian. Nothing will work with all AVIs; some of them require codecs not available for Mac OS X.
(105507)

How do you play mine craft on a mac with 2 screens fullscreen

how do you play mine craft on a mac with 2 screens fullscreen i play mine craft and i have a mac pro with 2 screens and i want to know how to play mine craft with both screens

Up until Mavericks, the default setup for multiple displays was "Extended desktop". This picture show how it works far better than any words I could post here:
The blue boxes are Icons for your displays, whose sizes are proportional to the number of pixels. Drag the boxes so that they accurately represent the placement of the displays on your bench (left, right, up, down). Then the mouse moves freely across the boundary between displays, and you can drag a window with it. You can also stretch a window so that it covers most of both screens.
The small white header is an Icon for the MenuBar, which is also moveable.
for Mavericks and later, a different scheme "Displays have separate spaces" becomes the default, but can be annulled by this setting in Mission Control:
"Full Screen" is a concept ported from iOS, the land of tiny screens and one-at-a-time processing for the iPhone. If you have multiple screens, invoking "Full Screen" will make most of the screens stop working entirely, which your main window expands into the MenuBar area. Do not use "Full Screen" on a Mac with multiple screens.

How on can get the plaback of .mov files with Redcode Codecs?

Hi folks,
I am not able to play the .mov files created by Red camera so..
how one can get the playback of .mov files with Redcode Codecs?

Well, one typically doesn't edit with any of the proxy-files the RED camera produces. You need to convert the RED footage to ProRes. Log and Transfer can do this, if you download and install the RED Log and Transfer plugin. Or you might need to use RED software to convert the footage to ProRes. But those Red proxy files won't import via log and transfer, and are NOT editable in FCP. Gotta convert to ProRes.

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

How do I play my iTunes music on my iPad using WiFi and iTunes match (my music is stored in the cloud).

How do i play my iTunes music on my iPad using WiFi and iTunes match? I don't want to download my music to my iPad.

But that's what I don't want to do. I think I must have misunderstood what was possible with iTunes Match and the cloud. I had thought I would be able to play my music directly from the cloud using WiFi. I didn't think I would have to download it from the cloud to play it on my iPad. I store it in the cloud because I don't have enough storage space on my iPad -- I can't download all my music because I run out of storage space. If iTunes Match doesn't allow you to play the music FROM THE CLOUD, but instead only allows you to DOWNLOAD IT FROM THE CLOUD TO YOUR IPAD TO PLAY, then it's not serving the purpose I thought it would. What's the point of storing it in the cloud if you have to download it to play it?
The only way I could imagine it working for me is if it possible to only download particular albums or songs. Or does your whole library have to be downloaded?

How do I move my pc CS5 shortcuts and workspaces to CS6 in Macpro ?

trying to move my PC CS5 photoshop and illustrator shortcuts and workspaces, and photoshop presets, into CS6 on the macpro retina,
can someone give me a rundown how to do this? I don`t want to stuff it up.
PS & AI shortcuts and workspaces,
PS presets (including brushes).

Photoshop. importing from pcCS5 to macCS6
importing workspaces.
I was able to import my workspaces from pcCS5 to macCS6 by pasting them into this path in the finder,
"applications/adobe photoshop cs6/ locales/ en_GB/additional presets/mac/workspaces/2-taskbased workspaces/ .... "
even though the pc file is called unix executable, when I restarted PS on the mac, it showed up in the workspaces drop down in PS and is functional.
importing brushes
regards PS edit/presets/ export.import presets...
I imported my custom brushes via that dialog, but have no idea where they ended up, I dont get the purpose of that dialog then,
so I just used the normal presets manager in macCS6 to load the brushes that I imported from pcCS5 and that worked.
importing keyboard shortcuts
paste the pcCS5 keyboard shortcuts into
"applications/adobe photoshop cs6/ locales/ en_GB/ support files/ shortcuts/ mac/
they`ll show up in the macPS edit/keyboard shortcuts set drop down.
Illustrator , importing from pcCS5 to macCS6.
keyboard shortcuts
I dropped the KYS file (AI keyboard shortcut file) from pcCS5 to macCS6:
"applications/ adobe illustrator cs6/ presets/ en_GB/ Keyboard shortcuts folder."
they show up in mac illustrator when I load them as a custom shortcuts set in the edit/keyboard shortcuts dialog, but not sure yet how well they will work considering mac uses cmmd option, but it may convert them from the pc equivalents ctrl/alt hopefully.
importing workspaces
I copied my unix executable worskpace files from pcCS5 into:
applications/ adobe illustrator cs6/ presets/ en_GB/ workspaces.
I restarted AI but the workspaces from pcCS5 still don`t show up in the workspaces drop down in illust`r macCS6 . not sure why not. I did the same thing with photoshop and it worked there.
importing brushes
just via the brushes dialog box menu in AI macCS6, "open brush library", "other"...

How do i get my home made movies (made with final cut ) into iTunes

How do i get my home made movies (made with final cut ) into iTunes
Thanks
Lee

Use MPEG Streamclip to convert them to MPEG-4, and drag those files into the open iTunes application window.
(65006)

How can I merge all of my iTunes libraries with my wife and kids so we can all share the music?

how can I merge all of my iTunes libraries with my wife and kids so we can all share the music?
There are 3 accounts that I want t o transfer all the music to
Joe

Welcome to the Apple Community.
You can't merge accounts.
You can however share or import content from another library/account using homesharing.

My MacBook has Leopard Printer has asked me to 'embed fonts' in pdf text. I have used Web but mostly out of date or Windows focused. Can you advise me how best to embed fonts on pdf documents created with TextEdit ? Thank you.

My MacBook has Leopard. A printer has asked me to 'embed fonts' in pdf text. I have looked csrefully on Web but mostly out of date or Windows related.
Can you advise me how best to embed fonts on pdf documents created with TextEdit ? Thank you. PippinD

Hi
Level 2 posters and Above can report various posts.
When they do so they have various options that they can attribute as the issue.
I have reported your post.
I found the one block of text very difficult to read.
9:36 PM Monday; January 28, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

Why is my Snow Leopard 10.6.8 suddenly giving me a gray screen and progress bar after I've turned it on? The progress bar takes 4-5 minutes to complete then signing on with my password and all other operations are normal. Solution? Many thanks.

It's starting in safe mode > http://support.apple.com/kb/HT1564
First of all, do a PRAM reset. If it doesn't help, open Terminal and type:
sudo nvram boot-args=""

After updating I can not get over 1000 songs from my library to play. I spent 2 hours with Apple support and he could not fix it. Anybody got any ideas?

After updating I can not get over 1000 songs from my library to play. I spent 2 hours with Apple support and he could not fix it. Anybody got any ideas?

While not exactly the same, I wonder if this would help? http://support.apple.com/kb/TS1967

How do I play my completed 3D movies created with CS5.5 and Cineform Neo3D?

Similar Messages

Maybe you are looking for