How do I port forward or open a port on the Airport time capsule to hook p a security system?

I have an airport time capsule and a security system. The installer doesn't know anything about using routers etc, especially on a mac. They say I have to port forward or open a port specifically of this device. I have very few skills when doing this IT type. Is this hard to do? Can I do it myself? He wants to get an IT guy out? $55 an hour, how long would it take? Thanks in advance for anyone who can help!

The method is here.
AirPort - Port Mapping Basics using AirPort Utility v6.x
If you need to get someone in, it depends.. The TC can be recalcitrant.. due to your setup of it following the apple guides.. and it depends on the security system and how simple that is.
There are multiple issues.. for example how do you find your IP address from the web when you have dynamic IP from your ISP.
Do you intend to setup dynamic DNS? Can the camera /dvr system handle Dynamic DNS?
I recommend you read very carefully the instructions for what has been installed.. because merely opening the port is only a small part of the issues involved in remote access to the security system.

Similar Messages

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

how do you set the airport time capsule as the primary base station rather than as a network client?

The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"?

How can I print via the AirPort Time Capsule on a Windows 7?

Hey,
First of all, I am really inexperienced about all these things. I have a MacBook from 2009 with OSX Lion and a PC Windows 7 x64. I have got a time capsule (https://www.mikepalmer.net/wp-content/uploads/2011/12/apple-time-capsule.jpg) connected to my router
and then another router in my room (probably working as an acces point) to which I wirelessly connect my Windows 7.
The thing is that I can see the printer (HP Laserjet P1005) from my Mac but I don't know how to add it to my windows. On a previous PC I added a printer to the time capsule's IP 192.168.1.2 and printed with a considerable delay that way.
As you can see I don't understand how networks work, how IP's work, or how ports work in this matter.
Any help will be much appreciated!!

Hi PGMLEBL,
I am not familiar with Mac product, the best way is ask the HP printer support for the detail support, generally if we know the printer IP address we can add it through add
a network printer, you may can refer the following third party article to add the printer:
how to install a network printer using TCP/IP in Windows 7
http://www.jmu.edu/computing/helpdesk/selfhelp/win7tcpipprinting.shtml
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do you set up the airport + time capsule to a win XP and 7 machines?

All my Apple products can connect just fine but none of my windows machines can access wirelessly. I tried different downloads but none of them seem to work any way for me to rectify this?

For those who are running Windows and controlling the Airport Base Station with Airport for Windows. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

How to connect TP-Link TL-WA850RE(EU) Range extender to airport Time Capsule

please let me know if i can use TP-link range extender to extend my wifi network of my new airport time capule

Apple's "extend a wireless network" feature has been designed to allow other Apple devices to communicate with each other to extend a network wirelessly.
It is unlikely that a 3rd party device could be configured to "extend" a wireless network provided by an Apple router.....but I suppose anything is always possible.
There would be two ways to find out:
1) Try it out yourself. If you think that you might have it set up, we can give you a connection test to verify that the TP Link device is actually extending the wireless signal.....not simply joining it.
2) Wait to hear from another user who has the same products who has set this up. Unfortunately, the chances that another user who has the same products will ever see your post are extremely small....but again, anything is possible.
If you have not already purchased a device to extend the Time Capsule network, an AirPort Express could be configured to extend the network literally automatically in about 2 minutes....and...the Express will extend both bands of your dual band Time Capsule.

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

How do I connect Airport Time Capsule to a Windows Vista Machine?

I was going NUTS trying connect my new Airport Time Capsule v6.xxx to an older Vista Home machine. I searched these posts for an answer and found nothing remotely helpful. After trying a million different things...
Here is how I did it:
Open Airport Utility
Finder>Applications>Utilities>Airport Utility
Click on the image of the Airport Time capsule
Go to top of screen menu Click on EDIT in the little dialog box that pops up once you click EDIT look to the top of the screen and click on BASE STATION
Click on SHOW PASSWORDS, Carefully note the really long WPA Pre Shared Key code for "xxxx"
Go to your Vista machine and down at the bottom you will see you network connection icon. It looks like two computer monitors and a globe. Click once on it and open NETWORK and SHARING CENTER
Click once on SET UP A NETWORK CONNECTION > NEXT > WIRELESS> SET UP CONNECTION OR NETWORK> MANUALLY CONNECT TO A WIRELESS NETWORK>NEXT
Now enter the network name as you set it up in the Airport Utility and then enter the 64 digit WPA PRE SHARED KEY CODE in the SECURITY KEY/PASSPHRASE box
Click NEXT...Your Vista machine should say searching for IP address then it should connect to the Airport. I hope this saves someone the hours I spent messing with this. Good Luck!!!

I just want to extend the system with the time capsule.
Always worries me when I see that..
Do you mean wirelessly extend.. it won't work.. not just because the WRT54GS is G wireless (super G is just extended G)... but because it is not apple router.. apple can only extend wireless between routers that are apple.
You can plug the TC into the linksys via ethernet.. and run it as an AP .. use the same wireless name.. ie ssid and security but use and lock a different wireless channel.. that is better by far as it is then N wireless. you can also set 5ghz to a different name and use that for 5ghz capable stuff.
You can use EOP adapters if you cannot run ethernet but doing it via wireless.. is really not worth it.
Why don't you put the TC in place of the WRT.. and load dd-wrt on the Linksys and use that in universal repeater mode.. that would work.

How to set up AirPort + Time Capsule On the Same Network but make it so only i use it?

Ok so i am planning on getting the AirPort + Time Capsule in a few weeks, and i have seen many peole talk about how there is a right way and wrong way to set it up because apperently the bad way makes it run slow? Well i have two questions, one is how do i set it up the right way to use it to the full potential to use the new beamforming feature? And my second question which is kind of a problem is that I have internet already but my other brothers use it and i told them about pitching in buy it and they dont want to because they think its pointlesss, so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it? (ex. have my wifi, 2WIRE123 for example, and then some how connect the ethernet cable to the airport + time caplsule and create a new network like 2WIRE124 so they would both basiaclly be using the same internet connection but separated to 2 diffrent networks?) Thank You.

so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it?
Sorry, but no.
If you can connect the AirPort to the 2Wire router using a permanent wired Ethernet connection, then you can configure the AirPort to create a new wireless network with its own wireless network name and password.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

How to connect my airport time capsule to my at

Am I missing some kind of special cord? I can start the software and the software recognizes the airport time capsule only if I plug the single ethenet cord into the time capule not the AT&T router.
Anyone have a minute to help a big dummy here?

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

How do I port forward or open a port on the Airport time capsule to hook p a security system?

Similar Messages

Maybe you are looking for