How do I position an image exactly on top of a guideline.

When I give more Zoom realize that the image is far from the line, but I can not drag the image, it passes the line when I try poscionar.

Its is also good to work with smart guides combined with "snap to" option selected as semaphoric suggested, this will then show you when you touch the guide and you can release the object to snap. View>Show>Smart Guides
Also if you hold control you get this display which helps with aligning and positioning...

Similar Messages

How do you position an image inside a photo box?

I'm trying to create a 20 page 16x8 book and I cannot figure out how, after putting a photo box on the page, and dropping an image into it, how do I move the image around inside of it. For instance if I create a square photo box, how do I position a 3:2 image inside of it?

Double click it.
RB

Lightbox 2 -size & position of image

By default, the new image opens in the centre of the page and
is cropped to a default size. How can I adjust the code so that it
opens at a specific location and expands to specific size, please?
I want to use the code for single images of same size and to open
always at the same location..

thanks. they have a forum, named huddletogether, but that is
pretty well useless. Although same problem has been posted many
times, the developer and others have not replied.... Apparently,
the developer is TOO BUSY to attend to trivia like replying to
questions about his OWN product. Pretty poor... I say...Not
everyone wants the box to open in the centre of the page..:-((
Hence my post here, in hope that someone might have the solution?
UPDATE at 16.00gmt. I have played around with the code in the
lightbox.js file. Line 237 has a line :
this.lightbox.setStyle({ top: lightboxTop + 'px', left:
lightboxLeft + 'px' }).show();
I have added couple values, which position the image exactly
where I want it. As:
this.lightbox.setStyle({ top:160+ 'px',
left:(-100+lightboxLeft)+ 'px' }).show();
However, I am still looking for the code which gets the
image's dimensions.... Maybe, there is no such a thing, as the
enlarged images are always shown the same size; they are
increased/decreased to the default value...
Any ideas, please?
UPDATE: That's all sorted. But as a result, the 'close' and
'load' images are now showing far, far too big and in wrong
position...

Position the cursor at the top of the JTextArea?

How do you position the cursor or document at the top of the JTextArea. When I set the JTextArea to some text that exceeds the JTextArea ScrollPane it scrolls to the bottom of the document. How do you position the document to the top of the JTextArea?
thanks,
Peter

setCaretPosition(0);

How to fill up image exactly with other image

I have two pictures of a pigeon. The background image is the ideal posture of a pigeon. The foreground image was taken by me and is not the ideal posture of a pigeon. I want to transform the foreground image so that the foreground image matches the background image exactly. What are common techniques or best practices in Photoshop to do this? I have tried to do this with CTRL + T with warp modus, but i don't know how to use this without disfigure the other parts of the pigeon. I have tried puppet warp as well, but i don't know how to use this in this case.
Thanks!

Well there's also Liquify under Filters which allows you to warp pixels using brushes. But I would probably stick to Free Transform Warp and/or Puppet Warp for this. It's a bit of a tricky task this and will require some work and the end result is up to your material quality, picture resolution and patience. I know, not much help, but a suggestion to begin with would be to scale the pigeon images so they match each other as closely as possible and then get busy pushing your pixels around.
BTW search YouTube on some tips on how to use Free Transform Warp and Puppet Warp. It's always easies getting visual help from a video than trying to explain this with words...

How can i replicate this images drop shadow exactly

How can i replicate this images drop shadow exactly from scratch
http://i52.tinypic.com/2u41t7n.jpg
If this sort of thing is not covered on this forum please direct me to an off site forum that would help me with this graphics question

Trial and error, putting both the reference image and your new experimental image up side by side, is the only way I know. I'd probably use the Info panel as well, to see that I'm getting the same or very similar color numbers from the new drop shadow.
You can probably use the Magic Wand set to a very low tolerance value to select and copy the light colored object, then make a new document with a white background, paste in the copied object, then start experimenting with drop shadow. Alternatively you could just redraw a portion of it.
-Noel

How do I position a Loader image inside a Sprite?

In AS3 / CS4 I'm trying to programmatically create a bunch of rectangular objects, let's call them 'cards', that will contain an image and a colored background and eventually some other elements like text. I want to create alot of these cards and move them around inside of a larger panel (also a Sprite) of sorts. I can successfully create colored rectangles in my cards and place the cards where I want in the panel, but whenever I try to add an image to a card, I can't seem to position the image inside the card's coordinate space, it ends up being placed inside the larger panel's coordinate space instead, even though I'm adding the image/loader as a child of the card. I thought maybe it had something to do with having to wait until the image loading was complete, so I added the listener as a test but that didn't work. Here's the code:
            var cont:Sprite = new Sprite(); containing 'card'
            var rect:Sprite = new Sprite(); // draw a colored rectangle in the card
            var loader:Loader = new Loader();
            loader.contentLoaderInfo.addEventListener(Event.COMPLETE, positionLoader);
            rect.graphics.beginFill(0xbb3399);
            rect.graphics.drawRect(60,60,99,99); // this works as expected
            rect.graphics.endFill();
            cont.addChild(rect);
            addChild(cont);
            var req:URLRequest = new URLRequest("top.png");
            loader.load(req);
            function positionLoader(e:Event):void {
                loader.x = 30; // position the image inside the containing card
                loader.y = 30;
                cont.addChild(loader); // add the image to the card

I solved this problem.

How do I use copyprofile, image manager and create a wim file to Sysprep a reference Windows 8 computer.

Im trying to deploy a reference machine (configured) to other machines (exact or close image) with different hardware.
I have successfully used sysprep in out of the box, generalise, shutdown mode although i havent tried to deploy this to another device. Unfortunately it doesnt copy the profile to default.
I understand that I have to create an answer file using image manager based on that image, save it to a usb drive and attach this in the sysprep command line when sysprepping it.
My problem is I dont know how to easily capture an image of windows 8 into a wim file so that i can add this into image manager to create a answer file. Im also not sure what I have to do in image manager, is it a simple matter of creating and saving
the answer file or do i have to configure it to copy the profile specifically (theres only one account anyhow).
I also want to know if i have to attach the drivers or are all the standard drivers put into the sysprep image as standard. I would like the machine to be an exactly replica, same as doing a clone (but with the drivers for the new machine installed
so it will boot) same as doing a clone and then repair? If thats possible.
Any specific instructions on this would be helpful. I have read the microsft links but they are somewhat confusing.

I know this is a very late response but I thought I'd post for others who search.
The easiest way to create the .wim file is via WinPE, this guy's two YouTube videos explain the entire process in detail -
Windows 8 ADK Part 1: Capture an OS image - https://www.youtube.com/watch?v=XJ8zKX_8E9w
Windows 8 ADK Part 2: Windows Image Deployment - https://www.youtube.com/watch?v=HHIvoqSw_FI
Here's a quick rundown from my notes:
WINPE
Create WinPE via imaging tools command prompt
copype amd64 c:\winpe
makewinpemedia /iso "c:\winpe" "c:\winpe\winpe64.iso"
UNATTEND
Open Windows System Image Manager
Configure unattend.xml
Save unattend.xml to sysprep folder
Create script and save it to sysprep folder to launch sysprep with unattend
@echo off
cd C:\Windows\System32\sysprep
Sysprep /oob /generalize /unattend:C:\Windows\System32\sysprep\unattend.xml
SYSPREP
C:\Windows\System32\Sysprep
Run as administrator
OOBE/Generalize
Shutdown
CONFIGURATION of WINPE
Set IP - netsh int ip set address "Local Area Connection" static 192.168.1.2 255.255.255.0 192.168.1.1
Set DNS - netsh int ip set dns name = "Local Area Connection" source = static addr = 192.168.1.4 validate = no
Map Network Name - net use z:
\\WindowsADK\reflex\images password /USER:domain.local\username
DISKPART
diskpart
list disk
select disk zero
list partition
select partition 2 (OS partition #)
Assign letter=S (assigns drive letter to partition)
Exit
DISM
dism /capture-image /imagefile:z:\image.wim /capturedir:s:\ /name:"Windows 8.1 Custom"
Verify image is saved in the image share (z:)
http://www.microsoftfanboys.com

How do i make an image pause in a flash movie clip

Please can someone help me. I am trying to find out how to pause or stop an image in a basic flash movie clip, after it has entered from one side and before it exits the other side.
I have been trying to work it out myself for three days but no joy. I am practicing for a test with a training agency which gave me a disk to use but nowhere in it does it say how this is done. I am also having a lot of difficulty making stop start buttons work with this movie clip. I am using a trial cs5.5 version of Flash which expires in 7 days so i need to know this soon. I am up to speed on most of the features, its just this one thing that has me stumped. A lot of the tutorials or examples i have found on the net are very long winded and hard to follow exactly. Could someone let me know, step by step the sequence i should follow after i have created an object and made it go from one side of the stage to the other.

Hi
Thank you for getting back to me. Yes i am using a timeline tween. I have an image on my stage which moves in from one side and out the other side. I am trying to stop or pause the image. The effect i will be asked to reproduce in my exam will be something very much like the banner on the website http://www,iactweb.com. If you go to this website you will see images arrive on the banner and pause before exiting the other side. I am fairly up to speed on all the aspects of getting this effect but i have forgotten what i learned during the course on how stop or pause the images. I am using the trial cs5.5 version of flash . Thanks again for getting back to me.

When I open a new window in FFox7, how can I make it automatically appear exactly on top of the previous window -- not resized, not shifted, but directly on top?

I used to set Firefox to full screen; but my new monitor is too big to do that. So I sized the Firefox window to the size I want, and I carefully centered it (using a tape measure to get it as close to dead center as possible).
But everytime I open a new window, it appears shifted slightly to the right (I think that's called cascading, but I'm not sure). While some might like this feature, I prefer it open exactly on top of the previous window; and it's a pain to have to shift the new window manually every time I open one.
How do I set Firefox to open new windows right on top of the parent window (and the same size), covering it up completely?
Thanks,
Dafydd abHugh

Well, then isn't there some way to induce Firefox to give Windows parameters that make it open the fershlugginer window in the *same* position, instead of an offset position?
Dafydd

How can I delete the image in my e-mails?

I'm having difficulty deleting or changing the e-mail image that appears automatically in e-mails. I gather they appear on e-mails sent to other Mac Mail uses, but not otherwise. I'd like to simply remove the image. Yet even when I delete the image altogether using the edit image tools in Address Book, one of the stock images from Apple's library keeps showing up. Can I not have the e-mails appear without any image on them. I've poked around a bit with both Address Book and System Preferences, and wonder what the difference is between those two image functions. There are separate images for each user on my iMac, but I'm having difficulty figuring exactly how to manage and control those images in System Preferences and Address Book.
Can anyone point to Apple documentation that might help me?
No opinions, please.
Using

but cannot see how to simply delete an image.
As far as I know, there is no way to delete the image. I've not heard of a way to do so. It there is a way, someone may chime in; in the meantime, you might want to try checking out the "more like this" section on the right of the page.
No opinions means I'm looking for answers based on technical knowledge.
FWIW, you do know that these forums are user to user only? Some people here are tech experts and many others extremely knowledgeable, but not necessarily techs. We learn and share what we've learned.

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

How do I change an image border color to another color - Dreamweaver CS5?

Good day,
I have just learned how to add a border to an image with Dreamweaver CS5 within the Properties Inspector.
After typing the width in pixels in the Border Text Field and pressing the Enter key, Dreamweaver created a black border.
How do I change the image border color to another color?

I added your suggested rule to the Style Sheet "in any order" as you explained. See the image below.
However this did not change the image border from black to light blue. In fact, nothing changed.
Nothing changed because the CSS that has been written into DW is incorrectly written.
You want the following (exactly as written below)
img {border: 4px solid #0062C8;}
You've inadvertently wrapped the rule inside a #main_image container rendering it meaningless.
It's easiest to go into Code View and change
#main_image {
img {border: 4px solid #0062C8;
to
img { border: 4px solid #0062C8; }
The Property Inspector added a border exactly as I wanted it, other than the color I wanted the border to be. What is the use of this function in Property Inspector if it can add a border within Property Inspector but not let me change the COLOR of the black border that Property Inspector added, to another color?
That's a deceptively simple, yet valid, question with a long answer.
Back in the dark old days of web design web designers were restricted to inline HTML formatting which offered border properties but no colors.
CSS styling offers colors and more but has to be written differently.
These days. it's best to avoid HTML formatting. Unfortunately border="4px" in the PI still allows it. But does not permit color.
Does anyone else out there ever add color borders to their IMAGES (not the containing box for the image) ?
Yes, using CSS.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How to insert or upload image in RichTextEditor ?

Hello everyone,
I am new to flex and trying to design a full-fledged RichTextEditor in flex builder,Can anyone tell me how to add or upload image
in RichTextEditor at users cursor location ?
also user should be able to resize and move the image around the text editor.

It can be done in either. There are 3 steps.
Learn about greenscreen (keying) including lighting, filming, best formats for video (the way they do it in the weather segment) or masking and roto.
learn about image editing including sizing images, color correcting, applying effects
learn about controlling motion and editing duration of stills in a NLE or After Effects
When you have a few of these basics down and have designed your production you then load up the video and the stills, key out the background or mask around your talent to separate the talent from the background, add your photos to the time line and animate their duration and position.
This is extremely basic stuff that can be accomplished in a NLE or in AE. You can basically reproduce just about any effect you've ever seen in a movie in AE with the right planning and plug-ins. You can do just about anything you've ever seen in a news broadcast in any modern NLE.

How do I position an image exactly on top of a guideline.

Similar Messages

Maybe you are looking for