How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

myocom,
You can highlight random points in DIAdem as well. 
Here is an example:
Use the cursor to move to the point you wish to highlight.
Press the "Set Data Point and Flag" icon on each data point you wish to highlight
When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
    Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Report with highlights.zip ‏5 KB

Similar Messages

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • How to adjust the left and right Margin in PDF

    Hi,
    I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
    Thanks,
    Malli

    Hi,
    there are only two joins available for InfoSet in BI.
    For more details about Infoset joins you may refer following SAP documentation or serch at forums.
    http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
    I hope it will help.
    Thanks,
    S

  • How can I make an object float to the left or right?

    I am currently working with a site that is designed to fill the browser window.
    I would like my footer elements to attach to the left and right respectively. I know in html this can be accomplished by using "float", but I don't see any way to accomplish this in Muse.
    Am I missing something?

    Hi Skyler,
    If you are looking for the element to remain on screen in same position at all times then I think using the 'pin' option is what you are looking for. With a box (or whatever) selected you'll see an option at the top, next to your x,y co-ordinates with a little square with 6 selectable points, each point representing where the element will stick to.
    Alternatively if you are just wanting the bar of the footer to stretch across the window regardless of size then if you have the left of the bar exactly on the outside left edge of your page, and same with right, it should do the stretching for you automatically.
    Is this what you were meaning?

  • How do I break a stereo audio clip to get the left and right separately

    $subject really. If I break apart a stereo audio clip I just get track 1, I can't get track 2.
    Thanks

    I tried that, but I keep getting "Unsupported Clip" in the channel configuration audio tab of the Inspector.
    Here's my workflow:
    Import Flip cam's h.264/AAC MP4 files
    Edit a clip into a project.
    Break apart the clip, to give separate video and audio segments
    The green audio segment (will have -a1 after the name in the segment) will be say it's an "Unsupported Clip" in the channel configuration audio tab of the Inspector.
    If I change the original clip to dual mono before I break apart I get two mono clips, which is what I was after (but then I could just disable one of the dual mono tracks without splitting apart if that was all I wanted).
    I suggest that getting an "Unsupported Clip" when I break apart these clips is a bug.

  • How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

    I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

    You can use this extension to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

    After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700. 
    now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about  700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
    The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

    Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

  • How to get rid of advertisements that appear on both the left and right of my web browsers

    Recently i noticed that when i open either Firefox or Safari, the page will load but a few seconds later, two identical ads appear on both sides of my browser and partially obstructing the webpage that i'm on... PLEASE HELP!
    this is what it looks like.... http://i43.tinypic.com/2q8aj9s.jpg

    Make sure 'block pop-ups' is selected in both browsers.
    Firefox Preferences>Content tab; Safari Preferences>Security tab.
    For both browsers download AdBlock:
    Firefox - https://addons.mozilla.org/en-US/firefox/search/?q=AdBlock&cat=1%2C0&appver=11.0 &platform=mac
    Safari - https://extensions.apple.com

  • How do I deal with audio, seperate left and right and make each stereo--CS5

    I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks?  Do I have to go to Soundbooth or is there a simple way in Premiere?

    Bill G, tell me what I am missing and I'll use your method.  I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
    I record a lav on one channel, and a different wireless mic on the other.  When captured, I have a clip that PR would normally treat as a single stereo track.
    BEFORE putting any clips on the timeline, select all clips and set channel mapping.  Set each channel to mono.  Now PR treats these as two mono tracks.  The output for each mono is the master track, which in my project is stereo.  I can change "volume" for each track in the mixer, etc.  but each channel is provided to the left and right  master output.
    I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

  • How do I move a page to a new location that is offscreen to the left or right on the planning screen

    When I'm in the planning screen mode, even though I have the thumbnails set on their smallest size, my website is so large that the  branches of the hierarchal layout of webpages and their various subpages stretch out to the left and right far distances off the screen. When I try to move one of the little rectangular webpage icons in the hierarchal layout in Plan Screen mode, I can't move it off screen to the left or right to change its position in my website's horizontal menu.  In other words, even at the smallest setting for the icon webpage thumbnails, there's so many icons that they go off page and I can't move a webpage icon to a position that is currently off-screen to the left or right in the menu layout.
    Any ideas how to do that?  Is there a non-graphical way to do it? Thanks!!!

    Your best bet is to reduce the thumbnail size to the smallest, then turn off thumbnails (to speed redraw), then drag in multiple steps, scrolling the Plan view each time. In the upcoming release of Muse (June 17th) you will be able to collapse vertical stacks of pages, which will means your Plan view won't be as wide. If you collapse each stack, you will only see the top level pages, and you won't have to scroll as many times. Or maybe they will all fit. What you really need is autoscroll in Plan view, which we don't currently have.
    Paul Sorrick
    Muse Engineering

  • How can I separate Left and right audio channels in labview 8.5 tia sal22

    How can I separate Left and right audio channels in labview
    8.5 tia sal22
    Greetings All
    I have a working Labview vi that converts a math formula to an
    audio signal.  I would like to have the
    right and left audio channels playing different math audio signals is this
    possible?
    Example
    Right channel -> plays the audio signal created by a math
    formula
    Left channel -> plays the audio signal created by another
    math formula with adjustable phase control
    I’ve included a VI with a working audio and math formula but
    I’m not sure how to separate the left and right channels.
    I’m using labview 8.5
    I looked up a similar question on the
    support board and it said” use an instance of the the Sound Output Write that
    has a 1D waveform data type input (i.e.  Sound Output Write (DBL)). Each
    element in the array would correspond to a channel.”
    But I’m not exactly sure what he meant.  I’m using a formula to generate the wave file
    Tia sal22
    Attachments:
    fixed mathscript formula to sound test.vi ‏680 KB

    Sorry it took so long to get back.  Here's the new VI with it splitting out the left and right channels. 
    I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops.  I increase the buffers
    but I still get the clicks and pops.  I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in.  Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
    I'm using labview 8.5
    And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
    tia sal22
    Attachments:
    lvt_audio_realtime-out left right device ID test.vi ‏68 KB

  • How to create buttons that control left and right scroll?

    I would like to know if there is a way to create two buttons, each on the left and right hand sides of the screen, that would control the horizontal (x-axis) scroll of my website.  I've built two image buttons that link to anchors located on the left and righthand edges of the page, but this does not achieve the funtionality I'm looking for.  I would like each button to scroll incrementally every time it is pressed. 
    Is this possible in Muse?

    There are no facing pages in Pages 5.
    Peter

Maybe you are looking for

  • No sound from pulling out earphones improperly

    now 00:00 shows up on mi ipod and tried every solution..reset, restored, nothin...sad face appears...now i put it in disk mode...ipod is extremely overheated..windows reads mi ipod and itunes..itunes keeps telling me to try the same things i been doi

  • How to display a xsl linked xml in your jsp?

    I want to have a file like this displayed in my jsp file...any1 know how ? thx http://www.w3schools.com/xsl/cdcatalog_with_xsl.xml

  • Chart data set size

    I only occasionally use numbers 08. When I make a bar chart from a data set the size of the data set seems limited. That is, after a certain size, if I add one more data value to the data set then the chart displays the new item but does not include

  • Cisco 2950 - 24 WS switch express install issue

    Hi Guys, Got a Cisco 2950 24 port switch that I need to setup and I can't seem to get the page for Express install In firefox when trying to connect to 10.0.0.1 I get the message "connection was reset" in internet explorer "page cannot be displayed"

  • I receive a confirm dialog box, when clicking on "stay on page" nothing happens

    I receive a notice that says "stay on page or leave page". When I click on either button nothing happens, then the page locks up and I have to shut down by pressing the power button as nothing will work and restart my computer a Mac Pro new 2012. I g